1 /* 2 * Copyright (C) 2012 Bluegiga Technologies Oy 3 * 4 * Authors: 5 * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> 6 * Lauri Hintsala <lauri.hintsala@bluegiga.com> 7 * 8 * Based on m28evk.h: 9 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> 10 * on behalf of DENX Software Engineering GmbH 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 */ 22 #ifndef __CONFIG_H 23 #define __CONFIG_H 24 25 /* SoC configurations */ 26 #define CONFIG_MX28 /* i.MX28 SoC */ 27 #define CONFIG_MXS_GPIO /* GPIO control */ 28 #define CONFIG_SYS_HZ 1000 /* Ticks per second */ 29 30 #define MACH_TYPE_APX4DEVKIT 3712 31 #define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT 32 33 #include <asm/arch/regs-base.h> 34 35 #define CONFIG_SYS_NO_FLASH 36 #define CONFIG_BOARD_EARLY_INIT_F 37 #define CONFIG_ARCH_CPU_INIT 38 #define CONFIG_ARCH_MISC_INIT 39 40 /* SPL */ 41 #define CONFIG_SPL 42 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE 43 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" 44 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" 45 #define CONFIG_SPL_LIBCOMMON_SUPPORT 46 #define CONFIG_SPL_LIBGENERIC_SUPPORT 47 #define CONFIG_SPL_GPIO_SUPPORT 48 49 /* U-Boot Commands */ 50 #include <config_cmd_default.h> 51 #define CONFIG_DISPLAY_CPUINFO 52 #define CONFIG_DOS_PARTITION 53 54 #define CONFIG_CMD_CACHE 55 #define CONFIG_CMD_DATE 56 #define CONFIG_CMD_DHCP 57 #define CONFIG_CMD_EXT2 58 #define CONFIG_CMD_FAT 59 #define CONFIG_CMD_I2C 60 #define CONFIG_CMD_MII 61 #define CONFIG_CMD_MMC 62 #define CONFIG_CMD_NAND 63 #define CONFIG_CMD_NET 64 #define CONFIG_CMD_NFS 65 #define CONFIG_CMD_PING 66 #define CONFIG_CMD_SAVEENV 67 #define CONFIG_CMD_USB 68 69 /* Memory configurations */ 70 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ 71 #define PHYS_SDRAM_1 0x40000000 /* Base address */ 72 #define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ 73 #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ 74 #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ 75 #define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ 76 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 77 78 /* Point initial SP in SRAM so SPL can use it too. */ 79 #define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 80 #define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) 81 82 #define CONFIG_SYS_INIT_SP_OFFSET \ 83 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 84 #define CONFIG_SYS_INIT_SP_ADDR \ 85 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 86 87 /* 88 * We need to sacrifice first 4 bytes of RAM here to avoid triggering some 89 * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot 90 * binary. In case there was more of this mess, 0x100 bytes are skipped. 91 */ 92 #define CONFIG_SYS_TEXT_BASE 0x40000100 93 94 #define CONFIG_ENV_OVERWRITE 95 96 /* U-Boot general configurations */ 97 #define CONFIG_SYS_LONGHELP 98 #define CONFIG_SYS_PROMPT "=> " 99 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ 100 #define CONFIG_SYS_PBSIZE \ 101 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 102 /* Print buffer size */ 103 #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ 104 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 105 /* Boot argument buffer size */ 106 #define CONFIG_VERSION_VARIABLE /* U-Boot version */ 107 #define CONFIG_AUTO_COMPLETE /* Command auto complete */ 108 #define CONFIG_CMDLINE_EDITING /* Command history etc. */ 109 #define CONFIG_SYS_HUSH_PARSER 110 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 111 #define CONFIG_OF_LIBFDT 112 #define CONFIG_ENV_IS_IN_NAND 113 114 /* Serial Driver */ 115 #define CONFIG_PL011_SERIAL 116 #define CONFIG_PL011_CLOCK 24000000 117 #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } 118 #define CONFIG_CONS_INDEX 0 119 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 120 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 121 122 /* DMA */ 123 #define CONFIG_APBH_DMA 124 125 /* MMC Driver */ 126 #ifdef CONFIG_ENV_IS_IN_MMC 127 #define CONFIG_ENV_OFFSET (256 * 1024) 128 #define CONFIG_ENV_SIZE (16 * 1024) 129 #define CONFIG_SYS_MMC_ENV_DEV 0 130 #endif 131 132 #ifdef CONFIG_CMD_MMC 133 #define CONFIG_MMC 134 #define CONFIG_GENERIC_MMC 135 #define CONFIG_BOUNCE_BUFFER 136 #define CONFIG_MXS_MMC 137 #endif 138 139 /* NAND Driver */ 140 #ifdef CONFIG_ENV_IS_IN_NAND 141 #define CONFIG_ENV_SECT_SIZE (128 * 1024) 142 #define CONFIG_ENV_SIZE (128 * 1024) 143 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 144 #define CONFIG_ENV_RANGE (384 * 1024) 145 #define CONFIG_ENV_OFFSET 0x120000 146 #define CONFIG_ENV_OFFSET_REDUND \ 147 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) 148 #endif 149 150 #ifdef CONFIG_CMD_NAND 151 #define CONFIG_NAND_MXS 152 #define CONFIG_SYS_MAX_NAND_DEVICE 1 153 #define CONFIG_SYS_NAND_BASE 0x60000000 154 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 155 156 #define CONFIG_CMD_UBI 157 #define CONFIG_CMD_UBIFS 158 #define CONFIG_CMD_MTDPARTS 159 #define CONFIG_RBTREE 160 #define CONFIG_LZO 161 #define CONFIG_MTD_DEVICE 162 #define CONFIG_MTD_PARTITIONS 163 #define MTDIDS_DEFAULT "nand0=gpmi-nand" 164 #define MTDPARTS_DEFAULT \ 165 "mtdparts=gpmi-nand:128k(bootstrap),1024k(boot),768k(env),-(root)" 166 #else 167 #define MTDPARTS_DEFAULT "" 168 #endif 169 170 /* Ethernet on SOC (FEC) */ 171 #ifdef CONFIG_CMD_NET 172 #define CONFIG_NET_MULTI 173 #define CONFIG_ETHPRIME "FEC" 174 #define CONFIG_FEC_MXC 175 #define CONFIG_FEC_MXC_PHYADDR 0 176 #define IMX_FEC_BASE MXS_ENET0_BASE 177 #define CONFIG_MII 178 #define CONFIG_DISCOVER_PHY 179 #define CONFIG_FEC_XCV_TYPE RMII 180 #endif 181 182 /* USB */ 183 #ifdef CONFIG_CMD_USB 184 #define CONFIG_USB_EHCI 185 #define CONFIG_USB_EHCI_MXS 186 #define CONFIG_EHCI_MXS_PORT 1 187 #define CONFIG_EHCI_IS_TDI 188 #define CONFIG_USB_STORAGE 189 #endif 190 191 /* I2C */ 192 #ifdef CONFIG_CMD_I2C 193 #define CONFIG_I2C_MXS 194 #define CONFIG_HARD_I2C 195 #define CONFIG_SYS_I2C_SPEED 400000 196 #endif 197 198 /* RTC */ 199 #if defined(CONFIG_CMD_DATE) 200 #define CONFIG_RTC_PCF8563 201 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 202 #endif 203 204 /* Boot Linux */ 205 #define CONFIG_CMDLINE_TAG 206 #define CONFIG_SETUP_MEMORY_TAGS 207 #define CONFIG_BOOTDELAY 1 208 #define CONFIG_BOOTFILE "uImage" 209 #define CONFIG_BOOTCOMMAND "run bootcmd_nand" 210 #define CONFIG_LOADADDR 0x41000000 211 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 212 #define CONFIG_SERIAL_TAG 213 #define CONFIG_REVISION_TAG 214 215 /* Extra Environments */ 216 #define CONFIG_EXTRA_ENV_SETTINGS \ 217 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 218 "verify=no\0" \ 219 "bootcmd=run bootcmd_nand\0" \ 220 "kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \ 221 "bootargs_nand=" \ 222 "setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \ 223 "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \ 224 "bootcmd_nand=" \ 225 "run bootargs_nand && ubi part root 2048 && " \ 226 "ubifsmount rootfs && ubifsload 41000000 boot/uImage && " \ 227 "bootm 41000000\0" \ 228 "bootargs_mmc=" \ 229 "setenv bootargs ${kernelargs} " \ 230 "root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \ 231 "bootcmd_mmc=" \ 232 "run bootargs_mmc && mmc rescan && " \ 233 "ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \ 234 "" 235 236 #endif /* __CONFIG_H */ 237