xref: /openbmc/u-boot/include/configs/apf27.h (revision 730d2544)
1 /*
2  *
3  * Configuration settings for the Armadeus Project motherboard APF27
4  *
5  * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
6  *
7  * SPDX-License-Identifier:    GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #define CONFIG_ENV_VERSION	10
14 #define CONFIG_BOARD_NAME apf27
15 
16 /*
17  * SoC configurations
18  */
19 #define CONFIG_MX27			/* This is a Freescale i.MX27 Chip */
20 #define CONFIG_MACH_TYPE	1698	/* APF27 */
21 
22 /*
23  * Enable the call to miscellaneous platform dependent initialization.
24  */
25 #define CONFIG_SYS_NO_FLASH
26 
27 /*
28  * SPL
29  */
30 #define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
31 #define CONFIG_SPL_LDSCRIPT	"arch/$(ARCH)/cpu/u-boot-spl.lds"
32 #define CONFIG_SPL_MAX_SIZE	2048
33 #define CONFIG_SPL_TEXT_BASE    0xA0000000
34 
35 /* NAND boot config */
36 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
37 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x800
38 #define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
39 #define CONFIG_SYS_NAND_U_BOOT_SIZE	CONFIG_SYS_MONITOR_LEN - 0x800
40 
41 /*
42  * BOOTP options
43  */
44 #define CONFIG_BOOTP_SUBNETMASK
45 #define CONFIG_BOOTP_GATEWAY
46 #define CONFIG_BOOTP_HOSTNAME
47 #define CONFIG_BOOTP_BOOTPATH
48 #define CONFIG_BOOTP_BOOTFILESIZE
49 #define CONFIG_BOOTP_DNS
50 #define CONFIG_BOOTP_DNS2
51 
52 #define CONFIG_HOSTNAME	CONFIG_BOARD_NAME
53 #define CONFIG_ROOTPATH	"/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
54 
55 /*
56  * U-Boot Commands
57  */
58 #define CONFIG_CMD_BSP		/* Board Specific functions	*/
59 #define CONFIG_CMD_DATE
60 #define CONFIG_CMD_EEPROM
61 #define CONFIG_CMD_IMX_FUSE	/* imx iim fuse                 */
62 #define CONFIG_CMD_MTDPARTS	/* MTD partition support	*/
63 #define CONFIG_CMD_NAND		/* NAND support			*/
64 #define CONFIG_CMD_NAND_LOCK_UNLOCK
65 #define CONFIG_CMD_NAND_TRIMFFS
66 #define CONFIG_CMD_UBIFS
67 
68 /*
69  * Memory configurations
70  */
71 #define CONFIG_NR_DRAM_POPULATED 1
72 #define CONFIG_NR_DRAM_BANKS	2
73 
74 #define ACFG_SDRAM_MBYTE_SYZE 64
75 
76 #define PHYS_SDRAM_1			0xA0000000
77 #define PHYS_SDRAM_2			0xB0000000
78 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
79 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (512<<10))
80 #define CONFIG_SYS_MEMTEST_START	0xA0000000	/* memtest test area  */
81 #define CONFIG_SYS_MEMTEST_END		0xA0300000	/* 3 MiB RAM test */
82 
83 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE	\
84 		+ PHYS_SDRAM_1_SIZE - 0x0100000)
85 
86 #define CONFIG_SYS_TEXT_BASE		0xA0000800
87 
88 /*
89  * FLASH organization
90  */
91 #define	ACFG_MONITOR_OFFSET		0x00000000
92 #define	CONFIG_SYS_MONITOR_LEN		0x00100000	/* 1MiB */
93 #define CONFIG_ENV_IS_IN_NAND
94 #define	CONFIG_ENV_OVERWRITE
95 #define	CONFIG_ENV_OFFSET		0x00100000	/* NAND offset */
96 #define	CONFIG_ENV_SIZE			0x00020000	/* 128kB  */
97 #define CONFIG_ENV_RANGE		0X00080000	/* 512kB */
98 #define	CONFIG_ENV_OFFSET_REDUND	\
99 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)	/* +512kB */
100 #define	CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE	/* 512kB */
101 #define	CONFIG_FIRMWARE_OFFSET		0x00200000
102 #define	CONFIG_FIRMWARE_SIZE		0x00080000	/* 512kB  */
103 #define	CONFIG_KERNEL_OFFSET		0x00300000
104 #define	CONFIG_ROOTFS_OFFSET		0x00800000
105 
106 #define CONFIG_MTDMAP			"mxc_nand.0"
107 #define MTDIDS_DEFAULT			"nand0=" CONFIG_MTDMAP
108 #define MTDPARTS_DEFAULT	"mtdparts=" CONFIG_MTDMAP \
109 				":1M(u-boot)ro," \
110 				"512K(env)," \
111 				"512K(env2)," \
112 				"512K(firmware)," \
113 				"512K(dtb)," \
114 				"5M(kernel)," \
115 				"-(rootfs)"
116 
117 /*
118  * U-Boot general configurations
119  */
120 #define CONFIG_SYS_LONGHELP
121 #define CONFIG_SYS_CBSIZE		2048		/* console I/O buffer */
122 #define CONFIG_SYS_PBSIZE		\
123 				(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
124 						/* Print buffer size */
125 #define CONFIG_SYS_MAXARGS		16		/* max command args */
126 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
127 						/* Boot argument buffer size */
128 #define CONFIG_AUTO_COMPLETE
129 #define CONFIG_CMDLINE_EDITING
130 #define CONFIG_ENV_VARS_UBOOT_CONFIG
131 #define CONFIG_PREBOOT			"run check_flash check_env;"
132 
133 /*
134  * Boot Linux
135  */
136 #define CONFIG_CMDLINE_TAG		/* send commandline to Kernel	*/
137 #define CONFIG_SETUP_MEMORY_TAGS	/* send memory definition to kernel */
138 #define CONFIG_INITRD_TAG		/* send initrd params	*/
139 
140 #define	CONFIG_BOOTFILE		__stringify(CONFIG_BOARD_NAME) "-linux.bin"
141 #define CONFIG_BOOTARGS		"console=" __stringify(ACFG_CONSOLE_DEV) "," \
142 			__stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \
143 			" ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs "
144 
145 #define ACFG_CONSOLE_DEV	ttySMX0
146 #define CONFIG_BOOTCOMMAND	"run ubifsboot"
147 #define CONFIG_SYS_AUTOLOAD	"no"
148 /*
149  * Default load address for user programs and kernel
150  */
151 #define CONFIG_LOADADDR			0xA0000000
152 #define	CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
153 
154 /*
155  * Extra Environments
156  */
157 #define CONFIG_EXTRA_ENV_SETTINGS \
158 	"env_version="		__stringify(CONFIG_ENV_VERSION)		"\0" \
159 	"consoledev="		__stringify(ACFG_CONSOLE_DEV)		"\0" \
160 	"mtdparts="		MTDPARTS_DEFAULT			"\0" \
161 	"partition=nand0,6\0"						\
162 	"u-boot_addr="		__stringify(ACFG_MONITOR_OFFSET)	"\0" \
163 	"env_addr="		__stringify(CONFIG_ENV_OFFSET)		"\0" \
164 	"firmware_addr="	__stringify(CONFIG_FIRMWARE_OFFSET)	"\0" \
165 	"firmware_size="	__stringify(CONFIG_FIRMWARE_SIZE)	"\0" \
166 	"kernel_addr="		__stringify(CONFIG_KERNEL_OFFSET)	"\0" \
167 	"rootfs_addr="		__stringify(CONFIG_ROOTFS_OFFSET)	"\0" \
168 	"board_name="		__stringify(CONFIG_BOARD_NAME)		"\0" \
169 	"kernel_addr_r=A0000000\0" \
170 	"check_env=if test -n ${flash_env_version}; "			\
171 		"then env default env_version; "			\
172 		"else env set flash_env_version ${env_version}; env save; "\
173 		"fi; "							\
174 		"if itest ${flash_env_version} < ${env_version}; then " \
175 			"echo \"*** Warning - Environment version"	\
176 			" change suggests: run flash_reset_env; reset\"; "\
177 			"env default flash_reset_env; "\
178 		"fi; \0"						\
179 	"check_flash=nand lock; nand unlock ${env_addr}; \0"	\
180 	"flash_reset_env=env default -f -a; saveenv; run update_env;"	\
181 		"echo Flash environment variables erased!\0"		\
182 	"download_uboot=tftpboot ${loadaddr} ${board_name}"		\
183 		"-u-boot-with-spl.bin\0"				\
184 	"flash_uboot=nand unlock ${u-boot_addr} ;"			\
185 		"nand erase.part u-boot;"		\
186 		"if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\
187 			"then nand lock; nand unlock ${env_addr};"	\
188 				"echo Flashing of uboot succeed;"	\
189 			"else echo Flashing of uboot failed;"		\
190 		"fi; \0"						\
191 	"update_uboot=run download_uboot flash_uboot\0"			\
192 	"download_env=tftpboot ${loadaddr} ${board_name}"		\
193 		"-u-boot-env.txt\0"				\
194 	"flash_env=env import -t ${loadaddr}; env save; \0"		\
195 	"update_env=run download_env flash_env\0"			\
196 	"update_all=run update_env update_uboot\0"			\
197 	"unlock_regs=mw 10000008 0; mw 10020008 0\0"			\
198 
199 /*
200  * Serial Driver
201  */
202 #define CONFIG_MXC_UART
203 #define CONFIG_CONS_INDEX		1
204 #define CONFIG_BAUDRATE			115200
205 #define CONFIG_MXC_UART_BASE		UART1_BASE
206 
207 /*
208  * GPIO
209  */
210 #define CONFIG_MXC_GPIO
211 
212 /*
213  * NOR
214  */
215 
216 /*
217  * NAND
218  */
219 #define CONFIG_NAND_MXC
220 
221 #define CONFIG_MXC_NAND_REGS_BASE	0xD8000000
222 #define CONFIG_SYS_NAND_BASE		CONFIG_MXC_NAND_REGS_BASE
223 #define CONFIG_SYS_MAX_NAND_DEVICE	1
224 
225 #define CONFIG_MXC_NAND_HWECC
226 #define CONFIG_SYS_NAND_LARGEPAGE
227 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
228 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
229 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
230 #define CONFIG_SYS_NAND_PAGE_COUNT	CONFIG_SYS_NAND_BLOCK_SIZE / \
231 						CONFIG_SYS_NAND_PAGE_SIZE
232 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
233 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	11
234 #define NAND_MAX_CHIPS			1
235 
236 #define CONFIG_FLASH_SHOW_PROGRESS	45
237 #define CONFIG_SYS_NAND_QUIET		1
238 
239 /*
240  * Partitions & Filsystems
241  */
242 #define CONFIG_MTD_DEVICE
243 #define CONFIG_MTD_PARTITIONS
244 #define CONFIG_DOS_PARTITION
245 #define CONFIG_SUPPORT_VFAT
246 
247 /*
248  * UBIFS
249  */
250 #define CONFIG_RBTREE
251 #define CONFIG_LZO
252 
253 /*
254  * Ethernet (on SOC imx FEC)
255  */
256 #define CONFIG_FEC_MXC
257 #define CONFIG_FEC_MXC_PHYADDR		0x1f
258 #define CONFIG_MII				/* MII PHY management	*/
259 
260 /*
261  * FPGA
262  */
263 #ifndef CONFIG_SPL_BUILD
264 #define CONFIG_FPGA
265 #endif
266 #define CONFIG_FPGA_COUNT		1
267 #define CONFIG_FPGA_XILINX
268 #define CONFIG_FPGA_SPARTAN3
269 #define CONFIG_SYS_FPGA_WAIT		250 /* 250 ms */
270 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
271 #define CONFIG_SYS_FPGA_CHECK_CTRLC
272 #define CONFIG_SYS_FPGA_CHECK_ERROR
273 
274 /*
275  * Fuses - IIM
276  */
277 #ifdef CONFIG_CMD_IMX_FUSE
278 #define IIM_MAC_BANK		0
279 #define IIM_MAC_ROW		5
280 #define IIM0_SCC_KEY		11
281 #define IIM1_SUID		1
282 #endif
283 
284 /*
285  * I2C
286  */
287 
288 #ifdef CONFIG_CMD_I2C
289 #define CONFIG_SYS_I2C
290 #define CONFIG_SYS_I2C_MXC
291 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
292 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
293 #define CONFIG_SYS_MXC_I2C1_SPEED	100000	/* 100 kHz */
294 #define CONFIG_SYS_MXC_I2C1_SLAVE	0x7F
295 #define CONFIG_SYS_MXC_I2C2_SPEED	100000	/* 100 kHz */
296 #define CONFIG_SYS_MXC_I2C2_SLAVE	0x7F
297 #define CONFIG_SYS_I2C_NOPROBES		{ }
298 
299 #ifdef CONFIG_CMD_EEPROM
300 # define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24LC02 */
301 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address */
302 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
303 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* msec */
304 #endif /* CONFIG_CMD_EEPROM */
305 #endif /* CONFIG_CMD_I2C */
306 
307 /*
308  * SD/MMC
309  */
310 #ifdef CONFIG_CMD_MMC
311 #define CONFIG_MMC
312 #define CONFIG_GENERIC_MMC
313 #define CONFIG_MXC_MMC
314 #define CONFIG_MXC_MCI_REGS_BASE	0x10014000
315 #endif
316 
317 /*
318  * RTC
319  */
320 #ifdef CONFIG_CMD_DATE
321 #define CONFIG_RTC_DS1374
322 #define CONFIG_SYS_RTC_BUS_NUM		0
323 #endif /* CONFIG_CMD_DATE */
324 
325 /*
326  * PLL
327  *
328  *  31 | x  |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0
329  *     |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------|
330  */
331 #define CONFIG_MX27_CLK32		32768	/* 32768 or 32000 Hz crystal */
332 
333 #if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */
334 /* micron 64MB */
335 #define PHYS_SDRAM_1_SIZE			0x04000000 /* 64 MB */
336 #define PHYS_SDRAM_2_SIZE			0x04000000 /* 64 MB */
337 #endif
338 
339 #if (ACFG_SDRAM_MBYTE_SYZE == 128)
340 /* micron 128MB */
341 #define PHYS_SDRAM_1_SIZE			0x08000000 /* 128 MB */
342 #define PHYS_SDRAM_2_SIZE			0x08000000 /* 128 MB */
343 #endif
344 
345 #if (ACFG_SDRAM_MBYTE_SYZE == 256)
346 /* micron 256MB */
347 #define PHYS_SDRAM_1_SIZE			0x10000000 /* 256 MB */
348 #define PHYS_SDRAM_2_SIZE			0x10000000 /* 256 MB */
349 #endif
350 
351 #endif /* __CONFIG_H */
352