1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards. 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* 31 * SoC must be defined first, before hardware.h is included. 32 * In this case SoC is defined in boards.cfg. 33 */ 34 #include <asm/hardware.h> 35 36 /* 37 * Warning: changing CONFIG_SYS_TEXT_BASE requires 38 * adapting the initial boot program. 39 * Since the linker has to swallow that define, we must use a pure 40 * hex number here! 41 */ 42 #define CONFIG_SYS_TEXT_BASE 0x21f00000 43 44 /* ARM asynchronous clock */ 45 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 46 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ 47 #define CONFIG_SYS_HZ 1000 48 49 /* Define actual evaluation board type from used processor type */ 50 #ifdef CONFIG_AT91SAM9G20 51 # define CONFIG_AT91SAM9G20EK /* It's an Atmel AT91SAM9G20 EK */ 52 #else 53 # define CONFIG_AT91SAM9260EK /* It's an Atmel AT91SAM9260 EK */ 54 #endif 55 56 /* Misc CPU related */ 57 #define CONFIG_ARCH_CPU_INIT 58 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ 59 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 60 #define CONFIG_SETUP_MEMORY_TAGS 61 #define CONFIG_INITRD_TAG 62 #define CONFIG_SKIP_LOWLEVEL_INIT 63 #define CONFIG_BOARD_EARLY_INIT_F 64 #define CONFIG_DISPLAY_CPUINFO 65 66 /* general purpose I/O */ 67 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 68 #define CONFIG_AT91_GPIO 69 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 70 71 /* serial console */ 72 #define CONFIG_ATMEL_USART 73 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 74 #define CONFIG_USART_ID ATMEL_ID_SYS 75 #define CONFIG_BAUDRATE 115200 76 77 /* LED */ 78 #define CONFIG_AT91_LED 79 #define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ 80 #define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ 81 82 #define CONFIG_BOOTDELAY 3 83 84 /* 85 * BOOTP options 86 */ 87 #define CONFIG_BOOTP_BOOTFILESIZE 1 88 #define CONFIG_BOOTP_BOOTPATH 1 89 #define CONFIG_BOOTP_GATEWAY 1 90 #define CONFIG_BOOTP_HOSTNAME 1 91 92 /* 93 * Command line configuration. 94 */ 95 #include <config_cmd_default.h> 96 #undef CONFIG_CMD_BDI 97 #undef CONFIG_CMD_FPGA 98 #undef CONFIG_CMD_IMI 99 #undef CONFIG_CMD_IMLS 100 #undef CONFIG_CMD_LOADS 101 #undef CONFIG_CMD_SOURCE 102 103 #define CONFIG_CMD_PING 1 104 #define CONFIG_CMD_DHCP 1 105 #define CONFIG_CMD_NAND 1 106 #define CONFIG_CMD_USB 1 107 108 /* 109 * SDRAM: 1 bank, min 32, max 128 MB 110 * Initialized before u-boot gets started. 111 */ 112 #define CONFIG_NR_DRAM_BANKS 1 113 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 114 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 115 116 /* 117 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 118 * leaving the correct space for initial global data structure above 119 * that address while providing maximum stack area below. 120 */ 121 #ifdef CONFIG_AT91SAM9XE 122 # define CONFIG_SYS_INIT_SP_ADDR \ 123 (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) 124 #else 125 # define CONFIG_SYS_INIT_SP_ADDR \ 126 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 127 #endif 128 129 /* DataFlash */ 130 #define CONFIG_ATMEL_DATAFLASH_SPI 131 #define CONFIG_HAS_DATAFLASH 1 132 #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) 133 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 134 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 135 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ 136 #define AT91_SPI_CLK 15000000 137 138 #ifdef CONFIG_AT91SAM9G20EK 139 #define DATAFLASH_TCSS (0x22 << 16) 140 #else 141 #define DATAFLASH_TCSS (0x1a << 16) 142 #endif 143 #define DATAFLASH_TCHS (0x1 << 24) 144 145 /* NAND flash */ 146 #ifdef CONFIG_CMD_NAND 147 #define CONFIG_NAND_ATMEL 148 #define CONFIG_SYS_MAX_NAND_DEVICE 1 149 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 150 #define CONFIG_SYS_NAND_DBW_8 151 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 152 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 153 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 154 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 155 #endif 156 157 /* NOR flash - no real flash on this board */ 158 #define CONFIG_SYS_NO_FLASH 1 159 160 /* Ethernet */ 161 #define CONFIG_MACB 1 162 #define CONFIG_RMII 1 163 #define CONFIG_NET_RETRY_COUNT 20 164 #define CONFIG_RESET_PHY_R 1 165 166 /* USB */ 167 #define CONFIG_USB_ATMEL 168 #define CONFIG_USB_OHCI_NEW 1 169 #define CONFIG_DOS_PARTITION 1 170 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 171 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ 172 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 173 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 174 #define CONFIG_USB_STORAGE 1 175 #define CONFIG_CMD_FAT 1 176 177 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 178 179 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 180 #define CONFIG_SYS_MEMTEST_END 0x23e00000 181 182 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 183 184 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 185 #define CONFIG_ENV_IS_IN_DATAFLASH 1 186 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 187 #define CONFIG_ENV_OFFSET 0x4200 188 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 189 #define CONFIG_ENV_SIZE 0x4200 190 #define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm" 191 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 192 "root=/dev/mtdblock0 " \ 193 "mtdparts=atmel_nand:-(root) " \ 194 "rw rootfstype=jffs2" 195 196 #elif CONFIG_SYS_USE_DATAFLASH_CS1 197 198 /* bootstrap + u-boot + env + linux in dataflash on CS1 */ 199 #define CONFIG_ENV_IS_IN_DATAFLASH 1 200 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) 201 #define CONFIG_ENV_OFFSET 0x4200 202 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) 203 #define CONFIG_ENV_SIZE 0x4200 204 #define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm" 205 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 206 "root=/dev/mtdblock0 " \ 207 "mtdparts=atmel_nand:-(root) " \ 208 "rw rootfstype=jffs2" 209 210 #else /* CONFIG_SYS_USE_NANDFLASH */ 211 212 /* bootstrap + u-boot + env + linux in nandflash */ 213 #define CONFIG_ENV_IS_IN_NAND 1 214 #define CONFIG_ENV_OFFSET 0x60000 215 #define CONFIG_ENV_OFFSET_REDUND 0x80000 216 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 217 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 218 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 219 "root=/dev/mtdblock5 " \ 220 "mtdparts=atmel_nand:128k(bootstrap)ro," \ 221 "256k(uboot)ro,128k(env1)ro," \ 222 "128k(env2)ro,2M(linux),-(root) " \ 223 "rw rootfstype=jffs2" 224 225 #endif 226 227 #define CONFIG_SYS_PROMPT "U-Boot> " 228 #define CONFIG_SYS_CBSIZE 256 229 #define CONFIG_SYS_MAXARGS 16 230 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 231 #define CONFIG_SYS_LONGHELP 1 232 #define CONFIG_CMDLINE_EDITING 1 233 #define CONFIG_AUTO_COMPLETE 234 235 /* 236 * Size of malloc() pool 237 */ 238 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 239 240 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ 241 242 #ifdef CONFIG_USE_IRQ 243 #error CONFIG_USE_IRQ not supported 244 #endif 245 246 #endif 247