1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <asm/hardware.h> 15 16 #define CONFIG_SYS_TEXT_BASE 0x73f00000 17 18 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 19 20 /* ARM asynchronous clock */ 21 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 22 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 23 24 #define CONFIG_AT91SAM9M10G45EK 25 26 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 27 #define CONFIG_SETUP_MEMORY_TAGS 28 #define CONFIG_INITRD_TAG 29 #define CONFIG_SKIP_LOWLEVEL_INIT 30 #define CONFIG_BOARD_EARLY_INIT_F 31 #define CONFIG_DISPLAY_CPUINFO 32 33 #define CONFIG_CMD_BOOTZ 34 #define CONFIG_OF_LIBFDT 35 36 #define CONFIG_SYS_GENERIC_BOARD 37 38 /* general purpose I/O */ 39 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 40 #define CONFIG_AT91_GPIO 41 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 42 43 /* serial console */ 44 #define CONFIG_ATMEL_USART 45 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 46 #define CONFIG_USART_ID ATMEL_ID_SYS 47 48 /* LCD */ 49 #define CONFIG_LCD 50 #define LCD_BPP LCD_COLOR8 51 #define CONFIG_LCD_LOGO 52 #undef LCD_TEST_PATTERN 53 #define CONFIG_LCD_INFO 54 #define CONFIG_LCD_INFO_BELOW_LOGO 55 #define CONFIG_SYS_WHITE_ON_BLACK 56 #define CONFIG_ATMEL_LCD 57 #define CONFIG_ATMEL_LCD_RGB565 58 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 59 /* board specific(not enough SRAM) */ 60 #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 61 62 /* LED */ 63 #define CONFIG_AT91_LED 64 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 65 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 66 67 #define CONFIG_BOOTDELAY 3 68 69 /* 70 * BOOTP options 71 */ 72 #define CONFIG_BOOTP_BOOTFILESIZE 73 #define CONFIG_BOOTP_BOOTPATH 74 #define CONFIG_BOOTP_GATEWAY 75 #define CONFIG_BOOTP_HOSTNAME 76 77 /* 78 * Command line configuration. 79 */ 80 81 /* No NOR flash */ 82 #define CONFIG_SYS_NO_FLASH 83 #define CONFIG_CMD_PING 84 #define CONFIG_CMD_DHCP 85 #define CONFIG_CMD_NAND 86 #define CONFIG_CMD_USB 87 88 /* SDRAM */ 89 #define CONFIG_NR_DRAM_BANKS 1 90 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 91 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 92 93 #define CONFIG_SYS_INIT_SP_ADDR \ 94 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 95 96 /* NAND flash */ 97 #ifdef CONFIG_CMD_NAND 98 #define CONFIG_NAND_ATMEL 99 #define CONFIG_SYS_MAX_NAND_DEVICE 1 100 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 101 #define CONFIG_SYS_NAND_DBW_8 102 /* our ALE is AD21 */ 103 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 104 /* our CLE is AD22 */ 105 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 106 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 107 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 108 109 #endif 110 111 /* MMC */ 112 #define CONFIG_CMD_MMC 113 114 #ifdef CONFIG_CMD_MMC 115 #define CONFIG_MMC 116 #define CONFIG_GENERIC_MMC 117 #define CONFIG_GENERIC_ATMEL_MCI 118 #endif 119 120 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) 121 #define CONFIG_CMD_FAT 122 #define CONFIG_DOS_PARTITION 123 #endif 124 125 /* Ethernet */ 126 #define CONFIG_MACB 127 #define CONFIG_RMII 128 #define CONFIG_NET_RETRY_COUNT 20 129 #define CONFIG_RESET_PHY_R 130 #define CONFIG_AT91_WANTS_COMMON_PHY 131 132 /* USB */ 133 #define CONFIG_USB_EHCI 134 #define CONFIG_USB_EHCI_ATMEL 135 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 136 #define CONFIG_USB_STORAGE 137 138 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 139 140 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 141 #define CONFIG_SYS_MEMTEST_END 0x23e00000 142 143 #ifdef CONFIG_SYS_USE_NANDFLASH 144 /* bootstrap + u-boot + env in nandflash */ 145 #define CONFIG_ENV_IS_IN_NAND 146 #define CONFIG_ENV_OFFSET 0xc0000 147 #define CONFIG_ENV_OFFSET_REDUND 0x100000 148 #define CONFIG_ENV_SIZE 0x20000 149 150 #define CONFIG_BOOTCOMMAND \ 151 "nand read 0x70000000 0x200000 0x300000;" \ 152 "bootm 0x70000000" 153 #define CONFIG_BOOTARGS \ 154 "console=ttyS0,115200 earlyprintk " \ 155 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 156 "256k(env),256k(env_redundant),256k(spare)," \ 157 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 158 "root=/dev/mtdblock7 rw rootfstype=jffs2" 159 #elif CONFIG_SYS_USE_MMC 160 /* bootstrap + u-boot + env + linux in mmc */ 161 #define FAT_ENV_INTERFACE "mmc" 162 /* 163 * We don't specify the part number, if device 0 has partition table, it means 164 * the first partition; it no partition table, then take whole device as a 165 * FAT file system. 166 */ 167 #define FAT_ENV_DEVICE_AND_PART "0" 168 #define FAT_ENV_FILE "uboot.env" 169 #define CONFIG_ENV_IS_IN_FAT 170 #define CONFIG_FAT_WRITE 171 #define CONFIG_ENV_SIZE 0x4000 172 173 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 174 "mtdparts=atmel_nand:" \ 175 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ 176 "root=/dev/mmcblk0p2 rw rootwait" 177 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ 178 "fatload mmc 0:1 0x72000000 zImage; " \ 179 "bootz 0x72000000 - 0x71000000" 180 #endif 181 182 #define CONFIG_BAUDRATE 115200 183 184 #define CONFIG_SYS_PROMPT "U-Boot> " 185 #define CONFIG_SYS_CBSIZE 256 186 #define CONFIG_SYS_MAXARGS 16 187 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 188 #define CONFIG_SYS_LONGHELP 189 #define CONFIG_CMDLINE_EDITING 190 #define CONFIG_AUTO_COMPLETE 191 #define CONFIG_SYS_HUSH_PARSER 192 193 /* 194 * Size of malloc() pool 195 */ 196 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 197 198 /* Defines for SPL */ 199 #define CONFIG_SPL_FRAMEWORK 200 #define CONFIG_SPL_TEXT_BASE 0x300000 201 #define CONFIG_SPL_MAX_SIZE 0x010000 202 #define CONFIG_SPL_STACK 0x310000 203 204 #define CONFIG_SPL_LIBCOMMON_SUPPORT 205 #define CONFIG_SPL_LIBGENERIC_SUPPORT 206 #define CONFIG_SPL_SERIAL_SUPPORT 207 #define CONFIG_SPL_GPIO_SUPPORT 208 209 #define CONFIG_SYS_MONITOR_LEN 0x80000 210 211 #ifdef CONFIG_SYS_USE_MMC 212 213 #define CONFIG_SPL_BSS_START_ADDR 0x70000000 214 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 215 #define CONFIG_SYS_SPL_MALLOC_START 0x70080000 216 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 217 218 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds 219 #define CONFIG_SPL_MMC_SUPPORT 220 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 221 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 222 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 223 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 224 #define CONFIG_SPL_FAT_SUPPORT 225 #define CONFIG_SPL_LIBDISK_SUPPORT 226 227 #elif CONFIG_SYS_USE_NANDFLASH 228 #define CONFIG_SPL_NAND_SUPPORT 229 #define CONFIG_SPL_NAND_DRIVERS 230 #define CONFIG_SPL_NAND_BASE 231 #define CONFIG_SPL_NAND_ECC 232 #define CONFIG_SPL_NAND_SOFTECC 233 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 234 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 235 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 236 237 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 238 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 239 #define CONFIG_SYS_NAND_PAGE_COUNT 64 240 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 241 #define CONFIG_SYS_NAND_ECCSIZE 256 242 #define CONFIG_SYS_NAND_ECCBYTES 3 243 #define CONFIG_SYS_NAND_OOBSIZE 64 244 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 245 48, 49, 50, 51, 52, 53, 54, 55, \ 246 56, 57, 58, 59, 60, 61, 62, 63, } 247 #endif 248 249 #define CONFIG_SPL_ATMEL_SIZE 250 #define CONFIG_SYS_MASTER_CLOCK 132096000 251 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 252 #define CONFIG_SYS_MCKR 0x1301 253 #define CONFIG_SYS_MCKR_CSS 0x1302 254 255 #define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0 256 #endif 257