1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2015 4 * (C) Copyright 2014 5 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 6 * 7 * Based on: 8 * Copyright (C) 2012 Freescale Semiconductor, Inc. 9 * 10 * Configuration settings for the Freescale i.MX6Q SabreSD board. 11 */ 12 #ifndef __ARISTAINETOS_CONFIG_H 13 #define __ARISTAINETOS_CONFIG_H 14 15 #define CONFIG_SYS_BOARD_VERSION 1 16 #define CONFIG_HOSTNAME "aristainetos" 17 #define CONFIG_BOARDNAME "aristainetos" 18 19 #define CONFIG_MXC_UART_BASE UART5_BASE 20 #define CONSOLE_DEV "ttymxc4" 21 22 #define CONFIG_FEC_XCV_TYPE RMII 23 24 #define CONFIG_SF_DEFAULT_BUS 3 25 #define CONFIG_SF_DEFAULT_CS 0 26 27 #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ 28 "board_type=aristainetos7@1\0" \ 29 "mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \ 30 "mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \ 31 "-(rescue-system);gpmi-nand:-(ubi)\0" \ 32 "addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \ 33 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 34 "ubiargs=setenv bootargs console=${console},${baudrate} " \ 35 "ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \ 36 "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \ 37 "ubifsload ${fit_addr_r} /boot/system.itb; " \ 38 "imi ${fit_addr_r}\0 " 39 40 #define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15) 41 #define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31) 42 #define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15) 43 44 #include "aristainetos-common.h" 45 46 #endif /* __ARISTAINETOS_CONFIG_H */ 47