xref: /openbmc/u-boot/include/configs/apf27.h (revision aa5e3e22)
1 /*
2  *
3  * Configuration settings for the Armadeus Project motherboard APF27
4  *
5  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
6  *
7  * SPDX-License-Identifier:    GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #define CONFIG_ENV_VERSION	10
14 #define CONFIG_BOARD_NAME apf27
15 
16 /*
17  * SoC configurations
18  */
19 #define CONFIG_MX27			/* This is a Freescale i.MX27 Chip */
20 #define CONFIG_MACH_TYPE	1698	/* APF27 */
21 
22 /*
23  * Enable the call to miscellaneous platform dependent initialization.
24  */
25 
26 /*
27  * SPL
28  */
29 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
30 #define CONFIG_SPL_MAX_SIZE	2048
31 #define CONFIG_SPL_TEXT_BASE    0xA0000000
32 
33 /* NAND boot config */
34 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
35 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
36 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
37 #define CONFIG_SYS_NAND_U_BOOT_SIZE	CONFIG_SYS_MONITOR_LEN - 0x800
38 
39 /*
40  * BOOTP options
41  */
42 #define CONFIG_BOOTP_BOOTFILESIZE
43 #define CONFIG_BOOTP_DNS2
44 
45 #define CONFIG_HOSTNAME	CONFIG_BOARD_NAME
46 #define CONFIG_ROOTPATH	"/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
47 
48 /*
49  * Memory configurations
50  */
51 #define CONFIG_NR_DRAM_POPULATED 1
52 #define CONFIG_NR_DRAM_BANKS	2
53 
54 #define ACFG_SDRAM_MBYTE_SYZE 64
55 
56 #define PHYS_SDRAM_1			0xA0000000
57 #define PHYS_SDRAM_2			0xB0000000
58 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
59 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (512<<10))
60 #define CONFIG_SYS_MEMTEST_START	0xA0000000	/* memtest test area  */
61 #define CONFIG_SYS_MEMTEST_END		0xA0300000	/* 3 MiB RAM test */
62 
63 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE	\
64 		+ PHYS_SDRAM_1_SIZE - 0x0100000)
65 
66 /*
67  * FLASH organization
68  */
69 #define	ACFG_MONITOR_OFFSET		0x00000000
70 #define	CONFIG_SYS_MONITOR_LEN		0x00100000	/* 1MiB */
71 #define	CONFIG_ENV_OVERWRITE
72 #define	CONFIG_ENV_OFFSET		0x00100000	/* NAND offset */
73 #define	CONFIG_ENV_SIZE			0x00020000	/* 128kB  */
74 #define CONFIG_ENV_RANGE		0X00080000	/* 512kB */
75 #define	CONFIG_ENV_OFFSET_REDUND	\
76 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)	/* +512kB */
77 #define	CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE	/* 512kB */
78 #define	CONFIG_FIRMWARE_OFFSET		0x00200000
79 #define	CONFIG_FIRMWARE_SIZE		0x00080000	/* 512kB  */
80 #define	CONFIG_KERNEL_OFFSET		0x00300000
81 #define	CONFIG_ROOTFS_OFFSET		0x00800000
82 
83 /*
84  * U-Boot general configurations
85  */
86 #define CONFIG_SYS_CBSIZE		2048		/* console I/O buffer */
87 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
88 						/* Boot argument buffer size */
89 #define CONFIG_PREBOOT			"run check_flash check_env;"
90 
91 /*
92  * Boot Linux
93  */
94 #define CONFIG_CMDLINE_TAG		/* send commandline to Kernel	*/
95 #define CONFIG_SETUP_MEMORY_TAGS	/* send memory definition to kernel */
96 #define CONFIG_INITRD_TAG		/* send initrd params	*/
97 
98 #define	CONFIG_BOOTFILE		__stringify(CONFIG_BOARD_NAME) "-linux.bin"
99 
100 #define ACFG_CONSOLE_DEV	ttySMX0
101 #define CONFIG_BOOTCOMMAND	"run ubifsboot"
102 #define CONFIG_SYS_AUTOLOAD	"no"
103 /*
104  * Default load address for user programs and kernel
105  */
106 #define CONFIG_LOADADDR			0xA0000000
107 #define	CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
108 
109 /*
110  * Extra Environments
111  */
112 #define CONFIG_EXTRA_ENV_SETTINGS \
113 	"env_version="		__stringify(CONFIG_ENV_VERSION)		"\0" \
114 	"consoledev="		__stringify(ACFG_CONSOLE_DEV)		"\0" \
115 	"mtdparts="	 	CONFIG_MTDPARTS_DEFAULT	"\0" \
116 	"partition=nand0,6\0"						\
117 	"u-boot_addr="		__stringify(ACFG_MONITOR_OFFSET)	"\0" \
118 	"env_addr="		__stringify(CONFIG_ENV_OFFSET)		"\0" \
119 	"firmware_addr="	__stringify(CONFIG_FIRMWARE_OFFSET)	"\0" \
120 	"firmware_size="	__stringify(CONFIG_FIRMWARE_SIZE)	"\0" \
121 	"kernel_addr="		__stringify(CONFIG_KERNEL_OFFSET)	"\0" \
122 	"rootfs_addr="		__stringify(CONFIG_ROOTFS_OFFSET)	"\0" \
123 	"board_name="		__stringify(CONFIG_BOARD_NAME)		"\0" \
124 	"kernel_addr_r=A0000000\0" \
125 	"check_env=if test -n ${flash_env_version}; "			\
126 		"then env default env_version; "			\
127 		"else env set flash_env_version ${env_version}; env save; "\
128 		"fi; "							\
129 		"if itest ${flash_env_version} < ${env_version}; then " \
130 			"echo \"*** Warning - Environment version"	\
131 			" change suggests: run flash_reset_env; reset\"; "\
132 			"env default flash_reset_env; "\
133 		"fi; \0"						\
134 	"check_flash=nand lock; nand unlock ${env_addr}; \0"	\
135 	"flash_reset_env=env default -f -a; saveenv; run update_env;"	\
136 		"echo Flash environment variables erased!\0"		\
137 	"download_uboot=tftpboot ${loadaddr} ${board_name}"		\
138 		"-u-boot-with-spl.bin\0"				\
139 	"flash_uboot=nand unlock ${u-boot_addr} ;"			\
140 		"nand erase.part u-boot;"		\
141 		"if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
142 			"then nand lock; nand unlock ${env_addr};"	\
143 				"echo Flashing of uboot succeed;"	\
144 			"else echo Flashing of uboot failed;"		\
145 		"fi; \0"						\
146 	"update_uboot=run download_uboot flash_uboot\0"			\
147 	"download_env=tftpboot ${loadaddr} ${board_name}"		\
148 		"-u-boot-env.txt\0"				\
149 	"flash_env=env import -t ${loadaddr}; env save; \0"		\
150 	"update_env=run download_env flash_env\0"			\
151 	"update_all=run update_env update_uboot\0"			\
152 	"unlock_regs=mw 10000008 0; mw 10020008 0\0"			\
153 
154 /*
155  * Serial Driver
156  */
157 #define CONFIG_MXC_UART
158 #define CONFIG_CONS_INDEX		1
159 #define CONFIG_MXC_UART_BASE		UART1_BASE
160 
161 /*
162  * NOR
163  */
164 
165 /*
166  * NAND
167  */
168 
169 #define CONFIG_MXC_NAND_REGS_BASE	0xD8000000
170 #define CONFIG_SYS_NAND_BASE		CONFIG_MXC_NAND_REGS_BASE
171 #define CONFIG_SYS_MAX_NAND_DEVICE	1
172 
173 #define CONFIG_MXC_NAND_HWECC
174 #define CONFIG_SYS_NAND_LARGEPAGE
175 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
176 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
177 #define CONFIG_SYS_NAND_PAGE_COUNT	CONFIG_SYS_NAND_BLOCK_SIZE / \
178 						CONFIG_SYS_NAND_PAGE_SIZE
179 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
180 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	11
181 #define NAND_MAX_CHIPS			1
182 
183 #define CONFIG_FLASH_SHOW_PROGRESS	45
184 #define CONFIG_SYS_NAND_QUIET		1
185 
186 /*
187  * Partitions & Filsystems
188  */
189 #define CONFIG_MTD_DEVICE
190 #define CONFIG_MTD_PARTITIONS
191 
192 /*
193  * Ethernet (on SOC imx FEC)
194  */
195 #define CONFIG_FEC_MXC
196 #define CONFIG_FEC_MXC_PHYADDR		0x1f
197 #define CONFIG_MII				/* MII PHY management	*/
198 
199 /*
200  * FPGA
201  */
202 #define CONFIG_FPGA_COUNT		1
203 #define CONFIG_SYS_FPGA_WAIT		250 /* 250 ms */
204 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
205 #define CONFIG_SYS_FPGA_CHECK_CTRLC
206 #define CONFIG_SYS_FPGA_CHECK_ERROR
207 
208 /*
209  * Fuses - IIM
210  */
211 #ifdef CONFIG_CMD_IMX_FUSE
212 #define IIM_MAC_BANK		0
213 #define IIM_MAC_ROW		5
214 #define IIM0_SCC_KEY		11
215 #define IIM1_SUID		1
216 #endif
217 
218 /*
219  * I2C
220  */
221 
222 #ifdef CONFIG_CMD_I2C
223 #define CONFIG_SYS_I2C
224 #define CONFIG_SYS_I2C_MXC
225 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
226 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
227 #define CONFIG_SYS_MXC_I2C1_SPEED	100000	/* 100 kHz */
228 #define CONFIG_SYS_MXC_I2C1_SLAVE	0x7F
229 #define CONFIG_SYS_MXC_I2C2_SPEED	100000	/* 100 kHz */
230 #define CONFIG_SYS_MXC_I2C2_SLAVE	0x7F
231 #define CONFIG_SYS_I2C_NOPROBES		{ }
232 
233 #ifdef CONFIG_CMD_EEPROM
234 # define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24LC02 */
235 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address */
236 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
237 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* msec */
238 #endif /* CONFIG_CMD_EEPROM */
239 #endif /* CONFIG_CMD_I2C */
240 
241 /*
242  * SD/MMC
243  */
244 #ifdef CONFIG_CMD_MMC
245 #define CONFIG_MXC_MCI_REGS_BASE	0x10014000
246 #endif
247 
248 /*
249  * RTC
250  */
251 #ifdef CONFIG_CMD_DATE
252 #define CONFIG_RTC_DS1374
253 #define CONFIG_SYS_RTC_BUS_NUM		0
254 #endif /* CONFIG_CMD_DATE */
255 
256 /*
257  * PLL
258  *
259  *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
260  *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
261  */
262 #define CONFIG_MX27_CLK32		32768	/* 32768 or 32000 Hz crystal */
263 
264 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
265 /* micron 64MB */
266 #define PHYS_SDRAM_1_SIZE			0x04000000 /* 64 MB */
267 #define PHYS_SDRAM_2_SIZE			0x04000000 /* 64 MB */
268 #endif
269 
270 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
271 /* micron 128MB */
272 #define PHYS_SDRAM_1_SIZE			0x08000000 /* 128 MB */
273 #define PHYS_SDRAM_2_SIZE			0x08000000 /* 128 MB */
274 #endif
275 
276 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
277 /* micron 256MB */
278 #define PHYS_SDRAM_1_SIZE			0x10000000 /* 256 MB */
279 #define PHYS_SDRAM_2_SIZE			0x10000000 /* 256 MB */
280 #endif
281 
282 #endif /* __CONFIG_H */
283