1 /* 2 * Copyright 2013-2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex Apalis iMX6 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "mx6_common.h" 13 14 #undef CONFIG_DISPLAY_BOARDINFO 15 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 16 17 #define CONFIG_MACH_TYPE 4886 18 19 #define CONFIG_SYS_GENERIC_BOARD 20 21 #include <asm/arch/imx-regs.h> 22 #include <asm/mach-imx/gpio.h> 23 24 #ifdef CONFIG_SPL 25 #include "imx6_spl.h" 26 #endif 27 28 #define CONFIG_CMDLINE_TAG 29 #define CONFIG_SETUP_MEMORY_TAGS 30 #define CONFIG_INITRD_TAG 31 #define CONFIG_REVISION_TAG 32 #define CONFIG_SERIAL_TAG 33 34 /* Size of malloc() pool */ 35 #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) 36 37 #define CONFIG_MISC_INIT_R 38 39 #define CONFIG_MXC_UART 40 #define CONFIG_MXC_UART_BASE UART1_BASE 41 42 /* Make the HW version stuff available in U-Boot env */ 43 #define CONFIG_VERSION_VARIABLE /* ver environment variable */ 44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 45 46 /* I2C Configs */ 47 #define CONFIG_SYS_I2C 48 #define CONFIG_SYS_I2C_MXC 49 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 50 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 51 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 52 #define CONFIG_SYS_I2C_SPEED 100000 53 54 /* OCOTP Configs */ 55 #ifdef CONFIG_CMD_FUSE 56 #define CONFIG_MXC_OCOTP 57 #endif 58 59 /* MMC Configs */ 60 #define CONFIG_FSL_ESDHC 61 #define CONFIG_FSL_USDHC 62 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 63 #define CONFIG_SYS_FSL_USDHC_NUM 3 64 65 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 66 #define CONFIG_BOUNCE_BUFFER 67 68 /* 69 * SATA Configs 70 */ 71 #ifdef CONFIG_CMD_SATA 72 #define CONFIG_SYS_SATA_MAX_DEVICE 1 73 #define CONFIG_DWC_AHSATA_PORT_ID 0 74 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 75 #define CONFIG_LBA48 76 #endif 77 78 /* Network */ 79 #define CONFIG_FEC_MXC 80 #define CONFIG_MII 81 #define IMX_FEC_BASE ENET_BASE_ADDR 82 #define CONFIG_FEC_XCV_TYPE RGMII 83 #define CONFIG_ETHPRIME "FEC" 84 #define CONFIG_FEC_MXC_PHYADDR 6 85 #define CONFIG_IP_DEFRAG 86 #define CONFIG_TFTP_BLOCKSIZE 4096 87 #define CONFIG_TFTP_TSIZE 88 89 /* USB Configs */ 90 /* Host */ 91 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 92 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 93 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 94 #define CONFIG_MXC_USB_FLAGS 0 95 /* Client */ 96 #define CONFIG_USBD_HS 97 98 #define CONFIG_USB_GADGET_MASS_STORAGE 99 /* USB DFU */ 100 #define CONFIG_DFU_MMC 101 102 /* Miscellaneous commands */ 103 104 /* Framebuffer and LCD */ 105 #define CONFIG_VIDEO_IPUV3 106 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 107 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 108 #define CONFIG_VIDEO_BMP_RLE8 109 #define CONFIG_SPLASH_SCREEN 110 #define CONFIG_SPLASH_SCREEN_ALIGN 111 #define CONFIG_BMP_16BPP 112 #define CONFIG_VIDEO_LOGO 113 #define CONFIG_VIDEO_BMP_LOGO 114 #define CONFIG_CONSOLE_MUX 115 #define CONFIG_IMX_HDMI 116 #define CONFIG_IMX_VIDEO_SKIP 117 118 /* allow to overwrite serial and ethaddr */ 119 #define CONFIG_ENV_OVERWRITE 120 121 /* Command definition */ 122 #undef CONFIG_CMD_LOADB 123 #undef CONFIG_CMD_LOADS 124 #undef CONFIG_CMD_NFS 125 #undef CONFIG_CMD_FLASH 126 127 #undef CONFIG_IPADDR 128 #define CONFIG_IPADDR 192.168.10.2 129 #define CONFIG_NETMASK 255.255.255.0 130 #undef CONFIG_SERVERIP 131 #define CONFIG_SERVERIP 192.168.10.1 132 133 #define CONFIG_LOADADDR 0x12000000 134 135 #ifdef CONFIG_CMD_SATA 136 #define CONFIG_DRIVE_SATA "sata " 137 #else 138 #define CONFIG_DRIVE_SATA 139 #endif 140 141 #ifdef CONFIG_CMD_MMC 142 #define CONFIG_DRIVE_MMC "mmc " 143 #else 144 #define CONFIG_DRIVE_MMC 145 #endif 146 147 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC 148 149 #define DFU_ALT_EMMC_INFO \ 150 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ 151 "boot part 0 1;" \ 152 "rootfs part 0 2;" \ 153 "uImage fat 0 1;" \ 154 "imx6q-colibri-eval-v3.dtb fat 0 1;" \ 155 "imx6q-colibri-cam-eval-v3.dtb fat 0 1" 156 157 #define EMMC_BOOTCMD \ 158 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ 159 "rootwait\0" \ 160 "emmcboot=run setup; " \ 161 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ 162 "${vidargs}; echo Booting from internal eMMC chip...; " \ 163 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ 164 "${boot_file} && run fdt_fixup && " \ 165 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 166 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ 167 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 168 169 #define MEM_LAYOUT_ENV_SETTINGS \ 170 "bootm_size=0x20000000\0" \ 171 "fdt_addr_r=0x12000000\0" \ 172 "fdt_high=0xffffffff\0" \ 173 "initrd_high=0xffffffff\0" \ 174 "kernel_addr_r=0x11000000\0" \ 175 "ramdisk_addr_r=0x12100000\0" 176 177 #define NFS_BOOTCMD \ 178 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ 179 "nfsboot=run setup; " \ 180 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ 181 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ 182 "run nfsdtbload; dhcp ${kernel_addr_r} " \ 183 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ 184 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ 185 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 186 187 #define SD_BOOTCMD \ 188 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ 189 "rootwait\0" \ 190 "sdboot=run setup; " \ 191 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ 192 "${vidargs}; echo Booting from SD card; " \ 193 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ 194 "${boot_file} && run fdt_fixup && " \ 195 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 196 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ 197 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 198 199 #define USB_BOOTCMD \ 200 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ 201 "rootwait\0" \ 202 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ 203 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ 204 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ 205 "${boot_file} && run fdt_fixup && " \ 206 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 207 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ 208 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 209 210 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0 211 #define FDT_FILE "imx6q-apalis-eval.dtb" 212 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb" 213 #else 214 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" 215 #endif 216 #define CONFIG_EXTRA_ENV_SETTINGS \ 217 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ 218 "run nfsboot ; echo ; echo nfsboot failed ; " \ 219 "usb start ;" \ 220 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ 221 "boot_file=uImage\0" \ 222 "console=ttymxc0\0" \ 223 "defargs=enable_wait_mode=off vmalloc=400M\0" \ 224 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ 225 EMMC_BOOTCMD \ 226 "fdt_file=" FDT_FILE "\0" \ 227 "fdt_fixup=;\0" \ 228 MEM_LAYOUT_ENV_SETTINGS \ 229 NFS_BOOTCMD \ 230 SD_BOOTCMD \ 231 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 232 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 233 "flash_eth.img && source ${loadaddr}\0" \ 234 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ 235 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 236 "source ${loadaddr}\0" \ 237 "setup=setenv setupargs fec_mac=${ethaddr} " \ 238 "consoleblank=0 no_console_suspend=1 console=tty1 " \ 239 "console=${console},${baudrate}n8\0 " \ 240 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 241 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ 242 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 243 "source ${loadaddr}\0" \ 244 "splashpos=m,m\0" \ 245 "vidargs=mxc_hdmi.only_cea=1 " \ 246 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \ 247 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \ 248 "fbmem=32M\0 " 249 250 /* Miscellaneous configurable options */ 251 #undef CONFIG_SYS_CBSIZE 252 #define CONFIG_SYS_CBSIZE 1024 253 #undef CONFIG_SYS_MAXARGS 254 #define CONFIG_SYS_MAXARGS 48 255 256 #define CONFIG_SYS_ALT_MEMTEST 257 #define CONFIG_SYS_MEMTEST_START 0x10000000 258 #define CONFIG_SYS_MEMTEST_END 0x10010000 259 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 260 261 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 262 263 /* Physical Memory Map */ 264 #define CONFIG_NR_DRAM_BANKS 1 265 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 266 267 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 268 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 269 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 270 271 #define CONFIG_SYS_INIT_SP_OFFSET \ 272 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 273 #define CONFIG_SYS_INIT_SP_ADDR \ 274 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 275 276 /* environment organization */ 277 278 #define CONFIG_ENV_SIZE (8 * 1024) 279 280 #if defined(CONFIG_ENV_IS_IN_MMC) 281 /* Environment in eMMC, before config block at the end of 1st "boot sector" */ 282 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ 283 CONFIG_TDX_CFG_BLOCK_OFFSET) 284 #define CONFIG_SYS_MMC_ENV_DEV 0 285 #define CONFIG_SYS_MMC_ENV_PART 1 286 #endif 287 288 #define CONFIG_OF_SYSTEM_SETUP 289 290 #define CONFIG_CMD_TIME 291 292 #endif /* __CONFIG_H */ 293