1 /*
2  * Common part of configuration settings for the AT91 SAMA5 board.
3  *
4  * Copyright (C) 2015 Atmel Corporation
5  *		      Josh Wu <josh.wu@atmel.com>
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __AT91_SAMA5_COMMON_H
11 #define __AT91_SAMA5_COMMON_H
12 
13 #include <asm/hardware.h>
14 
15 #define CONFIG_SYS_TEXT_BASE		0x26f00000
16 
17 /* ARM asynchronous clock */
18 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
19 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
20 
21 #define CONFIG_ARCH_CPU_INIT
22 
23 #ifndef CONFIG_SPL_BUILD
24 #define CONFIG_SKIP_LOWLEVEL_INIT
25 #endif
26 
27 #define CONFIG_BOARD_EARLY_INIT_F
28 
29 #define CONFIG_ENV_VARS_UBOOT_CONFIG
30 
31 /* general purpose I/O */
32 #define CONFIG_AT91_GPIO
33 
34 
35 /*
36  * BOOTP options
37  */
38 #define CONFIG_BOOTP_BOOTFILESIZE
39 #define CONFIG_BOOTP_BOOTPATH
40 #define CONFIG_BOOTP_GATEWAY
41 #define CONFIG_BOOTP_HOSTNAME
42 
43 /*
44  * Command line configuration.
45  */
46 
47 #ifdef CONFIG_SYS_USE_MMC
48 
49 #ifdef CONFIG_ENV_IS_IN_MMC
50 /* Use raw reserved sectors to save environment */
51 #define CONFIG_ENV_OFFSET		0x2000
52 #define CONFIG_ENV_SIZE			0x1000
53 #define CONFIG_SYS_MMC_ENV_DEV		0
54 #else
55 /* u-boot env in sd/mmc card */
56 #define CONFIG_ENV_IS_IN_FAT
57 #define CONFIG_FAT_WRITE
58 #define FAT_ENV_INTERFACE	"mmc"
59 #define FAT_ENV_DEVICE_AND_PART	"0"
60 #define FAT_ENV_FILE		"uboot.env"
61 #define CONFIG_ENV_SIZE		0x4000
62 #endif
63 
64 #define CONFIG_BOOTCOMMAND	"if test ! -n ${dtb_name}; then "	\
65 				    "setenv dtb_name at91-${board_name}.dtb; " \
66 				"fi; "					\
67 				"fatload mmc 0:1 0x21000000 ${dtb_name}; " \
68 				"fatload mmc 0:1 0x22000000 zImage; "	\
69 				"bootz 0x22000000 - 0x21000000"
70 #define CONFIG_BOOTARGS							\
71 	"console=ttyS0,115200 earlyprintk "				\
72 	"root=/dev/mmcblk0p2 rw rootwait"
73 #else
74 #define CONFIG_BOOTARGS							\
75 	"console=ttyS0,115200 earlyprintk "				\
76 	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
77 	"256K(env),256k(env_redundant),256k(spare),"			\
78 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
79 	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
80 
81 #ifdef CONFIG_SYS_USE_NANDFLASH
82 /* u-boot env in nand flash */
83 #define CONFIG_ENV_IS_IN_NAND
84 #define CONFIG_ENV_OFFSET		0xc0000
85 #define CONFIG_ENV_OFFSET_REDUND	0x100000
86 #define CONFIG_ENV_SIZE			0x20000
87 #define CONFIG_BOOTCOMMAND		"nand read 0x21000000 0x180000 0x80000;"	\
88 					"nand read 0x22000000 0x200000 0x600000;"	\
89 					"bootz 0x22000000 - 0x21000000"
90 #elif CONFIG_SYS_USE_SERIALFLASH
91 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
92 #define CONFIG_ENV_IS_IN_SPI_FLASH
93 #define CONFIG_ENV_OFFSET		0x6000
94 #define CONFIG_ENV_SIZE			0x2000
95 #define CONFIG_ENV_SECT_SIZE		0x1000
96 #define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
97 					"sf read 0x21000000 0x60000 0xc000; "	\
98 					"sf read 0x22000000 0x6c000 0x394000; "	\
99 					"bootz 0x22000000 - 0x21000000"
100 #endif
101 
102 #endif
103 
104 #define CONFIG_BAUDRATE			115200
105 
106 #define CONFIG_SYS_CBSIZE		256
107 #define CONFIG_SYS_MAXARGS		16
108 #define CONFIG_SYS_LONGHELP
109 #define CONFIG_CMDLINE_EDITING
110 #define CONFIG_AUTO_COMPLETE
111 
112 /* Size of malloc() pool */
113 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
114 
115 #endif
116