1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian@popies.net> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards. 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* 31 * SoC must be defined first, before hardware.h is included. 32 * In this case SoC is defined in boards.cfg. 33 */ 34 #include <asm/hardware.h> 35 36 /* 37 * Warning: changing CONFIG_SYS_TEXT_BASE requires 38 * adapting the initial boot program. 39 * Since the linker has to swallow that define, we must use a pure 40 * hex number here! 41 */ 42 #define CONFIG_SYS_TEXT_BASE 0x21f00000 43 44 /* ARM asynchronous clock */ 45 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 46 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ 47 #define CONFIG_SYS_HZ 1000 48 49 /* Define actual evaluation board type from used processor type */ 50 #ifdef CONFIG_AT91SAM9G20 51 # define CONFIG_AT91SAM9G20EK /* It's an Atmel AT91SAM9G20 EK */ 52 #else 53 # define CONFIG_AT91SAM9260EK /* It's an Atmel AT91SAM9260 EK */ 54 #endif 55 56 /* Misc CPU related */ 57 #define CONFIG_ARCH_CPU_INIT 58 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 59 #define CONFIG_SETUP_MEMORY_TAGS 60 #define CONFIG_INITRD_TAG 61 #define CONFIG_SKIP_LOWLEVEL_INIT 62 #define CONFIG_BOARD_EARLY_INIT_F 63 #define CONFIG_DISPLAY_CPUINFO 64 65 #define CONFIG_CMD_BOOTZ 66 #define CONFIG_OF_LIBFDT 67 68 /* general purpose I/O */ 69 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 70 #define CONFIG_AT91_GPIO 71 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 72 73 /* serial console */ 74 #define CONFIG_ATMEL_USART 75 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 76 #define CONFIG_USART_ID ATMEL_ID_SYS 77 #define CONFIG_BAUDRATE 115200 78 79 /* LED */ 80 #define CONFIG_AT91_LED 81 #define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ 82 #define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ 83 84 #define CONFIG_BOOTDELAY 3 85 86 /* 87 * BOOTP options 88 */ 89 #define CONFIG_BOOTP_BOOTFILESIZE 1 90 #define CONFIG_BOOTP_BOOTPATH 1 91 #define CONFIG_BOOTP_GATEWAY 1 92 #define CONFIG_BOOTP_HOSTNAME 1 93 94 /* 95 * Command line configuration. 96 */ 97 #include <config_cmd_default.h> 98 #undef CONFIG_CMD_BDI 99 #undef CONFIG_CMD_FPGA 100 #undef CONFIG_CMD_IMI 101 #undef CONFIG_CMD_IMLS 102 #undef CONFIG_CMD_LOADS 103 #undef CONFIG_CMD_SOURCE 104 105 #define CONFIG_CMD_PING 1 106 #define CONFIG_CMD_DHCP 1 107 #define CONFIG_CMD_NAND 1 108 #define CONFIG_CMD_USB 1 109 110 /* 111 * SDRAM: 1 bank, min 32, max 128 MB 112 * Initialized before u-boot gets started. 113 */ 114 #define CONFIG_NR_DRAM_BANKS 1 115 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 116 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 117 118 /* 119 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 120 * leaving the correct space for initial global data structure above 121 * that address while providing maximum stack area below. 122 */ 123 #ifdef CONFIG_AT91SAM9XE 124 # define CONFIG_SYS_INIT_SP_ADDR \ 125 (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) 126 #else 127 # define CONFIG_SYS_INIT_SP_ADDR \ 128 (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) 129 #endif 130 131 /* DataFlash */ 132 #ifndef CONFIG_AT91SAM9G20EK_2MMC 133 #define CONFIG_ATMEL_DATAFLASH_SPI 134 #define CONFIG_HAS_DATAFLASH 1 135 #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) 136 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 137 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 138 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ 139 #define AT91_SPI_CLK 15000000 140 #endif 141 142 #ifdef CONFIG_AT91SAM9G20EK 143 #define DATAFLASH_TCSS (0x22 << 16) 144 #else 145 #define DATAFLASH_TCSS (0x1a << 16) 146 #endif 147 #define DATAFLASH_TCHS (0x1 << 24) 148 149 /* NAND flash */ 150 #ifdef CONFIG_CMD_NAND 151 #define CONFIG_NAND_ATMEL 152 #define CONFIG_SYS_MAX_NAND_DEVICE 1 153 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 154 #define CONFIG_SYS_NAND_DBW_8 155 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 156 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 157 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 158 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 159 #endif 160 161 /* NOR flash - no real flash on this board */ 162 #define CONFIG_SYS_NO_FLASH 1 163 164 /* Ethernet */ 165 #define CONFIG_MACB 1 166 #define CONFIG_RMII 1 167 #define CONFIG_NET_RETRY_COUNT 20 168 #define CONFIG_RESET_PHY_R 1 169 170 /* USB */ 171 #define CONFIG_USB_ATMEL 172 #define CONFIG_USB_OHCI_NEW 1 173 #define CONFIG_DOS_PARTITION 1 174 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 175 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ 176 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 177 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 178 #define CONFIG_USB_STORAGE 1 179 #define CONFIG_CMD_FAT 1 180 181 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 182 183 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 184 #define CONFIG_SYS_MEMTEST_END 0x23e00000 185 186 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 187 188 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 189 #define CONFIG_ENV_IS_IN_DATAFLASH 1 190 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 191 #define CONFIG_ENV_OFFSET 0x4200 192 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 193 #define CONFIG_ENV_SIZE 0x4200 194 #define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm" 195 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 196 "root=/dev/mtdblock0 " \ 197 "mtdparts=atmel_nand:-(root) " \ 198 "rw rootfstype=jffs2" 199 200 #elif CONFIG_SYS_USE_DATAFLASH_CS1 201 202 /* bootstrap + u-boot + env + linux in dataflash on CS1 */ 203 #define CONFIG_ENV_IS_IN_DATAFLASH 1 204 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) 205 #define CONFIG_ENV_OFFSET 0x4200 206 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) 207 #define CONFIG_ENV_SIZE 0x4200 208 #define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm" 209 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 210 "root=/dev/mtdblock0 " \ 211 "mtdparts=atmel_nand:-(root) " \ 212 "rw rootfstype=jffs2" 213 214 #else /* CONFIG_SYS_USE_NANDFLASH */ 215 216 /* bootstrap + u-boot + env + linux in nandflash */ 217 #define CONFIG_ENV_IS_IN_NAND 1 218 #define CONFIG_ENV_OFFSET 0xc0000 219 #define CONFIG_ENV_OFFSET_REDUND 0x100000 220 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 221 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" 222 #define CONFIG_BOOTARGS \ 223 "console=ttyS0,115200 earlyprintk " \ 224 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 225 "256k(env),256k(env_redundant),256k(spare)," \ 226 "512k(dtb),6M(kernel)ro,-(rootfs) " \ 227 "root=/dev/mtdblock7 rw rootfstype=jffs2" 228 229 #endif 230 231 #define CONFIG_SYS_PROMPT "U-Boot> " 232 #define CONFIG_SYS_CBSIZE 256 233 #define CONFIG_SYS_MAXARGS 16 234 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 235 #define CONFIG_SYS_LONGHELP 1 236 #define CONFIG_CMDLINE_EDITING 1 237 #define CONFIG_AUTO_COMPLETE 238 239 /* 240 * Size of malloc() pool 241 */ 242 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 243 244 #endif 245