1 /* 2 * Copyright (C) 2013 Samsung Electronics 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * Configuration settings for the SAMSUNG Arndale board. 7 */ 8 9 #ifndef __CONFIG_ARNDALE_H 10 #define __CONFIG_ARNDALE_H 11 12 /* High Level Configuration Options */ 13 #define CONFIG_SAMSUNG /* in a SAMSUNG core */ 14 #define CONFIG_S5P /* S5P Family */ 15 #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ 16 #define CONFIG_EXYNOS5250 17 18 #include <asm/arch/cpu.h> /* get chip and board defs */ 19 20 #define CONFIG_SYS_GENERIC_BOARD 21 #define CONFIG_ARCH_CPU_INIT 22 #define CONFIG_DISPLAY_CPUINFO 23 #define CONFIG_DISPLAY_BOARDINFO 24 25 /* Enable fdt support for Exynos5250 */ 26 #define CONFIG_ARCH_DEVICE_TREE exynos5250 27 #define CONFIG_OF_CONTROL 28 #define CONFIG_OF_SEPARATE 29 30 /* Allow tracing to be enabled */ 31 #define CONFIG_TRACE 32 #define CONFIG_CMD_TRACE 33 #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) 34 #define CONFIG_TRACE_EARLY_SIZE (8 << 20) 35 #define CONFIG_TRACE_EARLY 36 #define CONFIG_TRACE_EARLY_ADDR 0x50000000 37 38 /* Keep L2 Cache Disabled */ 39 #define CONFIG_SYS_DCACHE_OFF 40 41 #define CONFIG_SYS_SDRAM_BASE 0x40000000 42 #define CONFIG_SYS_TEXT_BASE 0x43E00000 43 44 /* input clock of PLL: SMDK5250 has 24MHz input clock */ 45 #define CONFIG_SYS_CLK_FREQ 24000000 46 47 #define CONFIG_SETUP_MEMORY_TAGS 48 #define CONFIG_CMDLINE_TAG 49 #define CONFIG_INITRD_TAG 50 #define CONFIG_CMDLINE_EDITING 51 52 /* Power Down Modes */ 53 #define S5P_CHECK_SLEEP 0x00000BAD 54 #define S5P_CHECK_DIDLE 0xBAD00000 55 #define S5P_CHECK_LPA 0xABAD0000 56 57 /* Offset for inform registers */ 58 #define INFORM0_OFFSET 0x800 59 #define INFORM1_OFFSET 0x804 60 61 /* Size of malloc() pool */ 62 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) 63 64 /* select serial console configuration */ 65 #define CONFIG_BAUDRATE 115200 66 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 67 #define CONFIG_SILENT_CONSOLE 68 69 /* Console configuration */ 70 #define CONFIG_CONSOLE_MUX 71 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 72 #define EXYNOS_DEVICE_SETTINGS \ 73 "stdin=serial\0" \ 74 "stdout=serial\0" \ 75 "stderr=serial\0" 76 77 #define CONFIG_EXTRA_ENV_SETTINGS \ 78 EXYNOS_DEVICE_SETTINGS 79 80 /* SD/MMC configuration */ 81 #define CONFIG_GENERIC_MMC 82 #define CONFIG_MMC 83 #define CONFIG_SDHCI 84 #define CONFIG_S5P_SDHCI 85 #define CONFIG_DWMMC 86 #define CONFIG_EXYNOS_DWMMC 87 #define CONFIG_SUPPORT_EMMC_BOOT 88 #define CONFIG_BOUNCE_BUFFER 89 90 91 #define CONFIG_BOARD_EARLY_INIT_F 92 #define CONFIG_SKIP_LOWLEVEL_INIT 93 94 /* PWM */ 95 #define CONFIG_PWM 96 97 /* allow to overwrite serial and ethaddr */ 98 #define CONFIG_ENV_OVERWRITE 99 100 /* Command definition*/ 101 #include <config_cmd_default.h> 102 103 #define CONFIG_CMD_PING 104 #define CONFIG_CMD_ELF 105 #define CONFIG_CMD_MMC 106 #define CONFIG_CMD_EXT2 107 #define CONFIG_CMD_FAT 108 #define CONFIG_CMD_NET 109 #define CONFIG_CMD_HASH 110 111 #define CONFIG_BOOTDELAY 3 112 #define CONFIG_ZERO_BOOTDELAY_CHECK 113 114 /* USB */ 115 #define CONFIG_CMD_USB 116 #define CONFIG_USB_EHCI 117 #define CONFIG_USB_EHCI_EXYNOS 118 #define CONFIG_USB_STORAGE 119 120 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 121 #define CONFIG_USB_HOST_ETHER 122 #define CONFIG_USB_ETHER_ASIX 123 124 /* MMC SPL */ 125 #define CONFIG_EXYNOS_SPL 126 #define CONFIG_SPL 127 #define COPY_BL2_FNPTR_ADDR 0x02020030 128 129 #define CONFIG_SPL_LIBCOMMON_SUPPORT 130 131 /* specific .lds file */ 132 #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" 133 #define CONFIG_SPL_TEXT_BASE 0x02023400 134 #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) 135 136 #define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" 137 138 /* Miscellaneous configurable options */ 139 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 140 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 141 #define CONFIG_SYS_PROMPT "ARNDALE # " 142 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 143 #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ 144 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 145 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" 146 /* Boot Argument Buffer Size */ 147 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 148 /* memtest works on */ 149 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 150 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) 151 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) 152 153 #define CONFIG_RD_LVL 154 155 #define CONFIG_NR_DRAM_BANKS 8 156 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ 157 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE 158 #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE 159 #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) 160 #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE 161 #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) 162 #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE 163 #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) 164 #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE 165 #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) 166 #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE 167 #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) 168 #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE 169 #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) 170 #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE 171 #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) 172 #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE 173 174 #define CONFIG_SYS_MONITOR_BASE 0x00000000 175 176 /* FLASH and environment organization */ 177 #define CONFIG_SYS_NO_FLASH 178 #undef CONFIG_CMD_IMLS 179 #define CONFIG_IDENT_STRING " for ARNDALE" 180 181 #define CONFIG_SYS_MMC_ENV_DEV 0 182 183 #define CONFIG_ENV_IS_IN_MMC 184 #define CONFIG_SECURE_BL1_ONLY 185 186 /* Secure FW size configuration */ 187 #ifdef CONFIG_SECURE_BL1_ONLY 188 #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ 189 #else 190 #define CONFIG_SEC_FW_SIZE 0 191 #endif 192 193 /* Configuration of BL1, BL2, ENV Blocks on mmc */ 194 #define CONFIG_RES_BLOCK_SIZE (512) 195 #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ 196 #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ 197 #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ 198 199 #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) 200 #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) 201 #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) 202 203 /* U-boot copy size from boot Media to DRAM.*/ 204 #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) 205 #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) 206 207 #define CONFIG_DOS_PARTITION 208 #define CONFIG_EFI_PARTITION 209 #define CONFIG_CMD_PART 210 #define CONFIG_PARTITION_UUIDS 211 212 213 #define CONFIG_IRAM_STACK 0x02050000 214 215 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK 216 217 /* I2C */ 218 #define CONFIG_SYS_I2C_INIT_BOARD 219 #define CONFIG_SYS_I2C 220 #define CONFIG_CMD_I2C 221 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ 222 #define CONFIG_SYS_I2C_S3C24X0 223 #define CONFIG_MAX_I2C_NUM 8 224 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 225 #define CONFIG_I2C_EDID 226 227 /* PMIC */ 228 #define CONFIG_PMIC 229 #define CONFIG_PMIC_I2C 230 #define CONFIG_PMIC_MAX77686 231 232 #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale 233 234 /* Ethernet Controllor Driver */ 235 #ifdef CONFIG_CMD_NET 236 #define CONFIG_SMC911X 237 #define CONFIG_SMC911X_BASE 0x5000000 238 #define CONFIG_SMC911X_16_BIT 239 #define CONFIG_ENV_SROM_BANK 1 240 #endif /*CONFIG_CMD_NET*/ 241 242 /* Enable PXE Support */ 243 #ifdef CONFIG_CMD_NET 244 #define CONFIG_CMD_PXE 245 #define CONFIG_MENU 246 #endif 247 248 /* Enable devicetree support */ 249 #define CONFIG_OF_LIBFDT 250 251 /* Enable Time Command */ 252 #define CONFIG_CMD_TIME 253 254 #endif /* __CONFIG_H */ 255