1 /* 2 * am43xx_evm.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_AM43XX_EVM_H 10 #define __CONFIG_AM43XX_EVM_H 11 12 #define CONFIG_ARCH_CPU_INIT 13 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ 14 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 15 16 #include <asm/arch/omap.h> 17 18 /* NS16550 Configuration */ 19 #define CONFIG_SYS_NS16550_CLK 48000000 20 #if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL) 21 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 22 #define CONFIG_SYS_NS16550_SERIAL 23 #endif 24 25 /* I2C Configuration */ 26 #define CONFIG_ENV_EEPROM_IS_ON_I2C 27 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ 28 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 29 30 /* Power */ 31 #define CONFIG_POWER 32 #define CONFIG_POWER_I2C 33 #define CONFIG_POWER_TPS65218 34 #define CONFIG_POWER_TPS62362 35 36 /* SPL defines. */ 37 #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR 38 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 39 (128 << 20)) 40 41 /* Enabling L2 Cache */ 42 #define CONFIG_SYS_L2_PL310 43 #define CONFIG_SYS_PL310_BASE 0x48242000 44 45 /* 46 * Since SPL did pll and ddr initialization for us, 47 * we don't need to do it twice. 48 */ 49 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) 50 #define CONFIG_SKIP_LOWLEVEL_INIT 51 #endif 52 53 /* 54 * When building U-Boot such that there is no previous loader 55 * we need to call board_early_init_f. This is taken care of in 56 * s_init when we have SPL used. 57 */ 58 59 /* Now bring in the rest of the common code. */ 60 #include <configs/ti_armv7_omap.h> 61 62 /* Always 64 KiB env size */ 63 #define CONFIG_ENV_SIZE (64 << 10) 64 65 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 66 67 /* Clock Defines */ 68 #define V_OSCK 24000000 /* Clock output from T2 */ 69 #define V_SCLK (V_OSCK) 70 71 /* NS16550 Configuration */ 72 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ 73 74 #define FAT_ENV_INTERFACE "mmc" 75 #define FAT_ENV_DEVICE_AND_PART "0:1" 76 #define FAT_ENV_FILE "uboot.env" 77 78 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 79 80 /* SPL USB Support */ 81 82 #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) 83 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 84 #define CONFIG_USB_XHCI_OMAP 85 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 86 87 #define CONFIG_OMAP_USB_PHY 88 #define CONFIG_AM437X_USB2PHY2_HOST 89 #endif 90 91 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT) 92 #undef CONFIG_USB_DWC3_PHY_OMAP 93 #undef CONFIG_USB_DWC3_OMAP 94 #undef CONFIG_USB_DWC3 95 #undef CONFIG_USB_DWC3_GADGET 96 97 #undef CONFIG_USB_GADGET_DOWNLOAD 98 #undef CONFIG_USB_GADGET_VBUS_DRAW 99 #undef CONFIG_G_DNL_MANUFACTURER 100 #undef CONFIG_G_DNL_VENDOR_NUM 101 #undef CONFIG_G_DNL_PRODUCT_NUM 102 #undef CONFIG_USB_GADGET_DUALSPEED 103 #endif 104 105 /* 106 * Disable MMC DM for SPL build and can be re-enabled after adding 107 * DM support in SPL 108 */ 109 #ifdef CONFIG_SPL_BUILD 110 #undef CONFIG_TIMER 111 #endif 112 113 #ifndef CONFIG_SPL_BUILD 114 /* USB Device Firmware Update support */ 115 #define DFUARGS \ 116 "dfu_bufsiz=0x10000\0" \ 117 DFU_ALT_INFO_MMC \ 118 DFU_ALT_INFO_EMMC \ 119 DFU_ALT_INFO_RAM \ 120 DFU_ALT_INFO_QSPI_XIP 121 #else 122 #define DFUARGS 123 #endif 124 125 #ifdef CONFIG_QSPI_BOOT 126 #ifndef CONFIG_SYS_TEXT_BASE 127 #define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR 128 #endif 129 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 130 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 131 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 132 #define CONFIG_ENV_OFFSET 0x110000 133 #define CONFIG_ENV_OFFSET_REDUND 0x120000 134 #ifdef MTDIDS_DEFAULT 135 #undef MTDIDS_DEFAULT 136 #endif 137 #ifdef MTDPARTS_DEFAULT 138 #undef MTDPARTS_DEFAULT 139 #endif 140 #define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \ 141 "512k(QSPI.u-boot.backup)," \ 142 "512k(QSPI.u-boot-spl-os)," \ 143 "64k(QSPI.u-boot-env)," \ 144 "64k(QSPI.u-boot-env.backup)," \ 145 "8m(QSPI.kernel)," \ 146 "-(QSPI.file-system)" 147 #endif 148 149 /* SPI */ 150 #undef CONFIG_OMAP3_SPI 151 #define CONFIG_TI_SPI_MMAP 152 #define CONFIG_QSPI_SEL_GPIO 48 153 #define CONFIG_SF_DEFAULT_SPEED 48000000 154 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 155 #define CONFIG_QSPI_QUAD_SUPPORT 156 #define CONFIG_TI_EDMA3 157 158 #ifndef CONFIG_SPL_BUILD 159 #include <environment/ti/dfu.h> 160 #include <environment/ti/mmc.h> 161 162 #define CONFIG_EXTRA_ENV_SETTINGS \ 163 DEFAULT_LINUX_BOOT_ENV \ 164 DEFAULT_MMC_TI_ARGS \ 165 DEFAULT_FIT_TI_ARGS \ 166 "fdtfile=undefined\0" \ 167 "bootpart=0:2\0" \ 168 "bootdir=/boot\0" \ 169 "bootfile=zImage\0" \ 170 "console=ttyO0,115200n8\0" \ 171 "partitions=" \ 172 "uuid_disk=${uuid_gpt_disk};" \ 173 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 174 "optargs=\0" \ 175 "usbroot=/dev/sda2 rw\0" \ 176 "usbrootfstype=ext4 rootwait\0" \ 177 "usbdev=0\0" \ 178 "ramroot=/dev/ram0 rw\0" \ 179 "ramrootfstype=ext2\0" \ 180 "usbargs=setenv bootargs console=${console} " \ 181 "${optargs} " \ 182 "root=${usbroot} " \ 183 "rootfstype=${usbrootfstype}\0" \ 184 "ramargs=setenv bootargs console=${console} " \ 185 "${optargs} " \ 186 "root=${ramroot} " \ 187 "rootfstype=${ramrootfstype}\0" \ 188 "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ 189 "usbboot=" \ 190 "setenv devnum ${usbdev}; " \ 191 "setenv devtype usb; " \ 192 "usb start ${usbdev}; " \ 193 "if usb dev ${usbdev}; then " \ 194 "if run loadbootenv; then " \ 195 "echo Loaded environment from ${bootenv};" \ 196 "run importbootenv;" \ 197 "fi;" \ 198 "if test -n $uenvcmd; then " \ 199 "echo Running uenvcmd ...;" \ 200 "run uenvcmd;" \ 201 "fi;" \ 202 "if run loadimage; then " \ 203 "run loadfdt; " \ 204 "echo Booting from usb ${usbdev}...; " \ 205 "run usbargs;" \ 206 "bootz ${loadaddr} - ${fdtaddr}; " \ 207 "fi;" \ 208 "fi\0" \ 209 "fi;" \ 210 "usb stop ${usbdev};\0" \ 211 "findfdt="\ 212 "if test $board_name = AM43EPOS; then " \ 213 "setenv fdtfile am43x-epos-evm.dtb; fi; " \ 214 "if test $board_name = AM43__GP; then " \ 215 "setenv fdtfile am437x-gp-evm.dtb; fi; " \ 216 "if test $board_name = AM43XXHS; then " \ 217 "setenv fdtfile am437x-gp-evm.dtb; fi; " \ 218 "if test $board_name = AM43__SK; then " \ 219 "setenv fdtfile am437x-sk-evm.dtb; fi; " \ 220 "if test $board_name = AM43_IDK; then " \ 221 "setenv fdtfile am437x-idk-evm.dtb; fi; " \ 222 "if test $fdtfile = undefined; then " \ 223 "echo WARNING: Could not determine device tree; fi; \0" \ 224 NANDARGS \ 225 NETARGS \ 226 DFUARGS \ 227 228 #define CONFIG_BOOTCOMMAND \ 229 "if test ${boot_fit} -eq 1; then " \ 230 "run update_to_fit;" \ 231 "fi;" \ 232 "run findfdt; " \ 233 "run envboot;" \ 234 "run mmcboot;" \ 235 "run usbboot;" \ 236 NANDBOOT \ 237 238 #endif 239 240 #ifndef CONFIG_SPL_BUILD 241 /* CPSW Ethernet */ 242 #define CONFIG_MII 243 #define CONFIG_BOOTP_DEFAULT 244 #define CONFIG_BOOTP_DNS 245 #define CONFIG_BOOTP_DNS2 246 #define CONFIG_BOOTP_SEND_HOSTNAME 247 #define CONFIG_BOOTP_GATEWAY 248 #define CONFIG_BOOTP_SUBNETMASK 249 #define CONFIG_NET_RETRY_COUNT 10 250 #define CONFIG_PHY_GIGE 251 #endif 252 253 #define CONFIG_DRIVER_TI_CPSW 254 #define CONFIG_PHYLIB 255 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ 256 257 #define CONFIG_SYS_RX_ETH_BUFFER 64 258 259 /* NAND support */ 260 #ifdef CONFIG_NAND 261 /* NAND: device related configs */ 262 #define CONFIG_SYS_NAND_PAGE_SIZE 4096 263 #define CONFIG_SYS_NAND_OOBSIZE 224 264 #define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) 265 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 266 CONFIG_SYS_NAND_PAGE_SIZE) 267 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 268 /* NAND: driver related configs */ 269 #define CONFIG_NAND_OMAP_GPMC 270 #define CONFIG_NAND_OMAP_ELM 271 #define CONFIG_SYS_NAND_ONFI_DETECTION 272 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW 273 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 274 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 275 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 276 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ 277 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ 278 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ 279 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ 280 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ 281 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ 282 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ 283 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ 284 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ 285 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ 286 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ 287 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ 288 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ 289 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ 290 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ 291 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ 292 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ 293 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ 294 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ 295 } 296 #define CONFIG_SYS_NAND_ECCSIZE 512 297 #define CONFIG_SYS_NAND_ECCBYTES 26 298 #define MTDIDS_DEFAULT "nand0=nand.0" 299 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 300 "256k(NAND.SPL)," \ 301 "256k(NAND.SPL.backup1)," \ 302 "256k(NAND.SPL.backup2)," \ 303 "256k(NAND.SPL.backup3)," \ 304 "512k(NAND.u-boot-spl-os)," \ 305 "1m(NAND.u-boot)," \ 306 "256k(NAND.u-boot-env)," \ 307 "256k(NAND.u-boot-env.backup1)," \ 308 "7m(NAND.kernel)," \ 309 "-(NAND.file-system)" 310 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000 311 /* NAND: SPL related configs */ 312 #ifdef CONFIG_SPL_NAND_SUPPORT 313 #define CONFIG_SPL_NAND_AM33XX_BCH 314 #endif 315 /* NAND: SPL falcon mode configs */ 316 #ifdef CONFIG_SPL_OS_BOOT 317 #define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */ 318 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ 319 #define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 320 #endif 321 #define NANDARGS \ 322 "mtdids=" MTDIDS_DEFAULT "\0" \ 323 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 324 "nandargs=setenv bootargs console=${console} " \ 325 "${optargs} " \ 326 "root=${nandroot} " \ 327 "rootfstype=${nandrootfstype}\0" \ 328 "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ 329 "nandrootfstype=ubifs rootwait=1\0" \ 330 "nandboot=echo Booting from nand ...; " \ 331 "run nandargs; " \ 332 "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ 333 "nand read ${loadaddr} NAND.kernel; " \ 334 "bootz ${loadaddr} - ${fdtaddr}\0" 335 #define NANDBOOT "run nandboot; " 336 #else /* !CONFIG_NAND */ 337 #define NANDARGS 338 #define NANDBOOT 339 #endif /* CONFIG_NAND */ 340 341 #endif /* __CONFIG_AM43XX_EVM_H */ 342