1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2007-2008 4 * Stelian Pop <stelian@popies.net> 5 * Lead Tech Design <www.leadtechdesign.com> 6 * 7 * Configuation settings for the AT91SAM9263EK board. 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* 14 * SoC must be defined first, before hardware.h is included. 15 * In this case SoC is defined in boards.cfg. 16 */ 17 #include <asm/hardware.h> 18 19 /* ARM asynchronous clock */ 20 #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ 21 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 22 23 #define CONFIG_ARCH_CPU_INIT 24 25 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 26 #define CONFIG_SETUP_MEMORY_TAGS 1 27 #define CONFIG_INITRD_TAG 1 28 29 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH 30 #define CONFIG_SKIP_LOWLEVEL_INIT 31 #else 32 #define CONFIG_SYS_USE_NORFLASH 33 #endif 34 35 /* 36 * Hardware drivers 37 */ 38 #define CONFIG_ATMEL_LEGACY 39 40 /* LCD */ 41 #define LCD_BPP LCD_COLOR8 42 #define CONFIG_LCD_LOGO 1 43 #undef LCD_TEST_PATTERN 44 #define CONFIG_LCD_INFO 1 45 #define CONFIG_LCD_INFO_BELOW_LOGO 1 46 #define CONFIG_ATMEL_LCD 1 47 #define CONFIG_ATMEL_LCD_BGR555 1 48 49 /* 50 * BOOTP options 51 */ 52 #define CONFIG_BOOTP_BOOTFILESIZE 1 53 54 /* SDRAM */ 55 #define CONFIG_NR_DRAM_BANKS 1 56 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 57 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 58 59 #define CONFIG_SYS_INIT_SP_ADDR \ 60 (ATMEL_BASE_SRAM1 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) 61 62 /* NOR flash, if populated */ 63 #ifdef CONFIG_SYS_USE_NORFLASH 64 #define CONFIG_SYS_FLASH_CFI 1 65 #define CONFIG_FLASH_CFI_DRIVER 1 66 #define PHYS_FLASH_1 0x10000000 67 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 68 #define CONFIG_SYS_MAX_FLASH_SECT 256 69 #define CONFIG_SYS_MAX_FLASH_BANKS 1 70 71 #define CONFIG_SYS_MONITOR_SEC 1:0-3 72 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 73 #define CONFIG_SYS_MONITOR_LEN (256 << 10) 74 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000) 75 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE) 76 77 /* Address and size of Primary Environment Sector */ 78 #define CONFIG_ENV_SIZE 0x10000 79 80 #define CONFIG_EXTRA_ENV_SETTINGS \ 81 "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 82 "update=" \ 83 "protect off ${monitor_base} +${filesize};" \ 84 "erase ${monitor_base} +${filesize};" \ 85 "cp.b ${fileaddr} ${monitor_base} ${filesize};" \ 86 "protect on ${monitor_base} +${filesize}\0" 87 88 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 89 #define MASTER_PLL_MUL 171 90 #define MASTER_PLL_DIV 14 91 #define MASTER_PLL_OUT 3 92 93 /* clocks */ 94 #define CONFIG_SYS_MOR_VAL \ 95 (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) 96 #define CONFIG_SYS_PLLAR_VAL \ 97 (AT91_PMC_PLLAR_29 | \ 98 AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ 99 AT91_PMC_PLLXR_PLLCOUNT(63) | \ 100 AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ 101 AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) 102 103 /* PCK/2 = MCK Master Clock from PLLA */ 104 #define CONFIG_SYS_MCKR1_VAL \ 105 (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ 106 AT91_PMC_MCKR_MDIV_2) 107 108 /* PCK/2 = MCK Master Clock from PLLA */ 109 #define CONFIG_SYS_MCKR2_VAL \ 110 (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ 111 AT91_PMC_MCKR_MDIV_2) 112 113 /* define PDC[31:16] as DATA[31:16] */ 114 #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 115 /* no pull-up for D[31:16] */ 116 #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 117 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ 118 #define CONFIG_SYS_MATRIX_EBICSA_VAL \ 119 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ 120 AT91_MATRIX_CSA_EBI_CS1A) 121 122 /* SDRAM */ 123 /* SDRAMC_MR Mode register */ 124 #define CONFIG_SYS_SDRC_MR_VAL1 0 125 /* SDRAMC_TR - Refresh Timer register */ 126 #define CONFIG_SYS_SDRC_TR_VAL1 0x13C 127 /* SDRAMC_CR - Configuration register*/ 128 #define CONFIG_SYS_SDRC_CR_VAL \ 129 (AT91_SDRAMC_NC_9 | \ 130 AT91_SDRAMC_NR_13 | \ 131 AT91_SDRAMC_NB_4 | \ 132 AT91_SDRAMC_CAS_3 | \ 133 AT91_SDRAMC_DBW_32 | \ 134 (1 << 8) | /* Write Recovery Delay */ \ 135 (7 << 12) | /* Row Cycle Delay */ \ 136 (2 << 16) | /* Row Precharge Delay */ \ 137 (2 << 20) | /* Row to Column Delay */ \ 138 (5 << 24) | /* Active to Precharge Delay */ \ 139 (1 << 28)) /* Exit Self Refresh to Active Delay */ 140 141 /* Memory Device Register -> SDRAM */ 142 #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 143 #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 144 #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 145 #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 146 #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 147 #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 148 #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 149 #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 150 #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 151 #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 152 #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 153 #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 154 #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 155 #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 156 #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 157 #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 158 #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 159 #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 160 161 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 162 #define CONFIG_SYS_SMC0_SETUP0_VAL \ 163 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 164 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 165 #define CONFIG_SYS_SMC0_PULSE0_VAL \ 166 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 167 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 168 #define CONFIG_SYS_SMC0_CYCLE0_VAL \ 169 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 170 #define CONFIG_SYS_SMC0_MODE0_VAL \ 171 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 172 AT91_SMC_MODE_DBW_16 | \ 173 AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) 174 175 /* user reset enable */ 176 #define CONFIG_SYS_RSTC_RMR_VAL \ 177 (AT91_RSTC_KEY | \ 178 AT91_RSTC_MR_URSTEN | \ 179 AT91_RSTC_MR_ERSTL(15)) 180 181 /* Disable Watchdog */ 182 #define CONFIG_SYS_WDTC_WDMR_VAL \ 183 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 184 AT91_WDT_MR_WDV(0xfff) | \ 185 AT91_WDT_MR_WDDIS | \ 186 AT91_WDT_MR_WDD(0xfff)) 187 188 #endif 189 #endif 190 191 /* NAND flash */ 192 #ifdef CONFIG_CMD_NAND 193 #define CONFIG_NAND_ATMEL 194 #define CONFIG_SYS_MAX_NAND_DEVICE 1 195 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 196 #define CONFIG_SYS_NAND_DBW_8 1 197 /* our ALE is AD21 */ 198 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 199 /* our CLE is AD22 */ 200 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 201 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 202 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 203 #endif 204 205 /* Ethernet */ 206 #define CONFIG_RESET_PHY_R 1 207 #define CONFIG_AT91_WANTS_COMMON_PHY 208 209 /* USB */ 210 #define CONFIG_USB_ATMEL 211 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 212 #define CONFIG_USB_OHCI_NEW 1 213 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 214 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ 215 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" 216 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 217 218 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 219 220 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 221 #define CONFIG_SYS_MEMTEST_END 0x23e00000 222 223 #ifdef CONFIG_SYS_USE_DATAFLASH 224 225 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 226 #define CONFIG_ENV_OFFSET 0x4200 227 #define CONFIG_ENV_SIZE 0x4200 228 #define CONFIG_ENV_SECT_SIZE 0x210 229 #define CONFIG_ENV_SPI_MAX_HZ 15000000 230 #define CONFIG_BOOTCOMMAND "sf probe 0; " \ 231 "sf read 0x22000000 0x84000 0x294000; " \ 232 "bootm 0x22000000" 233 234 #elif CONFIG_SYS_USE_NANDFLASH 235 236 /* bootstrap + u-boot + env + linux in nandflash */ 237 #define CONFIG_ENV_OFFSET 0x140000 238 #define CONFIG_ENV_OFFSET_REDUND 0x100000 239 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 240 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 241 #endif 242 243 /* 244 * Size of malloc() pool 245 */ 246 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 247 248 #endif 249