xref: /openbmc/u-boot/include/configs/amcore.h (revision 872cfa20)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Sysam AMCORE board configuration
4  *
5  * (C) Copyright 2016  Angelo Dureghello <angelo@sysam.it>
6  */
7 
8 #ifndef __AMCORE_CONFIG_H
9 #define __AMCORE_CONFIG_H
10 
11 #define CONFIG_HOSTNAME			"AMCORE"
12 
13 #define CONFIG_MCFTMR
14 #define CONFIG_MCFUART
15 #define CONFIG_SYS_UART_PORT		0
16 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
17 
18 #define CONFIG_BOOTCOMMAND		"bootm ffc20000"
19 #define CONFIG_EXTRA_ENV_SETTINGS				\
20 	"upgrade_uboot=loady; "					\
21 		"protect off 0xffc00000 0xffc1ffff; "		\
22 		"erase 0xffc00000 0xffc1ffff; "			\
23 		"cp.b 0x20000 0xffc00000 ${filesize}\0"		\
24 	"upgrade_kernel=loady; "				\
25 		"erase 0xffc20000 0xffefffff; "			\
26 		"cp.b 0x20000 0xffc20000 ${filesize}\0"		\
27 	"upgrade_jffs2=loady; "					\
28 		"erase 0xfff00000 0xffffffff; "			\
29 		"cp.b 0x20000 0xfff00000 ${filesize}\0"
30 
31 /* undef to save memory	*/
32 
33 #define CONFIG_MX_CYCLIC		1 /* enable mdc/mwc commands	*/
34 
35 #define CONFIG_SYS_LOAD_ADDR		0x20000	/* default load address */
36 
37 #define CONFIG_SYS_MEMTEST_START	0x0
38 #define CONFIG_SYS_MEMTEST_END		0x1000000
39 
40 #define CONFIG_SYS_HZ			1000
41 
42 #define CONFIG_SYS_CLK			45000000
43 #define CONFIG_SYS_CPU_CLK		(CONFIG_SYS_CLK * 2)
44 /* Register Base Addrs */
45 #define CONFIG_SYS_MBAR			0x10000000
46 /* Definitions for initial stack pointer and data area (in DPRAM) */
47 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
48 /* size of internal SRAM */
49 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
50 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
51 					 GENERATED_GBL_DATA_SIZE)
52 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
53 
54 #define CONFIG_SYS_SDRAM_BASE		0x00000000
55 #define CONFIG_SYS_SDRAM_SIZE		0x1000000
56 #define CONFIG_SYS_FLASH_BASE		0xffc00000
57 #define CONFIG_SYS_MAX_FLASH_BANKS	1
58 #define CONFIG_SYS_MAX_FLASH_SECT	1024
59 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
60 
61 /* amcore design has flash data bytes wired swapped */
62 #define CONFIG_SYS_WRITE_SWAPPED_DATA
63 /* reserve 128-4KB */
64 #define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
65 #define CONFIG_SYS_MONITOR_LEN          ((128 - 4) * 1024)
66 #define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
67 #define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
68 
69 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
70 					 CONFIG_SYS_MONITOR_LEN)
71 #define CONFIG_ENV_SIZE			0x1000
72 #define CONFIG_ENV_SECT_SIZE		0x1000
73 
74 #define LDS_BOARD_TEXT \
75 	. = DEFINED(env_offset) ? env_offset : .; \
76 	env/embedded.o(.text*);
77 
78 /* memory map space for linux boot data */
79 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
80 
81 /*
82  * Cache Configuration
83  *
84  * Special 8K version 3 core cache.
85  * This is a single unified instruction/data cache.
86  * sdram - single region - no masks
87  */
88 #define CONFIG_SYS_CACHELINE_SIZE	16
89 
90 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
91 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
92 #define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
93 					 CONFIG_SYS_INIT_RAM_SIZE - 4)
94 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
95 #define CONFIG_SYS_CACHE_ACR0		(CF_ACR_CM_WT | CF_ACR_SM_ALL | \
96 					 CF_ACR_EN)
97 #define CONFIG_SYS_CACHE_ICACR		(CF_CACR_DCM_P | CF_CACR_ESB | \
98 					 CF_CACR_EC)
99 
100 /* CS0 - AMD Flash, address 0xffc00000 */
101 #define	CONFIG_SYS_CS0_BASE		(CONFIG_SYS_FLASH_BASE>>16)
102 /* 4MB, AA=0,V=1  C/I BIT for errata */
103 #define	CONFIG_SYS_CS0_MASK		0x003f0001
104 /* WS=10, AA=1, PS=16bit (10) */
105 #define	CONFIG_SYS_CS0_CTRL		0x1980
106 /* CS1 - DM9000 Ethernet Controller, address 0x30000000 */
107 #define CONFIG_SYS_CS1_BASE		0x3000
108 #define CONFIG_SYS_CS1_MASK		0x00070001
109 #define CONFIG_SYS_CS1_CTRL		0x0100
110 
111 #endif  /* __AMCORE_CONFIG_H */
112 
113