1 /* 2 * 3 * Configuration settings for the Armadeus Project motherboard APF27 4 * 5 * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_ENV_VERSION 10 14 #define CONFIG_BOARD_NAME apf27 15 16 /* 17 * SoC configurations 18 */ 19 #define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */ 20 #define CONFIG_MACH_TYPE 1698 /* APF27 */ 21 22 /* 23 * Enable the call to miscellaneous platform dependent initialization. 24 */ 25 26 /* 27 * SPL 28 */ 29 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 30 #define CONFIG_SPL_MAX_SIZE 2048 31 #define CONFIG_SPL_TEXT_BASE 0xA0000000 32 33 /* NAND boot config */ 34 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 35 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 36 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 37 #define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800 38 39 /* 40 * BOOTP options 41 */ 42 #define CONFIG_BOOTP_SUBNETMASK 43 #define CONFIG_BOOTP_GATEWAY 44 #define CONFIG_BOOTP_HOSTNAME 45 #define CONFIG_BOOTP_BOOTPATH 46 #define CONFIG_BOOTP_BOOTFILESIZE 47 #define CONFIG_BOOTP_DNS 48 #define CONFIG_BOOTP_DNS2 49 50 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME 51 #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" 52 53 /* 54 * Memory configurations 55 */ 56 #define CONFIG_NR_DRAM_POPULATED 1 57 #define CONFIG_NR_DRAM_BANKS 2 58 59 #define ACFG_SDRAM_MBYTE_SYZE 64 60 61 #define PHYS_SDRAM_1 0xA0000000 62 #define PHYS_SDRAM_2 0xB0000000 63 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 64 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10)) 65 #define CONFIG_SYS_MEMTEST_START 0xA0000000 /* memtest test area */ 66 #define CONFIG_SYS_MEMTEST_END 0xA0300000 /* 3 MiB RAM test */ 67 68 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \ 69 + PHYS_SDRAM_1_SIZE - 0x0100000) 70 71 #define CONFIG_SYS_TEXT_BASE 0xA0000800 72 73 /* 74 * FLASH organization 75 */ 76 #define ACFG_MONITOR_OFFSET 0x00000000 77 #define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */ 78 #define CONFIG_ENV_OVERWRITE 79 #define CONFIG_ENV_OFFSET 0x00100000 /* NAND offset */ 80 #define CONFIG_ENV_SIZE 0x00020000 /* 128kB */ 81 #define CONFIG_ENV_RANGE 0X00080000 /* 512kB */ 82 #define CONFIG_ENV_OFFSET_REDUND \ 83 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) /* +512kB */ 84 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* 512kB */ 85 #define CONFIG_FIRMWARE_OFFSET 0x00200000 86 #define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */ 87 #define CONFIG_KERNEL_OFFSET 0x00300000 88 #define CONFIG_ROOTFS_OFFSET 0x00800000 89 90 #define CONFIG_MTDMAP "mxc_nand.0" 91 #define MTDIDS_DEFAULT "nand0=" CONFIG_MTDMAP 92 #define MTDPARTS_DEFAULT "mtdparts=" CONFIG_MTDMAP \ 93 ":1M(u-boot)ro," \ 94 "512K(env)," \ 95 "512K(env2)," \ 96 "512K(firmware)," \ 97 "512K(dtb)," \ 98 "5M(kernel)," \ 99 "-(rootfs)" 100 101 /* 102 * U-Boot general configurations 103 */ 104 #define CONFIG_SYS_LONGHELP 105 #define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */ 106 #define CONFIG_SYS_PBSIZE \ 107 (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 108 /* Print buffer size */ 109 #define CONFIG_SYS_MAXARGS 16 /* max command args */ 110 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 111 /* Boot argument buffer size */ 112 #define CONFIG_AUTO_COMPLETE 113 #define CONFIG_CMDLINE_EDITING 114 #define CONFIG_ENV_VARS_UBOOT_CONFIG 115 #define CONFIG_PREBOOT "run check_flash check_env;" 116 117 /* 118 * Boot Linux 119 */ 120 #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ 121 #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ 122 #define CONFIG_INITRD_TAG /* send initrd params */ 123 124 #define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" 125 126 #define ACFG_CONSOLE_DEV ttySMX0 127 #define CONFIG_BOOTCOMMAND "run ubifsboot" 128 #define CONFIG_SYS_AUTOLOAD "no" 129 /* 130 * Default load address for user programs and kernel 131 */ 132 #define CONFIG_LOADADDR 0xA0000000 133 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 134 135 /* 136 * Extra Environments 137 */ 138 #define CONFIG_EXTRA_ENV_SETTINGS \ 139 "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ 140 "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \ 141 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 142 "partition=nand0,6\0" \ 143 "u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \ 144 "env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \ 145 "firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \ 146 "firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \ 147 "kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \ 148 "rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \ 149 "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \ 150 "kernel_addr_r=A0000000\0" \ 151 "check_env=if test -n ${flash_env_version}; " \ 152 "then env default env_version; " \ 153 "else env set flash_env_version ${env_version}; env save; "\ 154 "fi; " \ 155 "if itest ${flash_env_version} < ${env_version}; then " \ 156 "echo \"*** Warning - Environment version" \ 157 " change suggests: run flash_reset_env; reset\"; "\ 158 "env default flash_reset_env; "\ 159 "fi; \0" \ 160 "check_flash=nand lock; nand unlock ${env_addr}; \0" \ 161 "flash_reset_env=env default -f -a; saveenv; run update_env;" \ 162 "echo Flash environment variables erased!\0" \ 163 "download_uboot=tftpboot ${loadaddr} ${board_name}" \ 164 "-u-boot-with-spl.bin\0" \ 165 "flash_uboot=nand unlock ${u-boot_addr} ;" \ 166 "nand erase.part u-boot;" \ 167 "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\ 168 "then nand lock; nand unlock ${env_addr};" \ 169 "echo Flashing of uboot succeed;" \ 170 "else echo Flashing of uboot failed;" \ 171 "fi; \0" \ 172 "update_uboot=run download_uboot flash_uboot\0" \ 173 "download_env=tftpboot ${loadaddr} ${board_name}" \ 174 "-u-boot-env.txt\0" \ 175 "flash_env=env import -t ${loadaddr}; env save; \0" \ 176 "update_env=run download_env flash_env\0" \ 177 "update_all=run update_env update_uboot\0" \ 178 "unlock_regs=mw 10000008 0; mw 10020008 0\0" \ 179 180 /* 181 * Serial Driver 182 */ 183 #define CONFIG_MXC_UART 184 #define CONFIG_CONS_INDEX 1 185 #define CONFIG_MXC_UART_BASE UART1_BASE 186 187 /* 188 * GPIO 189 */ 190 #define CONFIG_MXC_GPIO 191 192 /* 193 * NOR 194 */ 195 196 /* 197 * NAND 198 */ 199 #define CONFIG_NAND_MXC 200 201 #define CONFIG_MXC_NAND_REGS_BASE 0xD8000000 202 #define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE 203 #define CONFIG_SYS_MAX_NAND_DEVICE 1 204 205 #define CONFIG_MXC_NAND_HWECC 206 #define CONFIG_SYS_NAND_LARGEPAGE 207 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 208 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 209 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 210 #define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \ 211 CONFIG_SYS_NAND_PAGE_SIZE 212 #define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) 213 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 11 214 #define NAND_MAX_CHIPS 1 215 216 #define CONFIG_FLASH_SHOW_PROGRESS 45 217 #define CONFIG_SYS_NAND_QUIET 1 218 219 /* 220 * Partitions & Filsystems 221 */ 222 #define CONFIG_MTD_DEVICE 223 #define CONFIG_MTD_PARTITIONS 224 #define CONFIG_SUPPORT_VFAT 225 226 /* 227 * Ethernet (on SOC imx FEC) 228 */ 229 #define CONFIG_FEC_MXC 230 #define CONFIG_FEC_MXC_PHYADDR 0x1f 231 #define CONFIG_MII /* MII PHY management */ 232 233 /* 234 * FPGA 235 */ 236 #ifndef CONFIG_SPL_BUILD 237 #define CONFIG_FPGA 238 #endif 239 #define CONFIG_FPGA_COUNT 1 240 #define CONFIG_FPGA_XILINX 241 #define CONFIG_FPGA_SPARTAN3 242 #define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */ 243 #define CONFIG_SYS_FPGA_PROG_FEEDBACK 244 #define CONFIG_SYS_FPGA_CHECK_CTRLC 245 #define CONFIG_SYS_FPGA_CHECK_ERROR 246 247 /* 248 * Fuses - IIM 249 */ 250 #ifdef CONFIG_CMD_IMX_FUSE 251 #define IIM_MAC_BANK 0 252 #define IIM_MAC_ROW 5 253 #define IIM0_SCC_KEY 11 254 #define IIM1_SUID 1 255 #endif 256 257 /* 258 * I2C 259 */ 260 261 #ifdef CONFIG_CMD_I2C 262 #define CONFIG_SYS_I2C 263 #define CONFIG_SYS_I2C_MXC 264 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 265 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 266 #define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */ 267 #define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F 268 #define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */ 269 #define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F 270 #define CONFIG_SYS_I2C_NOPROBES { } 271 272 #ifdef CONFIG_CMD_EEPROM 273 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */ 274 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ 275 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 276 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */ 277 #endif /* CONFIG_CMD_EEPROM */ 278 #endif /* CONFIG_CMD_I2C */ 279 280 /* 281 * SD/MMC 282 */ 283 #ifdef CONFIG_CMD_MMC 284 #define CONFIG_MXC_MCI_REGS_BASE 0x10014000 285 #endif 286 287 /* 288 * RTC 289 */ 290 #ifdef CONFIG_CMD_DATE 291 #define CONFIG_RTC_DS1374 292 #define CONFIG_SYS_RTC_BUS_NUM 0 293 #endif /* CONFIG_CMD_DATE */ 294 295 /* 296 * PLL 297 * 298 * 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0 299 * |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------| 300 */ 301 #define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */ 302 303 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */ 304 /* micron 64MB */ 305 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 306 #define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ 307 #endif 308 309 #if (ACFG_SDRAM_MBYTE_SYZE == 128) 310 /* micron 128MB */ 311 #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ 312 #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ 313 #endif 314 315 #if (ACFG_SDRAM_MBYTE_SYZE == 256) 316 /* micron 256MB */ 317 #define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ 318 #define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */ 319 #endif 320 321 #endif /* __CONFIG_H */ 322