1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #define CONFIG_AT91_LEGACY 31 32 /* ARM asynchronous clock */ 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 34 #define CONFIG_SYS_HZ 1000 35 36 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ 37 #ifdef CONFIG_AT91SAM9M10G45EK 38 #define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/ 39 #else 40 #define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ 41 #endif 42 #define CONFIG_ARCH_CPU_INIT 43 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ 44 45 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 46 #define CONFIG_SETUP_MEMORY_TAGS 1 47 #define CONFIG_INITRD_TAG 1 48 49 #define CONFIG_SKIP_LOWLEVEL_INIT 50 #define CONFIG_SKIP_RELOCATE_UBOOT 51 52 /* 53 * Hardware drivers 54 */ 55 #define CONFIG_AT91_GPIO 1 56 #define CONFIG_ATMEL_USART 1 57 #undef CONFIG_USART0 58 #undef CONFIG_USART1 59 #undef CONFIG_USART2 60 #define CONFIG_USART3 1 /* USART 3 is DBGU */ 61 62 /* LCD */ 63 #define CONFIG_LCD 1 64 #define LCD_BPP LCD_COLOR8 65 #define CONFIG_LCD_LOGO 1 66 #undef LCD_TEST_PATTERN 67 #define CONFIG_LCD_INFO 1 68 #define CONFIG_LCD_INFO_BELOW_LOGO 1 69 #define CONFIG_SYS_WHITE_ON_BLACK 1 70 #define CONFIG_ATMEL_LCD 1 71 #define CONFIG_ATMEL_LCD_RGB565 1 72 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 73 /* board specific(not enough SRAM) */ 74 #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 75 76 /* LED */ 77 #define CONFIG_AT91_LED 78 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 79 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 80 81 #define CONFIG_BOOTDELAY 3 82 83 /* 84 * BOOTP options 85 */ 86 #define CONFIG_BOOTP_BOOTFILESIZE 1 87 #define CONFIG_BOOTP_BOOTPATH 1 88 #define CONFIG_BOOTP_GATEWAY 1 89 #define CONFIG_BOOTP_HOSTNAME 1 90 91 /* 92 * Command line configuration. 93 */ 94 #include <config_cmd_default.h> 95 #undef CONFIG_CMD_BDI 96 #undef CONFIG_CMD_FPGA 97 #undef CONFIG_CMD_IMI 98 #undef CONFIG_CMD_IMLS 99 #undef CONFIG_CMD_AUTOSCRIPT 100 #undef CONFIG_CMD_LOADS 101 102 #define CONFIG_CMD_PING 1 103 #define CONFIG_CMD_DHCP 1 104 #define CONFIG_CMD_NAND 1 105 #define CONFIG_CMD_USB 1 106 107 /* SDRAM */ 108 #define CONFIG_NR_DRAM_BANKS 1 109 #define PHYS_SDRAM 0x70000000 110 #define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ 111 112 /* DataFlash */ 113 #ifdef CONFIG_ATMEL_SPI 114 #define CONFIG_CMD_SF 115 #define CONFIG_CMD_SPI 116 #define CONFIG_SPI_FLASH 1 117 #define CONFIG_SPI_FLASH_ATMEL 1 118 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 119 #endif 120 121 /* NOR flash, if populated */ 122 #ifndef CONFIG_CMD_NAND 123 #define CONFIG_SYS_NO_FLASH 1 124 #else 125 #define CONFIG_SYS_FLASH_CFI 1 126 #define CONFIG_FLASH_CFI_DRIVER 1 127 #define PHYS_FLASH_1 0x10000000 128 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 129 #define CONFIG_SYS_MAX_FLASH_SECT 256 130 #define CONFIG_SYS_MAX_FLASH_BANKS 1 131 #endif 132 133 /* NAND flash */ 134 #ifdef CONFIG_CMD_NAND 135 #define CONFIG_NAND_MAX_CHIPS 1 136 #define CONFIG_NAND_ATMEL 137 #define CONFIG_SYS_MAX_NAND_DEVICE 1 138 #define CONFIG_SYS_NAND_BASE 0x40000000 139 #define CONFIG_SYS_NAND_DBW_8 1 140 /* our ALE is AD21 */ 141 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 142 /* our CLE is AD22 */ 143 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 144 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 145 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 146 147 #endif 148 149 /* Ethernet */ 150 #define CONFIG_MACB 1 151 #define CONFIG_RMII 1 152 #define CONFIG_NET_MULTI 1 153 #define CONFIG_NET_RETRY_COUNT 20 154 #define CONFIG_RESET_PHY_R 1 155 156 /* USB */ 157 #define CONFIG_USB_ATMEL 158 #define CONFIG_USB_OHCI_NEW 1 159 #define CONFIG_DOS_PARTITION 1 160 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 161 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ 162 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" 163 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 164 #define CONFIG_USB_STORAGE 1 165 166 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 167 168 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 169 #define CONFIG_SYS_MEMTEST_END 0x23e00000 170 171 #ifdef CONFIG_SYS_USE_DATAFLASH 172 173 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 174 #define CONFIG_ENV_IS_IN_SPI_FLASH 1 175 #define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400) 176 #define CONFIG_ENV_OFFSET 0x4200 177 #define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET) 178 #define CONFIG_ENV_SIZE 0x4200 179 #define CONFIG_ENV_SECT_SIZE 0x10000 180 #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" 181 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 182 "root=/dev/mtdblock0 " \ 183 "mtdparts=atmel_nand:-(root) "\ 184 "rw rootfstype=jffs2" 185 186 #else /* CONFIG_SYS_USE_NANDFLASH */ 187 188 /* bootstrap + u-boot + env + linux in nandflash */ 189 #define CONFIG_ENV_IS_IN_NAND 1 190 #define CONFIG_ENV_OFFSET 0x60000 191 #define CONFIG_ENV_OFFSET_REDUND 0x80000 192 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 193 #define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" 194 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 195 "root=/dev/mtdblock5 " \ 196 "mtdparts=atmel_nand:128k(bootstrap)ro, \ 197 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \ 198 2M(linux),-(root) " \ 199 "rw rootfstype=jffs2" 200 201 #endif 202 203 #define CONFIG_BAUDRATE 115200 204 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } 205 206 #define CONFIG_SYS_PROMPT "U-Boot> " 207 #define CONFIG_SYS_CBSIZE 256 208 #define CONFIG_SYS_MAXARGS 16 209 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 210 #define CONFIG_SYS_LONGHELP 1 211 #define CONFIG_CMDLINE_EDITING 1 212 #define CONFIG_AUTO_COMPLETE 213 #define CONFIG_SYS_HUSH_PARSER 214 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 215 216 /* 217 * Size of malloc() pool 218 */ 219 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 220 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ 221 222 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ 223 224 #ifdef CONFIG_USE_IRQ 225 #error CONFIG_USE_IRQ not supported 226 #endif 227 228 #endif 229