xref: /openbmc/u-boot/include/configs/apf27.h (revision 8ee59472)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  *
4  * Configuration settings for the Armadeus Project motherboard APF27
5  *
6  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #define CONFIG_ENV_VERSION	10
13 #define CONFIG_BOARD_NAME apf27
14 
15 /*
16  * SoC configurations
17  */
18 #define CONFIG_MX27			/* This is a Freescale i.MX27 Chip */
19 #define CONFIG_MACH_TYPE	1698	/* APF27 */
20 
21 /*
22  * Enable the call to miscellaneous platform dependent initialization.
23  */
24 
25 /*
26  * SPL
27  */
28 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
29 #define CONFIG_SPL_MAX_SIZE	2048
30 #define CONFIG_SPL_TEXT_BASE    0xA0000000
31 
32 /* NAND boot config */
33 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
34 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
35 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
36 #define CONFIG_SYS_NAND_U_BOOT_SIZE	CONFIG_SYS_MONITOR_LEN - 0x800
37 
38 /*
39  * BOOTP options
40  */
41 #define CONFIG_BOOTP_BOOTFILESIZE
42 #define CONFIG_BOOTP_DNS2
43 
44 #define CONFIG_HOSTNAME	"apf27"
45 #define CONFIG_ROOTPATH	"/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
46 
47 /*
48  * Memory configurations
49  */
50 #define CONFIG_NR_DRAM_POPULATED 1
51 #define CONFIG_NR_DRAM_BANKS	2
52 
53 #define ACFG_SDRAM_MBYTE_SYZE 64
54 
55 #define PHYS_SDRAM_1			0xA0000000
56 #define PHYS_SDRAM_2			0xB0000000
57 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
58 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (512<<10))
59 #define CONFIG_SYS_MEMTEST_START	0xA0000000	/* memtest test area  */
60 #define CONFIG_SYS_MEMTEST_END		0xA0300000	/* 3 MiB RAM test */
61 
62 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE	\
63 		+ PHYS_SDRAM_1_SIZE - 0x0100000)
64 
65 /*
66  * FLASH organization
67  */
68 #define	ACFG_MONITOR_OFFSET		0x00000000
69 #define	CONFIG_SYS_MONITOR_LEN		0x00100000	/* 1MiB */
70 #define	CONFIG_ENV_OVERWRITE
71 #define	CONFIG_ENV_OFFSET		0x00100000	/* NAND offset */
72 #define	CONFIG_ENV_SIZE			0x00020000	/* 128kB  */
73 #define CONFIG_ENV_RANGE		0X00080000	/* 512kB */
74 #define	CONFIG_ENV_OFFSET_REDUND	\
75 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)	/* +512kB */
76 #define	CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE	/* 512kB */
77 #define	CONFIG_FIRMWARE_OFFSET		0x00200000
78 #define	CONFIG_FIRMWARE_SIZE		0x00080000	/* 512kB  */
79 #define	CONFIG_KERNEL_OFFSET		0x00300000
80 #define	CONFIG_ROOTFS_OFFSET		0x00800000
81 
82 /*
83  * U-Boot general configurations
84  */
85 #define CONFIG_SYS_CBSIZE		2048		/* console I/O buffer */
86 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
87 						/* Boot argument buffer size */
88 #define CONFIG_PREBOOT			"run check_flash check_env;"
89 
90 /*
91  * Boot Linux
92  */
93 #define CONFIG_CMDLINE_TAG		/* send commandline to Kernel	*/
94 #define CONFIG_SETUP_MEMORY_TAGS	/* send memory definition to kernel */
95 #define CONFIG_INITRD_TAG		/* send initrd params	*/
96 
97 #define	CONFIG_BOOTFILE		__stringify(CONFIG_BOARD_NAME) "-linux.bin"
98 
99 #define ACFG_CONSOLE_DEV	ttySMX0
100 #define CONFIG_BOOTCOMMAND	"run ubifsboot"
101 #define CONFIG_SYS_AUTOLOAD	"no"
102 /*
103  * Default load address for user programs and kernel
104  */
105 #define CONFIG_LOADADDR			0xA0000000
106 #define	CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
107 
108 /*
109  * Extra Environments
110  */
111 #define CONFIG_EXTRA_ENV_SETTINGS \
112 	"env_version="		__stringify(CONFIG_ENV_VERSION)		"\0" \
113 	"consoledev="		__stringify(ACFG_CONSOLE_DEV)		"\0" \
114 	"mtdparts="	 	CONFIG_MTDPARTS_DEFAULT	"\0" \
115 	"partition=nand0,6\0"						\
116 	"u-boot_addr="		__stringify(ACFG_MONITOR_OFFSET)	"\0" \
117 	"env_addr="		__stringify(CONFIG_ENV_OFFSET)		"\0" \
118 	"firmware_addr="	__stringify(CONFIG_FIRMWARE_OFFSET)	"\0" \
119 	"firmware_size="	__stringify(CONFIG_FIRMWARE_SIZE)	"\0" \
120 	"kernel_addr="		__stringify(CONFIG_KERNEL_OFFSET)	"\0" \
121 	"rootfs_addr="		__stringify(CONFIG_ROOTFS_OFFSET)	"\0" \
122 	"board_name="		__stringify(CONFIG_BOARD_NAME)		"\0" \
123 	"kernel_addr_r=A0000000\0" \
124 	"check_env=if test -n ${flash_env_version}; "			\
125 		"then env default env_version; "			\
126 		"else env set flash_env_version ${env_version}; env save; "\
127 		"fi; "							\
128 		"if itest ${flash_env_version} < ${env_version}; then " \
129 			"echo \"*** Warning - Environment version"	\
130 			" change suggests: run flash_reset_env; reset\"; "\
131 			"env default flash_reset_env; "\
132 		"fi; \0"						\
133 	"check_flash=nand lock; nand unlock ${env_addr}; \0"	\
134 	"flash_reset_env=env default -f -a; saveenv; run update_env;"	\
135 		"echo Flash environment variables erased!\0"		\
136 	"download_uboot=tftpboot ${loadaddr} ${board_name}"		\
137 		"-u-boot-with-spl.bin\0"				\
138 	"flash_uboot=nand unlock ${u-boot_addr} ;"			\
139 		"nand erase.part u-boot;"		\
140 		"if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
141 			"then nand lock; nand unlock ${env_addr};"	\
142 				"echo Flashing of uboot succeed;"	\
143 			"else echo Flashing of uboot failed;"		\
144 		"fi; \0"						\
145 	"update_uboot=run download_uboot flash_uboot\0"			\
146 	"download_env=tftpboot ${loadaddr} ${board_name}"		\
147 		"-u-boot-env.txt\0"				\
148 	"flash_env=env import -t ${loadaddr}; env save; \0"		\
149 	"update_env=run download_env flash_env\0"			\
150 	"update_all=run update_env update_uboot\0"			\
151 	"unlock_regs=mw 10000008 0; mw 10020008 0\0"			\
152 
153 /*
154  * Serial Driver
155  */
156 #define CONFIG_MXC_UART
157 #define CONFIG_MXC_UART_BASE		UART1_BASE
158 
159 /*
160  * NOR
161  */
162 
163 /*
164  * NAND
165  */
166 
167 #define CONFIG_MXC_NAND_REGS_BASE	0xD8000000
168 #define CONFIG_SYS_NAND_BASE		CONFIG_MXC_NAND_REGS_BASE
169 #define CONFIG_SYS_MAX_NAND_DEVICE	1
170 
171 #define CONFIG_MXC_NAND_HWECC
172 #define CONFIG_SYS_NAND_LARGEPAGE
173 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
174 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
175 #define CONFIG_SYS_NAND_PAGE_COUNT	CONFIG_SYS_NAND_BLOCK_SIZE / \
176 						CONFIG_SYS_NAND_PAGE_SIZE
177 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
178 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	11
179 #define NAND_MAX_CHIPS			1
180 
181 #define CONFIG_FLASH_SHOW_PROGRESS	45
182 #define CONFIG_SYS_NAND_QUIET		1
183 
184 /*
185  * Partitions & Filsystems
186  */
187 #define CONFIG_MTD_DEVICE
188 #define CONFIG_MTD_PARTITIONS
189 
190 /*
191  * Ethernet (on SOC imx FEC)
192  */
193 #define CONFIG_FEC_MXC
194 #define CONFIG_FEC_MXC_PHYADDR		0x1f
195 #define CONFIG_MII				/* MII PHY management	*/
196 
197 /*
198  * FPGA
199  */
200 #define CONFIG_FPGA_COUNT		1
201 #define CONFIG_SYS_FPGA_WAIT		250 /* 250 ms */
202 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
203 #define CONFIG_SYS_FPGA_CHECK_CTRLC
204 #define CONFIG_SYS_FPGA_CHECK_ERROR
205 
206 /*
207  * Fuses - IIM
208  */
209 #ifdef CONFIG_CMD_IMX_FUSE
210 #define IIM_MAC_BANK		0
211 #define IIM_MAC_ROW		5
212 #define IIM0_SCC_KEY		11
213 #define IIM1_SUID		1
214 #endif
215 
216 /*
217  * I2C
218  */
219 
220 #ifdef CONFIG_CMD_I2C
221 #define CONFIG_SYS_I2C
222 #define CONFIG_SYS_I2C_MXC
223 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
224 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
225 #define CONFIG_SYS_MXC_I2C1_SPEED	100000	/* 100 kHz */
226 #define CONFIG_SYS_MXC_I2C1_SLAVE	0x7F
227 #define CONFIG_SYS_MXC_I2C2_SPEED	100000	/* 100 kHz */
228 #define CONFIG_SYS_MXC_I2C2_SLAVE	0x7F
229 #define CONFIG_SYS_I2C_NOPROBES		{ }
230 
231 #ifdef CONFIG_CMD_EEPROM
232 # define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24LC02 */
233 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address */
234 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
235 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* msec */
236 #endif /* CONFIG_CMD_EEPROM */
237 #endif /* CONFIG_CMD_I2C */
238 
239 /*
240  * SD/MMC
241  */
242 #ifdef CONFIG_CMD_MMC
243 #define CONFIG_MXC_MCI_REGS_BASE	0x10014000
244 #endif
245 
246 /*
247  * RTC
248  */
249 #ifdef CONFIG_CMD_DATE
250 #define CONFIG_RTC_DS1374
251 #define CONFIG_SYS_RTC_BUS_NUM		0
252 #endif /* CONFIG_CMD_DATE */
253 
254 /*
255  * PLL
256  *
257  *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
258  *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
259  */
260 #define CONFIG_MX27_CLK32		32768	/* 32768 or 32000 Hz crystal */
261 
262 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
263 /* micron 64MB */
264 #define PHYS_SDRAM_1_SIZE			0x04000000 /* 64 MB */
265 #define PHYS_SDRAM_2_SIZE			0x04000000 /* 64 MB */
266 #endif
267 
268 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
269 /* micron 128MB */
270 #define PHYS_SDRAM_1_SIZE			0x08000000 /* 128 MB */
271 #define PHYS_SDRAM_2_SIZE			0x08000000 /* 128 MB */
272 #endif
273 
274 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
275 /* micron 256MB */
276 #define PHYS_SDRAM_1_SIZE			0x10000000 /* 256 MB */
277 #define PHYS_SDRAM_2_SIZE			0x10000000 /* 256 MB */
278 #endif
279 
280 #endif /* __CONFIG_H */
281