1 /* 2 * 3 * Configuration settings for the Armadeus Project motherboard APF27 4 * 5 * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_VERSION_VARIABLE 14 #define CONFIG_ENV_VERSION 10 15 #define CONFIG_IDENT_STRING " apf27 patch 3.10" 16 #define CONFIG_BOARD_NAME apf27 17 18 /* 19 * SoC configurations 20 */ 21 #define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */ 22 #define CONFIG_MACH_TYPE 1698 /* APF27 */ 23 24 /* 25 * Enable the call to miscellaneous platform dependent initialization. 26 */ 27 #define CONFIG_SYS_NO_FLASH 28 29 /* 30 * Board display option 31 */ 32 #define CONFIG_DISPLAY_BOARDINFO 33 #define CONFIG_DISPLAY_CPUINFO 34 35 /* 36 * SPL 37 */ 38 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 39 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 40 #define CONFIG_SPL_MAX_SIZE 2048 41 #define CONFIG_SPL_TEXT_BASE 0xA0000000 42 #define CONFIG_SPL_SERIAL_SUPPORT 43 44 /* NAND boot config */ 45 #define CONFIG_SPL_NAND_SUPPORT 46 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 47 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 48 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 49 #define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800 50 51 /* 52 * BOOTP options 53 */ 54 #define CONFIG_BOOTP_SUBNETMASK 55 #define CONFIG_BOOTP_GATEWAY 56 #define CONFIG_BOOTP_HOSTNAME 57 #define CONFIG_BOOTP_BOOTPATH 58 #define CONFIG_BOOTP_BOOTFILESIZE 59 #define CONFIG_BOOTP_DNS 60 #define CONFIG_BOOTP_DNS2 61 62 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME 63 #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" 64 65 /* 66 * U-Boot Commands 67 */ 68 #define CONFIG_CMD_BSP /* Board Specific functions */ 69 #define CONFIG_CMD_DATE 70 #define CONFIG_CMD_EEPROM 71 #define CONFIG_CMD_IMX_FUSE /* imx iim fuse */ 72 #define CONFIG_CMD_MTDPARTS /* MTD partition support */ 73 #define CONFIG_CMD_NAND /* NAND support */ 74 #define CONFIG_CMD_NAND_LOCK_UNLOCK 75 #define CONFIG_CMD_NAND_TRIMFFS 76 #define CONFIG_CMD_UBI 77 #define CONFIG_CMD_UBIFS 78 79 /* 80 * Memory configurations 81 */ 82 #define CONFIG_NR_DRAM_POPULATED 1 83 #define CONFIG_NR_DRAM_BANKS 2 84 85 #define ACFG_SDRAM_MBYTE_SYZE 64 86 87 #define PHYS_SDRAM_1 0xA0000000 88 #define PHYS_SDRAM_2 0xB0000000 89 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 90 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10)) 91 #define CONFIG_SYS_MEMTEST_START 0xA0000000 /* memtest test area */ 92 #define CONFIG_SYS_MEMTEST_END 0xA0300000 /* 3 MiB RAM test */ 93 94 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \ 95 + PHYS_SDRAM_1_SIZE - 0x0100000) 96 97 #define CONFIG_SYS_TEXT_BASE 0xA0000800 98 99 /* 100 * FLASH organization 101 */ 102 #define ACFG_MONITOR_OFFSET 0x00000000 103 #define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */ 104 #define CONFIG_ENV_IS_IN_NAND 105 #define CONFIG_ENV_OVERWRITE 106 #define CONFIG_ENV_OFFSET 0x00100000 /* NAND offset */ 107 #define CONFIG_ENV_SIZE 0x00020000 /* 128kB */ 108 #define CONFIG_ENV_RANGE 0X00080000 /* 512kB */ 109 #define CONFIG_ENV_OFFSET_REDUND \ 110 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) /* +512kB */ 111 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* 512kB */ 112 #define CONFIG_FIRMWARE_OFFSET 0x00200000 113 #define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */ 114 #define CONFIG_KERNEL_OFFSET 0x00300000 115 #define CONFIG_ROOTFS_OFFSET 0x00800000 116 117 #define CONFIG_MTDMAP "mxc_nand.0" 118 #define MTDIDS_DEFAULT "nand0=" CONFIG_MTDMAP 119 #define MTDPARTS_DEFAULT "mtdparts=" CONFIG_MTDMAP \ 120 ":1M(u-boot)ro," \ 121 "512K(env)," \ 122 "512K(env2)," \ 123 "512K(firmware)," \ 124 "512K(dtb)," \ 125 "5M(kernel)," \ 126 "-(rootfs)" 127 128 /* 129 * U-Boot general configurations 130 */ 131 #define CONFIG_SYS_LONGHELP 132 #define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */ 133 #define CONFIG_SYS_PBSIZE \ 134 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 135 /* Print buffer size */ 136 #define CONFIG_SYS_MAXARGS 16 /* max command args */ 137 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 138 /* Boot argument buffer size */ 139 #define CONFIG_AUTO_COMPLETE 140 #define CONFIG_CMDLINE_EDITING 141 #define CONFIG_ENV_VARS_UBOOT_CONFIG 142 #define CONFIG_PREBOOT "run check_flash check_env;" 143 144 /* 145 * Boot Linux 146 */ 147 #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ 148 #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ 149 #define CONFIG_INITRD_TAG /* send initrd params */ 150 151 #define CONFIG_BOOTDELAY 5 152 #define CONFIG_ZERO_BOOTDELAY_CHECK 153 #define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" 154 #define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \ 155 __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \ 156 " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs " 157 158 #define ACFG_CONSOLE_DEV ttySMX0 159 #define CONFIG_BOOTCOMMAND "run ubifsboot" 160 #define CONFIG_SYS_AUTOLOAD "no" 161 /* 162 * Default load address for user programs and kernel 163 */ 164 #define CONFIG_LOADADDR 0xA0000000 165 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 166 167 /* 168 * Extra Environments 169 */ 170 #define CONFIG_EXTRA_ENV_SETTINGS \ 171 "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ 172 "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \ 173 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 174 "partition=nand0,6\0" \ 175 "u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \ 176 "env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \ 177 "firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \ 178 "firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \ 179 "kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \ 180 "rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \ 181 "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \ 182 "kernel_addr_r=A0000000\0" \ 183 "check_env=if test -n ${flash_env_version}; " \ 184 "then env default env_version; " \ 185 "else env set flash_env_version ${env_version}; env save; "\ 186 "fi; " \ 187 "if itest ${flash_env_version} < ${env_version}; then " \ 188 "echo \"*** Warning - Environment version" \ 189 " change suggests: run flash_reset_env; reset\"; "\ 190 "env default flash_reset_env; "\ 191 "fi; \0" \ 192 "check_flash=nand lock; nand unlock ${env_addr}; \0" \ 193 "flash_reset_env=env default -f -a; saveenv; run update_env;" \ 194 "echo Flash environment variables erased!\0" \ 195 "download_uboot=tftpboot ${loadaddr} ${board_name}" \ 196 "-u-boot-with-spl.bin\0" \ 197 "flash_uboot=nand unlock ${u-boot_addr} ;" \ 198 "nand erase.part u-boot;" \ 199 "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\ 200 "then nand lock; nand unlock ${env_addr};" \ 201 "echo Flashing of uboot succeed;" \ 202 "else echo Flashing of uboot failed;" \ 203 "fi; \0" \ 204 "update_uboot=run download_uboot flash_uboot\0" \ 205 "download_env=tftpboot ${loadaddr} ${board_name}" \ 206 "-u-boot-env.txt\0" \ 207 "flash_env=env import -t ${loadaddr}; env save; \0" \ 208 "update_env=run download_env flash_env\0" \ 209 "update_all=run update_env update_uboot\0" \ 210 "unlock_regs=mw 10000008 0; mw 10020008 0\0" \ 211 212 /* 213 * Serial Driver 214 */ 215 #define CONFIG_MXC_UART 216 #define CONFIG_CONS_INDEX 1 217 #define CONFIG_BAUDRATE 115200 218 #define CONFIG_MXC_UART_BASE UART1_BASE 219 220 /* 221 * GPIO 222 */ 223 #define CONFIG_MXC_GPIO 224 225 /* 226 * NOR 227 */ 228 229 /* 230 * NAND 231 */ 232 #define CONFIG_NAND_MXC 233 234 #define CONFIG_MXC_NAND_REGS_BASE 0xD8000000 235 #define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE 236 #define CONFIG_SYS_MAX_NAND_DEVICE 1 237 238 #define CONFIG_MXC_NAND_HWECC 239 #define CONFIG_SYS_NAND_LARGEPAGE 240 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 241 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 242 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 243 #define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \ 244 CONFIG_SYS_NAND_PAGE_SIZE 245 #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) 246 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 11 247 #define NAND_MAX_CHIPS 1 248 249 #define CONFIG_FLASH_SHOW_PROGRESS 45 250 #define CONFIG_SYS_NAND_QUIET 1 251 252 /* 253 * Partitions & Filsystems 254 */ 255 #define CONFIG_MTD_DEVICE 256 #define CONFIG_MTD_PARTITIONS 257 #define CONFIG_DOS_PARTITION 258 #define CONFIG_SUPPORT_VFAT 259 260 /* 261 * UBIFS 262 */ 263 #define CONFIG_RBTREE 264 #define CONFIG_LZO 265 266 /* 267 * Ethernet (on SOC imx FEC) 268 */ 269 #define CONFIG_FEC_MXC 270 #define CONFIG_FEC_MXC_PHYADDR 0x1f 271 #define CONFIG_MII /* MII PHY management */ 272 273 /* 274 * FPGA 275 */ 276 #ifndef CONFIG_SPL_BUILD 277 #define CONFIG_FPGA 278 #endif 279 #define CONFIG_FPGA_COUNT 1 280 #define CONFIG_FPGA_XILINX 281 #define CONFIG_FPGA_SPARTAN3 282 #define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */ 283 #define CONFIG_SYS_FPGA_PROG_FEEDBACK 284 #define CONFIG_SYS_FPGA_CHECK_CTRLC 285 #define CONFIG_SYS_FPGA_CHECK_ERROR 286 287 /* 288 * Fuses - IIM 289 */ 290 #ifdef CONFIG_CMD_IMX_FUSE 291 #define IIM_MAC_BANK 0 292 #define IIM_MAC_ROW 5 293 #define IIM0_SCC_KEY 11 294 #define IIM1_SUID 1 295 #endif 296 297 /* 298 * I2C 299 */ 300 301 #ifdef CONFIG_CMD_I2C 302 #define CONFIG_SYS_I2C 303 #define CONFIG_SYS_I2C_MXC 304 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 305 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 306 #define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */ 307 #define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F 308 #define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */ 309 #define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F 310 #define CONFIG_SYS_I2C_NOPROBES { } 311 312 #ifdef CONFIG_CMD_EEPROM 313 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */ 314 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ 315 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 316 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */ 317 #endif /* CONFIG_CMD_EEPROM */ 318 #endif /* CONFIG_CMD_I2C */ 319 320 /* 321 * SD/MMC 322 */ 323 #ifdef CONFIG_CMD_MMC 324 #define CONFIG_MMC 325 #define CONFIG_GENERIC_MMC 326 #define CONFIG_MXC_MMC 327 #define CONFIG_MXC_MCI_REGS_BASE 0x10014000 328 #endif 329 330 /* 331 * RTC 332 */ 333 #ifdef CONFIG_CMD_DATE 334 #define CONFIG_RTC_DS1374 335 #define CONFIG_SYS_RTC_BUS_NUM 0 336 #endif /* CONFIG_CMD_DATE */ 337 338 /* 339 * PLL 340 * 341 * 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0 342 * |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------| 343 */ 344 #define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */ 345 346 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */ 347 /* micron 64MB */ 348 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 349 #define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ 350 #endif 351 352 #if (ACFG_SDRAM_MBYTE_SYZE == 128) 353 /* micron 128MB */ 354 #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ 355 #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ 356 #endif 357 358 #if (ACFG_SDRAM_MBYTE_SYZE == 256) 359 /* micron 256MB */ 360 #define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ 361 #define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */ 362 #endif 363 364 #endif /* __CONFIG_H */ 365