1 /* 2 * Copyright 2013-2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex Apalis iMX6 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "mx6_common.h" 13 14 #undef CONFIG_DISPLAY_BOARDINFO 15 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ 16 17 #define CONFIG_MACH_TYPE 4886 18 19 #define CONFIG_SYS_GENERIC_BOARD 20 21 #include <asm/arch/imx-regs.h> 22 #include <asm/imx-common/gpio.h> 23 24 #ifdef CONFIG_SPL 25 #include "imx6_spl.h" 26 #define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */ 27 #endif 28 29 #define CONFIG_CMDLINE_TAG 30 #define CONFIG_SETUP_MEMORY_TAGS 31 #define CONFIG_INITRD_TAG 32 #define CONFIG_REVISION_TAG 33 #define CONFIG_SERIAL_TAG 34 35 /* Size of malloc() pool */ 36 #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) 37 38 #define CONFIG_MISC_INIT_R 39 40 #define CONFIG_MXC_UART 41 #define CONFIG_MXC_UART_BASE UART1_BASE 42 43 /* Make the HW version stuff available in U-Boot env */ 44 #define CONFIG_VERSION_VARIABLE /* ver environment variable */ 45 #define CONFIG_ENV_VARS_UBOOT_CONFIG 46 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 47 48 /* I2C Configs */ 49 #define CONFIG_SYS_I2C 50 #define CONFIG_SYS_I2C_MXC 51 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 52 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 53 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 54 #define CONFIG_SYS_I2C_SPEED 100000 55 56 /* OCOTP Configs */ 57 #ifdef CONFIG_CMD_FUSE 58 #define CONFIG_MXC_OCOTP 59 #endif 60 61 /* MMC Configs */ 62 #define CONFIG_FSL_ESDHC 63 #define CONFIG_FSL_USDHC 64 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 65 #define CONFIG_SYS_FSL_USDHC_NUM 3 66 67 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 68 #define CONFIG_BOUNCE_BUFFER 69 70 /* 71 * SATA Configs 72 */ 73 #ifdef CONFIG_CMD_SATA 74 #define CONFIG_DWC_AHSATA 75 #define CONFIG_SYS_SATA_MAX_DEVICE 1 76 #define CONFIG_DWC_AHSATA_PORT_ID 0 77 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 78 #define CONFIG_LBA48 79 #define CONFIG_LIBATA 80 #endif 81 82 /* Network */ 83 #define CONFIG_FEC_MXC 84 #define CONFIG_MII 85 #define IMX_FEC_BASE ENET_BASE_ADDR 86 #define CONFIG_FEC_XCV_TYPE RGMII 87 #define CONFIG_ETHPRIME "FEC" 88 #define CONFIG_FEC_MXC_PHYADDR 6 89 #define CONFIG_PHYLIB 90 #define CONFIG_PHY_MICREL 91 #define CONFIG_PHY_MICREL_KSZ9031 92 #define CONFIG_IP_DEFRAG 93 #define CONFIG_TFTP_BLOCKSIZE 4096 94 #define CONFIG_TFTP_TSIZE 95 96 /* USB Configs */ 97 /* Host */ 98 #define CONFIG_USB_HOST_ETHER 99 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 100 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ 101 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 102 #define CONFIG_MXC_USB_FLAGS 0 103 #define CONFIG_USB_KEYBOARD 104 #ifdef CONFIG_USB_KEYBOARD 105 #define CONFIG_SYS_USB_EVENT_POLL 106 #endif /* CONFIG_USB_KEYBOARD */ 107 /* Client */ 108 #define CONFIG_USB_GADGET_VBUS_DRAW 2 109 #define CONFIG_USBD_HS 110 111 #define CONFIG_USB_GADGET_MASS_STORAGE 112 #define CONFIG_USB_FUNCTION_MASS_STORAGE 113 #define CONFIG_G_DNL_MANUFACTURER "Toradex" 114 /* USB DFU */ 115 #define CONFIG_DFU_MMC 116 117 /* Miscellaneous commands */ 118 #define CONFIG_MXC_GPIO 119 120 /* Framebuffer and LCD */ 121 #define CONFIG_VIDEO_IPUV3 122 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 123 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 124 #define CONFIG_VIDEO_BMP_RLE8 125 #define CONFIG_SPLASH_SCREEN 126 #define CONFIG_SPLASH_SCREEN_ALIGN 127 #define CONFIG_BMP_16BPP 128 #define CONFIG_VIDEO_LOGO 129 #define CONFIG_VIDEO_BMP_LOGO 130 #define CONFIG_IPUV3_CLK 260000000 131 #define CONFIG_CONSOLE_MUX 132 #define CONFIG_IMX_HDMI 133 #define CONFIG_IMX_VIDEO_SKIP 134 135 /* allow to overwrite serial and ethaddr */ 136 #define CONFIG_ENV_OVERWRITE 137 #define CONFIG_CONS_INDEX 1 138 139 /* Command definition */ 140 #undef CONFIG_CMD_LOADB 141 #undef CONFIG_CMD_LOADS 142 #undef CONFIG_CMD_NFS 143 #undef CONFIG_CMD_FLASH 144 145 #undef CONFIG_IPADDR 146 #define CONFIG_IPADDR 192.168.10.2 147 #define CONFIG_NETMASK 255.255.255.0 148 #undef CONFIG_SERVERIP 149 #define CONFIG_SERVERIP 192.168.10.1 150 151 #define CONFIG_LOADADDR 0x12000000 152 #define CONFIG_SYS_TEXT_BASE 0x17800000 153 154 #ifdef CONFIG_CMD_SATA 155 #define CONFIG_DRIVE_SATA "sata " 156 #else 157 #define CONFIG_DRIVE_SATA 158 #endif 159 160 #ifdef CONFIG_CMD_MMC 161 #define CONFIG_DRIVE_MMC "mmc " 162 #else 163 #define CONFIG_DRIVE_MMC 164 #endif 165 166 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC 167 168 #define DFU_ALT_EMMC_INFO \ 169 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ 170 "boot part 0 1;" \ 171 "rootfs part 0 2;" \ 172 "uImage fat 0 1;" \ 173 "imx6q-colibri-eval-v3.dtb fat 0 1;" \ 174 "imx6q-colibri-cam-eval-v3.dtb fat 0 1" 175 176 #define EMMC_BOOTCMD \ 177 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ 178 "rootwait\0" \ 179 "emmcboot=run setup; " \ 180 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ 181 "${vidargs}; echo Booting from internal eMMC chip...; " \ 182 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ 183 "${boot_file} && run fdt_fixup && " \ 184 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 185 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ 186 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 187 188 #define MEM_LAYOUT_ENV_SETTINGS \ 189 "bootm_size=0x20000000\0" \ 190 "fdt_addr_r=0x12000000\0" \ 191 "fdt_high=0xffffffff\0" \ 192 "initrd_high=0xffffffff\0" \ 193 "kernel_addr_r=0x11000000\0" \ 194 "ramdisk_addr_r=0x12100000\0" 195 196 #define NFS_BOOTCMD \ 197 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ 198 "nfsboot=run setup; " \ 199 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ 200 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ 201 "run nfsdtbload; dhcp ${kernel_addr_r} " \ 202 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ 203 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ 204 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 205 206 #define SD_BOOTCMD \ 207 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ 208 "rootwait\0" \ 209 "sdboot=run setup; " \ 210 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ 211 "${vidargs}; echo Booting from SD card; " \ 212 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ 213 "${boot_file} && run fdt_fixup && " \ 214 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 215 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ 216 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 217 218 #define USB_BOOTCMD \ 219 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ 220 "rootwait\0" \ 221 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ 222 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ 223 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ 224 "${boot_file} && run fdt_fixup && " \ 225 "bootm ${kernel_addr_r} ${dtbparam}\0" \ 226 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ 227 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" 228 229 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0 230 #define FDT_FILE "imx6q-apalis-eval.dtb" 231 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb" 232 #else 233 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" 234 #endif 235 #define CONFIG_EXTRA_ENV_SETTINGS \ 236 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ 237 "run nfsboot ; echo ; echo nfsboot failed ; " \ 238 "usb start ;" \ 239 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ 240 "boot_file=uImage\0" \ 241 "console=ttymxc0\0" \ 242 "defargs=enable_wait_mode=off vmalloc=400M\0" \ 243 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ 244 EMMC_BOOTCMD \ 245 "fdt_file=" FDT_FILE "\0" \ 246 "fdt_fixup=;\0" \ 247 MEM_LAYOUT_ENV_SETTINGS \ 248 NFS_BOOTCMD \ 249 SD_BOOTCMD \ 250 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ 251 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ 252 "flash_eth.img && source ${loadaddr}\0" \ 253 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ 254 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 255 "source ${loadaddr}\0" \ 256 "setup=setenv setupargs fec_mac=${ethaddr} " \ 257 "consoleblank=0 no_console_suspend=1 console=tty1 " \ 258 "console=${console},${baudrate}n8\0 " \ 259 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ 260 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ 261 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ 262 "source ${loadaddr}\0" \ 263 "splashpos=m,m\0" \ 264 "vidargs=mxc_hdmi.only_cea=1 " \ 265 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \ 266 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \ 267 "fbmem=32M\0 " 268 269 /* Miscellaneous configurable options */ 270 #define CONFIG_SYS_LONGHELP 271 #define CONFIG_AUTO_COMPLETE 272 #undef CONFIG_SYS_CBSIZE 273 #define CONFIG_SYS_CBSIZE 1024 274 #undef CONFIG_SYS_MAXARGS 275 #define CONFIG_SYS_MAXARGS 48 276 277 #define CONFIG_SYS_ALT_MEMTEST 278 #define CONFIG_SYS_MEMTEST_START 0x10000000 279 #define CONFIG_SYS_MEMTEST_END 0x10010000 280 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 281 282 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 283 284 #define CONFIG_CMDLINE_EDITING 285 286 /* Physical Memory Map */ 287 #define CONFIG_NR_DRAM_BANKS 1 288 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 289 290 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 291 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 292 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 293 294 #define CONFIG_SYS_INIT_SP_OFFSET \ 295 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 296 #define CONFIG_SYS_INIT_SP_ADDR \ 297 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 298 299 /* environment organization */ 300 301 #define CONFIG_ENV_SIZE (8 * 1024) 302 303 #define CONFIG_ENV_IS_IN_MMC 304 305 #if defined(CONFIG_ENV_IS_IN_MMC) 306 /* Environment in eMMC, before config block at the end of 1st "boot sector" */ 307 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ 308 CONFIG_TDX_CFG_BLOCK_OFFSET) 309 #define CONFIG_SYS_MMC_ENV_DEV 0 310 #define CONFIG_SYS_MMC_ENV_PART 1 311 #endif 312 313 #define CONFIG_OF_SYSTEM_SETUP 314 315 #define CONFIG_CMD_TIME 316 317 #define CONFIG_SUPPORT_RAW_INITRD 318 319 #endif /* __CONFIG_H */ 320