1 /* 2 * (C) Copyright 2015 3 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 4 * 5 * Based on: 6 * Copyright (C) 2012 Freescale Semiconductor, Inc. 7 * 8 * Configuration settings for the Freescale i.MX6DL aristainetos2 board. 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 #ifndef __ARISTAINETOS2B_CONFIG_H 13 #define __ARISTAINETOS2B_CONFIG_H 14 15 #define CONFIG_SYS_BOARD_VERSION 3 16 #define CONFIG_HOSTNAME aristainetos2 17 #define CONFIG_BOARDNAME "aristainetos2-revB" 18 19 #define CONFIG_BOARD_LATE_INIT 20 21 #define CONFIG_MXC_UART_BASE UART2_BASE 22 #define CONFIG_CONSOLE_DEV "ttymxc1" 23 24 #define CONFIG_FEC_XCV_TYPE RGMII 25 #define CONFIG_PHY_MICREL_KSZ9031 26 27 #define CONFIG_SF_DEFAULT_BUS 0 28 #define CONFIG_SF_DEFAULT_CS 0 29 30 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ 31 "board_type=aristainetos2_7@1\0" \ 32 "nor_bootdelay=-2\0" \ 33 "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ 34 "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ 35 "-(rescue-system);gpmi-nand:-(ubi)\0" \ 36 "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \ 37 "ubiargs=setenv bootargs console=${console},${baudrate} " \ 38 "ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \ 39 "ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \ 40 "ubifsload ${fit_addr_r} /boot/system.itb; " \ 41 "imi ${fit_addr_r}\0 " \ 42 43 #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ 44 45 #define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15) 46 #define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(1, 0) 47 #define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15) 48 49 /* Framebuffer */ 50 #define CONFIG_SYS_LDB_CLOCK 33246000 51 #define CONFIG_LG4573 52 #define CONFIG_LG4573_BUS 0 53 #define CONFIG_LG4573_CS 1 54 55 #define CONFIG_CMD_BMP 56 57 #define CONFIG_PWM_IMX 58 #define CONFIG_IMX6_PWM_PER_CLK 66000000 59 60 #include "aristainetos-common.h" 61 62 #endif /* __ARISTAINETOS2B_CONFIG_H */ 63