1 /* 2 * Sysam AMCORE board configuration 3 * 4 * (C) Copyright 2016 Angelo Dureghello <angelo@sysam.it> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __AMCORE_CONFIG_H 10 #define __AMCORE_CONFIG_H 11 12 #define CONFIG_HOSTNAME AMCORE 13 14 #define CONFIG_MCFTMR 15 #define CONFIG_MCFUART 16 #define CONFIG_SYS_UART_PORT 0 17 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 18 19 #define CONFIG_BOOTCOMMAND "bootm ffc20000" 20 #define CONFIG_EXTRA_ENV_SETTINGS \ 21 "upgrade_uboot=loady; " \ 22 "protect off 0xffc00000 0xffc1ffff; " \ 23 "erase 0xffc00000 0xffc1ffff; " \ 24 "cp.b 0x20000 0xffc00000 ${filesize}\0" \ 25 "upgrade_kernel=loady; " \ 26 "erase 0xffc20000 0xffefffff; " \ 27 "cp.b 0x20000 0xffc20000 ${filesize}\0" \ 28 "upgrade_jffs2=loady; " \ 29 "erase 0xfff00000 0xffffffff; " \ 30 "cp.b 0x20000 0xfff00000 ${filesize}\0" 31 32 /* undef to save memory */ 33 #undef CONFIG_SYS_LONGHELP 34 35 #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ 36 #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ 37 38 #define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */ 39 40 #define CONFIG_SYS_MEMTEST_START 0x0 41 #define CONFIG_SYS_MEMTEST_END 0x1000000 42 43 #define CONFIG_SYS_HZ 1000 44 45 #define CONFIG_SYS_CLK 45000000 46 #define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2) 47 /* Register Base Addrs */ 48 #define CONFIG_SYS_MBAR 0x10000000 49 /* Definitions for initial stack pointer and data area (in DPRAM) */ 50 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 51 /* size of internal SRAM */ 52 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 53 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 54 GENERATED_GBL_DATA_SIZE) 55 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 56 57 #define CONFIG_SYS_SDRAM_BASE 0x00000000 58 #define CONFIG_SYS_SDRAM_SIZE 0x1000000 59 #define CONFIG_SYS_FLASH_BASE 0xffc00000 60 #define CONFIG_SYS_MAX_FLASH_BANKS 1 61 #define CONFIG_SYS_MAX_FLASH_SECT 1024 62 #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 63 64 #define CONFIG_SYS_FLASH_CFI 65 #define CONFIG_FLASH_CFI_DRIVER 66 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 67 /* amcore design has flash data bytes wired swapped */ 68 #define CONFIG_SYS_WRITE_SWAPPED_DATA 69 /* reserve 128-4KB */ 70 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 71 #define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024) 72 #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) 73 #define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) 74 75 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ 76 CONFIG_SYS_MONITOR_LEN) 77 #define CONFIG_ENV_SIZE 0x1000 78 #define CONFIG_ENV_SECT_SIZE 0x1000 79 80 #define LDS_BOARD_TEXT \ 81 . = DEFINED(env_offset) ? env_offset : .; \ 82 env/embedded.o(.text*); 83 84 /* memory map space for linux boot data */ 85 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) 86 87 /* 88 * Cache Configuration 89 * 90 * Special 8K version 3 core cache. 91 * This is a single unified instruction/data cache. 92 * sdram - single region - no masks 93 */ 94 #define CONFIG_SYS_CACHELINE_SIZE 16 95 96 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 97 CONFIG_SYS_INIT_RAM_SIZE - 8) 98 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 99 CONFIG_SYS_INIT_RAM_SIZE - 4) 100 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) 101 #define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \ 102 CF_ACR_EN) 103 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \ 104 CF_CACR_EC) 105 106 /* CS0 - AMD Flash, address 0xffc00000 */ 107 #define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16) 108 /* 4MB, AA=0,V=1 C/I BIT for errata */ 109 #define CONFIG_SYS_CS0_MASK 0x003f0001 110 /* WS=10, AA=1, PS=16bit (10) */ 111 #define CONFIG_SYS_CS0_CTRL 0x1980 112 /* CS1 - DM9000 Ethernet Controller, address 0x30000000 */ 113 #define CONFIG_SYS_CS1_BASE 0x3000 114 #define CONFIG_SYS_CS1_MASK 0x00070001 115 #define CONFIG_SYS_CS1_CTRL 0x0100 116 117 #endif /* __AMCORE_CONFIG_H */ 118 119