xref: /openbmc/u-boot/include/configs/ap325rxa.h (revision 8c6407fc)
1 /*
2  * Configuation settings for the Renesas Solutions AP-325RXA board
3  *
4  * Copyright (C) 2008 Renesas Solutions Corp.
5  * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 #ifndef __AP325RXA_H
27 #define __AP325RXA_H
28 
29 #undef DEBUG
30 #define CONFIG_SH		1
31 #define CONFIG_SH4		1
32 #define CONFIG_CPU_SH7723	1
33 #define CONFIG_AP325RXA	1
34 
35 #define CONFIG_CMD_LOADB
36 #define CONFIG_CMD_LOADS
37 #define CONFIG_CMD_FLASH
38 #define CONFIG_CMD_MEMORY
39 #define CONFIG_CMD_NET
40 #define CONFIG_CMD_PING
41 #define CONFIG_CMD_NFS
42 #define CONFIG_CMD_SDRAM
43 #define CONFIG_CMD_SAVEENV
44 #define CONFIG_CMD_IDE
45 #define CONFIG_CMD_EXT2
46 #define CONFIG_DOS_PARTITION
47 
48 #define CONFIG_BAUDRATE		38400
49 #define CONFIG_BOOTDELAY	3
50 #define CONFIG_BOOTARGS		"console=ttySC2,38400"
51 
52 #define CONFIG_VERSION_VARIABLE
53 #undef  CONFIG_SHOW_BOOT_PROGRESS
54 
55 /* SMC9118 */
56 #define CONFIG_NET_MULTI
57 #define CONFIG_SMC911X 1
58 #define CONFIG_SMC911X_32_BIT 1
59 #define CONFIG_SMC911X_BASE 0xB6080000
60 
61 /* MEMORY */
62 #define AP325RXA_SDRAM_BASE		(0x88000000)
63 #define AP325RXA_FLASH_BASE_1		(0xA0000000)
64 #define AP325RXA_FLASH_BANK_SIZE	(128 * 1024 * 1024)
65 
66 #define CONFIG_SYS_TEXT_BASE	0x8FFC0000
67 
68 /* undef to save memory	*/
69 #define CONFIG_SYS_LONGHELP
70 /* Monitor Command Prompt */
71 #define CONFIG_SYS_PROMPT		"=> "
72 /* Buffer size for input from the Console */
73 #define CONFIG_SYS_CBSIZE		256
74 /* Buffer size for Console output */
75 #define CONFIG_SYS_PBSIZE		256
76 /* max args accepted for monitor commands */
77 #define CONFIG_SYS_MAXARGS		16
78 /* Buffer size for Boot Arguments passed to kernel */
79 #define CONFIG_SYS_BARGSIZE	512
80 /* List of legal baudrate settings for this board */
81 #define CONFIG_SYS_BAUDRATE_TABLE	{ 38400 }
82 
83 /* SCIF */
84 #define CONFIG_SCIF_CONSOLE 1
85 #define CONFIG_SCIF_A		1 /* SH7723 has SCIF and SCIFA */
86 #define CONFIG_CONS_SCIF5	1
87 
88 /* Suppress display of console information at boot */
89 #undef  CONFIG_SYS_CONSOLE_INFO_QUIET
90 #undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
91 #undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
92 
93 #define CONFIG_SYS_MEMTEST_START	(AP325RXA_SDRAM_BASE)
94 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
95 
96 /* Enable alternate, more extensive, memory test */
97 #undef  CONFIG_SYS_ALT_MEMTEST
98 /* Scratch address used by the alternate memory test */
99 #undef  CONFIG_SYS_MEMTEST_SCRATCH
100 
101 /* Enable temporary baudrate change while serial download */
102 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
103 
104 #define CONFIG_SYS_SDRAM_BASE	(AP325RXA_SDRAM_BASE)
105 /* maybe more, but if so u-boot doesn't know about it... */
106 #define CONFIG_SYS_SDRAM_SIZE	(128 * 1024 * 1024)
107 /* default load address for scripts ?!? */
108 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
109 
110 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
111 #define CONFIG_SYS_MONITOR_BASE	(AP325RXA_FLASH_BASE_1)
112 /* Monitor size */
113 #define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
114 /* Size of DRAM reserved for malloc() use */
115 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
116 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
117 
118 /* FLASH */
119 #define CONFIG_FLASH_CFI_DRIVER 1
120 #define CONFIG_SYS_FLASH_CFI
121 #undef  CONFIG_SYS_FLASH_QUIET_TEST
122 /* print 'E' for empty sector on flinfo */
123 #define CONFIG_SYS_FLASH_EMPTY_INFO
124 /* Physical start address of Flash memory */
125 #define CONFIG_SYS_FLASH_BASE	(AP325RXA_FLASH_BASE_1)
126 /* Max number of sectors on each Flash chip */
127 #define CONFIG_SYS_MAX_FLASH_SECT	512
128 
129 /*
130  * IDE support
131  */
132 #define CONFIG_IDE_RESET	1
133 #define CONFIG_SYS_PIO_MODE		1
134 #define CONFIG_SYS_IDE_MAXBUS		1	/* IDE bus */
135 #define CONFIG_SYS_IDE_MAXDEVICE	1
136 #define CONFIG_SYS_ATA_BASE_ADDR	0xB4180000
137 #define CONFIG_SYS_ATA_STRIDE		2	/* 1bit shift */
138 #define CONFIG_SYS_ATA_DATA_OFFSET	0x200	/* data reg offset */
139 #define CONFIG_SYS_ATA_REG_OFFSET	0x200	/* reg offset */
140 #define CONFIG_SYS_ATA_ALT_OFFSET	0x210	/* alternate register offset */
141 #define CONFIG_IDE_SWAP_IO
142 
143 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */
144 #define CONFIG_SYS_MAX_FLASH_BANKS	1
145 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
146 
147 /* Timeout for Flash erase operations (in ms) */
148 #define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
149 /* Timeout for Flash write operations (in ms) */
150 #define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
151 /* Timeout for Flash set sector lock bit operations (in ms) */
152 #define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
153 /* Timeout for Flash clear lock bit operations (in ms) */
154 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
155 
156 /*
157  * Use hardware flash sectors protection instead
158  * of U-Boot software protection
159  */
160 #undef  CONFIG_SYS_FLASH_PROTECTION
161 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
162 
163 /* ENV setting */
164 #define CONFIG_ENV_IS_IN_FLASH
165 #define CONFIG_ENV_OVERWRITE	1
166 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
167 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
168 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
169 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
170 #define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
171 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
172 
173 /* Board Clock */
174 #define CONFIG_SYS_CLK_FREQ	33333333
175 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
176 #define CONFIG_SYS_HZ		1000
177 
178 #endif	/* __AP325RXA_H */
179