1 /* 2 * (C) Copyright 2015 3 * (C) Copyright 2014 4 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * Copyright (C) 2012 Freescale Semiconductor, Inc. 8 * 9 * Configuration settings for the Freescale i.MX6Q SabreSD board. 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 #ifndef __ARISTAINETOS_CONFIG_H 14 #define __ARISTAINETOS_CONFIG_H 15 16 #define CONFIG_SYS_BOARD_VERSION 1 17 #define CONFIG_HOSTNAME aristainetos 18 #define CONFIG_BOARDNAME "aristainetos" 19 20 #define CONFIG_MXC_UART_BASE UART5_BASE 21 #define CONFIG_CONSOLE_DEV "ttymxc4" 22 23 #define CONFIG_FEC_XCV_TYPE RMII 24 25 #define CONFIG_SF_DEFAULT_BUS 3 26 #define CONFIG_SF_DEFAULT_CS 0 27 28 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ 29 "board_type=aristainetos7@1\0" \ 30 "mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \ 31 "mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \ 32 "-(rescue-system);gpmi-nand:-(ubi)\0" \ 33 "addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \ 34 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 35 "ubiargs=setenv bootargs console=${console},${baudrate} " \ 36 "ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \ 37 "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \ 38 "ubifsload ${fit_addr_r} /boot/system.itb; " \ 39 "imi ${fit_addr_r}\0 " 40 41 #define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15) 42 #define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31) 43 #define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15) 44 45 #include "aristainetos-common.h" 46 47 #endif /* __ARISTAINETOS_CONFIG_H */ 48