1 /*
2  * Common part of configuration settings for the AT91 SAMA5 board.
3  *
4  * Copyright (C) 2015 Atmel Corporation
5  *		      Josh Wu <josh.wu@atmel.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __AT91_SAMA5_COMMON_H
11 #define __AT91_SAMA5_COMMON_H
12 
13 /* ARM asynchronous clock */
14 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
15 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
16 
17 #define CONFIG_ARCH_CPU_INIT
18 
19 #ifndef CONFIG_SPL_BUILD
20 #define CONFIG_SKIP_LOWLEVEL_INIT
21 #endif
22 
23 /* general purpose I/O */
24 #ifndef CONFIG_DM_GPIO
25 #define CONFIG_AT91_GPIO
26 #endif
27 
28 
29 /*
30  * BOOTP options
31  */
32 #define CONFIG_BOOTP_BOOTFILESIZE
33 
34 /*
35  * Command line configuration.
36  */
37 
38 #ifdef CONFIG_SD_BOOT
39 
40 #ifdef CONFIG_ENV_IS_IN_MMC
41 /* Use raw reserved sectors to save environment */
42 #define CONFIG_ENV_OFFSET		0x2000
43 #define CONFIG_ENV_SIZE			0x1000
44 #define CONFIG_SYS_MMC_ENV_DEV		0
45 #else
46 /* u-boot env in sd/mmc card */
47 #define CONFIG_ENV_SIZE		0x4000
48 #endif
49 
50 #define CONFIG_BOOTCOMMAND	"if test ! -n ${dtb_name}; then "	\
51 				    "setenv dtb_name at91-${board_name}.dtb; " \
52 				"fi; "					\
53 				"fatload mmc 0:1 0x21000000 ${dtb_name}; " \
54 				"fatload mmc 0:1 0x22000000 zImage; "	\
55 				"bootz 0x22000000 - 0x21000000"
56 
57 #else
58 
59 #ifdef CONFIG_NAND_BOOT
60 /* u-boot env in nand flash */
61 #define CONFIG_ENV_OFFSET		0xc0000
62 #define CONFIG_ENV_OFFSET_REDUND	0x100000
63 #define CONFIG_ENV_SIZE			0x20000
64 #define CONFIG_BOOTCOMMAND		"nand read 0x21000000 0x180000 0x80000;"	\
65 					"nand read 0x22000000 0x200000 0x600000;"	\
66 					"bootz 0x22000000 - 0x21000000"
67 #elif CONFIG_SPI_BOOT
68 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
69 #define CONFIG_ENV_OFFSET		0x6000
70 #define CONFIG_ENV_SIZE			0x2000
71 #define CONFIG_ENV_SECT_SIZE		0x1000
72 #define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
73 					"sf read 0x21000000 0x60000 0xc000; "	\
74 					"sf read 0x22000000 0x6c000 0x394000; "	\
75 					"bootz 0x22000000 - 0x21000000"
76 #endif
77 
78 #endif
79 
80 /* Size of malloc() pool */
81 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
82 
83 #endif
84