1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9263EK board. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * SoC must be defined first, before hardware.h is included. 16 * In this case SoC is defined in boards.cfg. 17 */ 18 #include <asm/hardware.h> 19 20 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH 21 #define CONFIG_SYS_TEXT_BASE 0x21F00000 22 #else 23 #define CONFIG_SYS_TEXT_BASE 0x0000000 24 #endif 25 26 /* ARM asynchronous clock */ 27 #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ 28 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 29 30 #define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */ 31 32 #define CONFIG_ARCH_CPU_INIT 33 34 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 35 #define CONFIG_SETUP_MEMORY_TAGS 1 36 #define CONFIG_INITRD_TAG 1 37 38 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH 39 #define CONFIG_SKIP_LOWLEVEL_INIT 40 #else 41 #define CONFIG_SYS_USE_NORFLASH 42 #endif 43 44 #define CONFIG_BOARD_EARLY_INIT_F 45 46 #define CONFIG_DISPLAY_CPUINFO 47 48 #define CONFIG_CMD_BOOTZ 49 #define CONFIG_OF_LIBFDT 50 51 /* 52 * Hardware drivers 53 */ 54 #define CONFIG_ATMEL_LEGACY 55 #define CONFIG_AT91_GPIO 1 56 #define CONFIG_AT91_GPIO_PULLUP 1 57 58 /* serial console */ 59 #define CONFIG_ATMEL_USART 60 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 61 #define CONFIG_USART_ID ATMEL_ID_SYS 62 #define CONFIG_BAUDRATE 115200 63 64 /* LCD */ 65 #define CONFIG_LCD 1 66 #define LCD_BPP LCD_COLOR8 67 #define CONFIG_LCD_LOGO 1 68 #undef LCD_TEST_PATTERN 69 #define CONFIG_LCD_INFO 1 70 #define CONFIG_LCD_INFO_BELOW_LOGO 1 71 #define CONFIG_SYS_WHITE_ON_BLACK 1 72 #define CONFIG_ATMEL_LCD 1 73 #define CONFIG_ATMEL_LCD_BGR555 1 74 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 75 76 /* LED */ 77 #define CONFIG_AT91_LED 78 #define CONFIG_RED_LED AT91_PIN_PB7 /* the power led */ 79 #define CONFIG_GREEN_LED AT91_PIN_PB8 /* the user1 led */ 80 #define CONFIG_YELLOW_LED AT91_PIN_PC29 /* the user2 led */ 81 82 #define CONFIG_BOOTDELAY 3 83 84 /* 85 * BOOTP options 86 */ 87 #define CONFIG_BOOTP_BOOTFILESIZE 1 88 #define CONFIG_BOOTP_BOOTPATH 1 89 #define CONFIG_BOOTP_GATEWAY 1 90 #define CONFIG_BOOTP_HOSTNAME 1 91 92 /* 93 * Command line configuration. 94 */ 95 #include <config_cmd_default.h> 96 #undef CONFIG_CMD_BDI 97 #undef CONFIG_CMD_FPGA 98 #undef CONFIG_CMD_IMI 99 #undef CONFIG_CMD_IMLS 100 #undef CONFIG_CMD_LOADS 101 #undef CONFIG_CMD_SOURCE 102 103 #define CONFIG_CMD_PING 1 104 #define CONFIG_CMD_DHCP 1 105 #define CONFIG_CMD_NAND 1 106 #define CONFIG_CMD_MMC 107 #define CONFIG_CMD_USB 1 108 109 /* SDRAM */ 110 #define CONFIG_NR_DRAM_BANKS 1 111 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 112 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 113 114 #define CONFIG_SYS_INIT_SP_ADDR \ 115 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 116 117 /* DataFlash */ 118 #define CONFIG_ATMEL_DATAFLASH_SPI 119 #define CONFIG_HAS_DATAFLASH 1 120 #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) 121 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 122 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 123 #define AT91_SPI_CLK 15000000 124 #define DATAFLASH_TCSS (0x1a << 16) 125 #define DATAFLASH_TCHS (0x1 << 24) 126 127 /* MMC */ 128 #ifdef CONFIG_CMD_MMC 129 #define CONFIG_MMC 130 #define CONFIG_GENERIC_MMC 131 #define CONFIG_GENERIC_ATMEL_MCI 132 #endif 133 134 /* FAT */ 135 #ifdef CONFIG_CMD_FAT 136 #define CONFIG_DOS_PARTITION 137 #endif 138 139 /* NOR flash, if populated */ 140 #ifdef CONFIG_SYS_USE_NORFLASH 141 #define CONFIG_SYS_FLASH_CFI 1 142 #define CONFIG_FLASH_CFI_DRIVER 1 143 #define PHYS_FLASH_1 0x10000000 144 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 145 #define CONFIG_SYS_MAX_FLASH_SECT 256 146 #define CONFIG_SYS_MAX_FLASH_BANKS 1 147 148 #define CONFIG_SYS_MONITOR_SEC 1:0-3 149 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 150 #define CONFIG_SYS_MONITOR_LEN (256 << 10) 151 #define CONFIG_ENV_IS_IN_FLASH 1 152 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000) 153 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE) 154 155 /* Address and size of Primary Environment Sector */ 156 #define CONFIG_ENV_SIZE 0x10000 157 158 #define CONFIG_EXTRA_ENV_SETTINGS \ 159 "monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \ 160 "update=" \ 161 "protect off ${monitor_base} +${filesize};" \ 162 "erase ${monitor_base} +${filesize};" \ 163 "cp.b ${fileaddr} ${monitor_base} ${filesize};" \ 164 "protect on ${monitor_base} +${filesize}\0" 165 166 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 167 #define MASTER_PLL_MUL 171 168 #define MASTER_PLL_DIV 14 169 #define MASTER_PLL_OUT 3 170 171 /* clocks */ 172 #define CONFIG_SYS_MOR_VAL \ 173 (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) 174 #define CONFIG_SYS_PLLAR_VAL \ 175 (AT91_PMC_PLLAR_29 | \ 176 AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ 177 AT91_PMC_PLLXR_PLLCOUNT(63) | \ 178 AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ 179 AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) 180 181 /* PCK/2 = MCK Master Clock from PLLA */ 182 #define CONFIG_SYS_MCKR1_VAL \ 183 (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ 184 AT91_PMC_MCKR_MDIV_2) 185 186 /* PCK/2 = MCK Master Clock from PLLA */ 187 #define CONFIG_SYS_MCKR2_VAL \ 188 (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ 189 AT91_PMC_MCKR_MDIV_2) 190 191 /* define PDC[31:16] as DATA[31:16] */ 192 #define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 193 /* no pull-up for D[31:16] */ 194 #define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 195 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ 196 #define CONFIG_SYS_MATRIX_EBICSA_VAL \ 197 (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ 198 AT91_MATRIX_CSA_EBI_CS1A) 199 200 /* SDRAM */ 201 /* SDRAMC_MR Mode register */ 202 #define CONFIG_SYS_SDRC_MR_VAL1 0 203 /* SDRAMC_TR - Refresh Timer register */ 204 #define CONFIG_SYS_SDRC_TR_VAL1 0x13C 205 /* SDRAMC_CR - Configuration register*/ 206 #define CONFIG_SYS_SDRC_CR_VAL \ 207 (AT91_SDRAMC_NC_9 | \ 208 AT91_SDRAMC_NR_13 | \ 209 AT91_SDRAMC_NB_4 | \ 210 AT91_SDRAMC_CAS_3 | \ 211 AT91_SDRAMC_DBW_32 | \ 212 (1 << 8) | /* Write Recovery Delay */ \ 213 (7 << 12) | /* Row Cycle Delay */ \ 214 (2 << 16) | /* Row Precharge Delay */ \ 215 (2 << 20) | /* Row to Column Delay */ \ 216 (5 << 24) | /* Active to Precharge Delay */ \ 217 (1 << 28)) /* Exit Self Refresh to Active Delay */ 218 219 /* Memory Device Register -> SDRAM */ 220 #define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM 221 #define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE 222 #define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ 223 #define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH 224 #define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ 225 #define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ 226 #define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ 227 #define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ 228 #define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ 229 #define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ 230 #define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ 231 #define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ 232 #define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR 233 #define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ 234 #define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL 235 #define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ 236 #define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ 237 #define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ 238 239 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ 240 #define CONFIG_SYS_SMC0_SETUP0_VAL \ 241 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ 242 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) 243 #define CONFIG_SYS_SMC0_PULSE0_VAL \ 244 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ 245 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) 246 #define CONFIG_SYS_SMC0_CYCLE0_VAL \ 247 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) 248 #define CONFIG_SYS_SMC0_MODE0_VAL \ 249 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ 250 AT91_SMC_MODE_DBW_16 | \ 251 AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) 252 253 /* user reset enable */ 254 #define CONFIG_SYS_RSTC_RMR_VAL \ 255 (AT91_RSTC_KEY | \ 256 AT91_RSTC_MR_URSTEN | \ 257 AT91_RSTC_MR_ERSTL(15)) 258 259 /* Disable Watchdog */ 260 #define CONFIG_SYS_WDTC_WDMR_VAL \ 261 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ 262 AT91_WDT_MR_WDV(0xfff) | \ 263 AT91_WDT_MR_WDDIS | \ 264 AT91_WDT_MR_WDD(0xfff)) 265 266 #endif 267 268 #else 269 #define CONFIG_SYS_NO_FLASH 1 270 #endif 271 272 /* NAND flash */ 273 #ifdef CONFIG_CMD_NAND 274 #define CONFIG_NAND_ATMEL 275 #define CONFIG_SYS_MAX_NAND_DEVICE 1 276 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 277 #define CONFIG_SYS_NAND_DBW_8 1 278 /* our ALE is AD21 */ 279 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 280 /* our CLE is AD22 */ 281 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 282 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 283 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 284 #endif 285 286 /* Ethernet */ 287 #define CONFIG_MACB 1 288 #define CONFIG_RMII 1 289 #define CONFIG_NET_RETRY_COUNT 20 290 #define CONFIG_RESET_PHY_R 1 291 #define CONFIG_AT91_WANTS_COMMON_PHY 292 293 /* USB */ 294 #define CONFIG_USB_ATMEL 295 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 296 #define CONFIG_USB_OHCI_NEW 1 297 #define CONFIG_DOS_PARTITION 1 298 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 299 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ 300 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" 301 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 302 #define CONFIG_USB_STORAGE 1 303 #define CONFIG_CMD_FAT 1 304 305 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 306 307 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 308 #define CONFIG_SYS_MEMTEST_END 0x23e00000 309 310 #ifdef CONFIG_SYS_USE_DATAFLASH 311 312 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 313 #define CONFIG_ENV_IS_IN_DATAFLASH 1 314 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 315 #define CONFIG_ENV_OFFSET 0x4200 316 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 317 #define CONFIG_ENV_SIZE 0x4200 318 #define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm" 319 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 320 "root=/dev/mtdblock0 " \ 321 "mtdparts=atmel_nand:-(root) "\ 322 "rw rootfstype=jffs2" 323 324 #elif CONFIG_SYS_USE_NANDFLASH 325 326 /* bootstrap + u-boot + env + linux in nandflash */ 327 #define CONFIG_ENV_IS_IN_NAND 1 328 #define CONFIG_ENV_OFFSET 0xc0000 329 #define CONFIG_ENV_OFFSET_REDUND 0x100000 330 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 331 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 332 #define CONFIG_BOOTARGS \ 333 "console=ttyS0,115200 earlyprintk " \ 334 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 335 "256k(env),256k(env_redundant),256k(spare)," \ 336 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 337 "root=/dev/mtdblock7 rw rootfstype=jffs2" 338 #endif 339 340 #define CONFIG_SYS_PROMPT "U-Boot> " 341 #define CONFIG_SYS_CBSIZE 256 342 #define CONFIG_SYS_MAXARGS 16 343 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 344 #define CONFIG_SYS_LONGHELP 1 345 #define CONFIG_CMDLINE_EDITING 1 346 #define CONFIG_AUTO_COMPLETE 347 #define CONFIG_SYS_HUSH_PARSER 348 349 /* 350 * Size of malloc() pool 351 */ 352 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 353 354 #endif 355