1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * 6 * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards. 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* ARM asynchronous clock */ 31 #define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ 32 #define CONFIG_SYS_HZ 1000 33 34 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ 35 36 #ifdef CONFIG_AT91SAM9G20EK 37 #define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ 38 #else 39 #define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/ 40 #endif 41 42 #define CONFIG_ARCH_CPU_INIT 43 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ 44 45 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 46 #define CONFIG_SETUP_MEMORY_TAGS 1 47 #define CONFIG_INITRD_TAG 1 48 49 #define CONFIG_SKIP_LOWLEVEL_INIT 50 #define CONFIG_SKIP_RELOCATE_UBOOT 51 52 /* 53 * Hardware drivers 54 */ 55 #define CONFIG_ATMEL_USART 1 56 #undef CONFIG_USART0 57 #undef CONFIG_USART1 58 #undef CONFIG_USART2 59 #define CONFIG_USART3 1 /* USART 3 is DBGU */ 60 61 /* LED */ 62 #define CONFIG_AT91_LED 63 #define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ 64 #define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ 65 66 #define CONFIG_BOOTDELAY 3 67 68 /* 69 * BOOTP options 70 */ 71 #define CONFIG_BOOTP_BOOTFILESIZE 1 72 #define CONFIG_BOOTP_BOOTPATH 1 73 #define CONFIG_BOOTP_GATEWAY 1 74 #define CONFIG_BOOTP_HOSTNAME 1 75 76 /* 77 * Command line configuration. 78 */ 79 #include <config_cmd_default.h> 80 #undef CONFIG_CMD_BDI 81 #undef CONFIG_CMD_FPGA 82 #undef CONFIG_CMD_IMI 83 #undef CONFIG_CMD_IMLS 84 #undef CONFIG_CMD_LOADS 85 #undef CONFIG_CMD_SOURCE 86 87 #define CONFIG_CMD_PING 1 88 #define CONFIG_CMD_DHCP 1 89 #define CONFIG_CMD_NAND 1 90 #define CONFIG_CMD_USB 1 91 92 /* SDRAM */ 93 #define CONFIG_NR_DRAM_BANKS 1 94 #define PHYS_SDRAM 0x20000000 95 #define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ 96 97 /* DataFlash */ 98 #define CONFIG_ATMEL_DATAFLASH_SPI 99 #define CONFIG_HAS_DATAFLASH 1 100 #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) 101 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 102 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ 103 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ 104 #define AT91_SPI_CLK 15000000 105 106 #ifdef CONFIG_AT91SAM9G20EK 107 #define DATAFLASH_TCSS (0x22 << 16) 108 #else 109 #define DATAFLASH_TCSS (0x1a << 16) 110 #endif 111 #define DATAFLASH_TCHS (0x1 << 24) 112 113 /* NAND flash */ 114 #ifdef CONFIG_CMD_NAND 115 #define CONFIG_NAND_ATMEL 116 #define CONFIG_SYS_MAX_NAND_DEVICE 1 117 #define CONFIG_SYS_NAND_BASE 0x40000000 118 #define CONFIG_SYS_NAND_DBW_8 1 119 /* our ALE is AD21 */ 120 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 121 /* our CLE is AD22 */ 122 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 123 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 124 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 125 #endif 126 127 /* NOR flash - no real flash on this board */ 128 #define CONFIG_SYS_NO_FLASH 1 129 130 /* Ethernet */ 131 #define CONFIG_MACB 1 132 #define CONFIG_RMII 1 133 #define CONFIG_NET_MULTI 1 134 #define CONFIG_NET_RETRY_COUNT 20 135 #define CONFIG_RESET_PHY_R 1 136 137 /* USB */ 138 #define CONFIG_USB_ATMEL 139 #define CONFIG_USB_OHCI_NEW 1 140 #define CONFIG_DOS_PARTITION 1 141 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 142 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ 143 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" 144 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 145 #define CONFIG_USB_STORAGE 1 146 #define CONFIG_CMD_FAT 1 147 148 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 149 150 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM 151 #define CONFIG_SYS_MEMTEST_END 0x23e00000 152 153 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 154 155 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 156 #define CONFIG_ENV_IS_IN_DATAFLASH 1 157 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) 158 #define CONFIG_ENV_OFFSET 0x4200 159 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) 160 #define CONFIG_ENV_SIZE 0x4200 161 #define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" 162 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 163 "root=/dev/mtdblock0 " \ 164 "mtdparts=at91_nand:-(root) " \ 165 "rw rootfstype=jffs2" 166 167 #elif CONFIG_SYS_USE_DATAFLASH_CS1 168 169 /* bootstrap + u-boot + env + linux in dataflash on CS1 */ 170 #define CONFIG_ENV_IS_IN_DATAFLASH 1 171 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) 172 #define CONFIG_ENV_OFFSET 0x4200 173 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) 174 #define CONFIG_ENV_SIZE 0x4200 175 #define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" 176 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 177 "root=/dev/mtdblock0 " \ 178 "mtdparts=at91_nand:-(root) " \ 179 "rw rootfstype=jffs2" 180 181 #else /* CONFIG_SYS_USE_NANDFLASH */ 182 183 /* bootstrap + u-boot + env + linux in nandflash */ 184 #define CONFIG_ENV_IS_IN_NAND 1 185 #define CONFIG_ENV_OFFSET 0x60000 186 #define CONFIG_ENV_OFFSET_REDUND 0x80000 187 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 188 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" 189 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 190 "root=/dev/mtdblock5 " \ 191 "mtdparts=at91_nand:128k(bootstrap)ro," \ 192 "256k(uboot)ro,128k(env1)ro," \ 193 "128k(env2)ro,2M(linux),-(root) " \ 194 "rw rootfstype=jffs2" 195 196 #endif 197 198 #define CONFIG_BAUDRATE 115200 199 #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } 200 201 #define CONFIG_SYS_PROMPT "U-Boot> " 202 #define CONFIG_SYS_CBSIZE 256 203 #define CONFIG_SYS_MAXARGS 16 204 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 205 #define CONFIG_SYS_LONGHELP 1 206 #define CONFIG_CMDLINE_EDITING 1 207 208 #define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) 209 /* 210 * Size of malloc() pool 211 */ 212 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) 213 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ 214 215 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ 216 217 #ifdef CONFIG_USE_IRQ 218 #error CONFIG_USE_IRQ not supported 219 #endif 220 221 #endif 222