1 /* 2 * am43xx_evm.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_AM43XX_EVM_H 10 #define __CONFIG_AM43XX_EVM_H 11 12 #define CONFIG_AM43XX 13 14 #define CONFIG_CMD_FAT 15 16 #define CONFIG_BOARD_LATE_INIT 17 #define CONFIG_ARCH_CPU_INIT 18 #define CONFIG_SYS_CACHELINE_SIZE 32 19 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ 20 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 21 22 #include <asm/arch/omap.h> 23 24 /* NS16550 Configuration */ 25 #define CONFIG_SYS_NS16550 26 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL) 27 #define CONFIG_SYS_NS16550_SERIAL 28 #define CONFIG_SYS_NS16550_CLK 48000000 29 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 30 #else 31 #define CONFIG_OMAP_SERIAL 32 #endif 33 34 /* I2C Configuration */ 35 #define CONFIG_CMD_EEPROM 36 #define CONFIG_ENV_EEPROM_IS_ON_I2C 37 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ 38 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 39 #define CONFIG_SYS_I2C_MULTI_EEPROMS 40 41 /* Power */ 42 #define CONFIG_POWER 43 #define CONFIG_POWER_I2C 44 #define CONFIG_POWER_TPS65218 45 #define CONFIG_POWER_TPS62362 46 47 /* SPL defines. */ 48 #ifdef CONFIG_SPL_USB_HOST_SUPPORT 49 /* 50 * For USB host boot, ROM uses DMA for copying MLO from USB storage 51 * and ARM internal ram is not accessible for DMA, so SPL text base 52 * should be in OCMC ram 53 */ 54 #define CONFIG_SPL_TEXT_BASE 0x40300350 55 #else 56 #define CONFIG_SPL_TEXT_BASE 0x402F4000 57 #endif 58 #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ 59 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 60 (128 << 20)) 61 #define CONFIG_SPL_POWER_SUPPORT 62 #define CONFIG_SPL_YMODEM_SUPPORT 63 64 /* Enabling L2 Cache */ 65 #define CONFIG_SYS_L2_PL310 66 #define CONFIG_SYS_PL310_BASE 0x48242000 67 #define CONFIG_SYS_CACHELINE_SIZE 32 68 69 /* 70 * Since SPL did pll and ddr initialization for us, 71 * we don't need to do it twice. 72 */ 73 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) 74 #define CONFIG_SKIP_LOWLEVEL_INIT 75 #endif 76 77 /* 78 * When building U-Boot such that there is no previous loader 79 * we need to call board_early_init_f. This is taken care of in 80 * s_init when we have SPL used. 81 */ 82 #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) 83 #define CONFIG_BOARD_EARLY_INIT_F 84 #endif 85 86 /* Now bring in the rest of the common code. */ 87 #include <configs/ti_armv7_omap.h> 88 89 /* Always 64 KiB env size */ 90 #define CONFIG_ENV_SIZE (64 << 10) 91 92 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 93 94 /* Clock Defines */ 95 #define V_OSCK 24000000 /* Clock output from T2 */ 96 #define V_SCLK (V_OSCK) 97 98 /* NS16550 Configuration */ 99 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ 100 101 #define CONFIG_ENV_IS_IN_FAT 102 #define FAT_ENV_INTERFACE "mmc" 103 #define FAT_ENV_DEVICE_AND_PART "0:1" 104 #define FAT_ENV_FILE "uboot.env" 105 #define CONFIG_FAT_WRITE 106 107 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 108 109 /* SPL USB Support */ 110 #ifdef CONFIG_SPL_USB_HOST_SUPPORT 111 #define CONFIG_SPL_USB_SUPPORT 112 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 113 114 #define CONFIG_CMD_USB 115 #define CONFIG_USB_HOST 116 #define CONFIG_USB_XHCI 117 #define CONFIG_USB_XHCI_DWC3 118 #define CONFIG_USB_XHCI_OMAP 119 #define CONFIG_USB_STORAGE 120 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 121 122 #define CONFIG_OMAP_USB_PHY 123 #define CONFIG_AM437X_USB2PHY2_HOST 124 #endif 125 126 /* USB GADGET */ 127 #if !defined(CONFIG_SPL_BUILD) || \ 128 (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)) 129 #define CONFIG_USB_DWC3_PHY_OMAP 130 #define CONFIG_USB_DWC3_OMAP 131 #define CONFIG_USB_DWC3 132 #define CONFIG_USB_DWC3_GADGET 133 134 #define CONFIG_USB_GADGET 135 #define CONFIG_USB_GADGET_DOWNLOAD 136 #define CONFIG_USB_GADGET_VBUS_DRAW 2 137 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" 138 #define CONFIG_G_DNL_VENDOR_NUM 0x0403 139 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 140 #define CONFIG_USB_GADGET_DUALSPEED 141 #endif 142 143 /* 144 * Disable MMC DM for SPL build and can be re-enabled after adding 145 * DM support in SPL 146 */ 147 #ifdef CONFIG_SPL_BUILD 148 #undef CONFIG_DM_MMC 149 #endif 150 151 #ifndef CONFIG_SPL_BUILD 152 /* USB Device Firmware Update support */ 153 #define CONFIG_USB_FUNCTION_DFU 154 #define CONFIG_DFU_RAM 155 #define CONFIG_CMD_DFU 156 157 #define CONFIG_DFU_MMC 158 #define DFU_ALT_INFO_MMC \ 159 "dfu_alt_info_mmc=" \ 160 "boot part 0 1;" \ 161 "rootfs part 0 2;" \ 162 "MLO fat 0 1;" \ 163 "spl-os-args fat 0 1;" \ 164 "spl-os-image fat 0 1;" \ 165 "u-boot.img fat 0 1;" \ 166 "uEnv.txt fat 0 1\0" 167 168 #define DFU_ALT_INFO_EMMC \ 169 "dfu_alt_info_emmc=" \ 170 "MLO raw 0x100 0x100 mmcpart 0;" \ 171 "u-boot.img raw 0x300 0x1000 mmcpart 0\0" 172 173 #define CONFIG_DFU_RAM 174 #define DFU_ALT_INFO_RAM \ 175 "dfu_alt_info_ram=" \ 176 "kernel ram 0x80200000 0x4000000;" \ 177 "fdt ram 0x80f80000 0x80000;" \ 178 "ramdisk ram 0x81000000 0x4000000\0" 179 180 #define DFUARGS \ 181 "dfu_bufsiz=0x10000\0" \ 182 DFU_ALT_INFO_MMC \ 183 DFU_ALT_INFO_EMMC \ 184 DFU_ALT_INFO_RAM 185 #else 186 #define DFUARGS 187 #endif 188 189 #ifdef CONFIG_QSPI_BOOT 190 #define CONFIG_SYS_TEXT_BASE 0x30000000 191 #undef CONFIG_ENV_IS_IN_FAT 192 #define CONFIG_ENV_IS_IN_SPI_FLASH 193 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 194 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 195 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 196 #define CONFIG_ENV_OFFSET 0x110000 197 #define CONFIG_ENV_OFFSET_REDUND 0x120000 198 #ifdef MTDIDS_DEFAULT 199 #undef MTDIDS_DEFAULT 200 #endif 201 #ifdef MTDPARTS_DEFAULT 202 #undef MTDPARTS_DEFAULT 203 #endif 204 #define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \ 205 "512k(QSPI.u-boot.backup)," \ 206 "512k(QSPI.u-boot-spl-os)," \ 207 "64k(QSPI.u-boot-env)," \ 208 "64k(QSPI.u-boot-env.backup)," \ 209 "8m(QSPI.kernel)," \ 210 "-(QSPI.file-system)" 211 #endif 212 213 /* SPI */ 214 #undef CONFIG_OMAP3_SPI 215 #define CONFIG_TI_QSPI 216 #define CONFIG_SPI_FLASH_MACRONIX 217 #define CONFIG_CMD_SF 218 #define CONFIG_CMD_SPI 219 #define CONFIG_TI_SPI_MMAP 220 #define CONFIG_QSPI_SEL_GPIO 48 221 #define CONFIG_SF_DEFAULT_SPEED 48000000 222 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 223 224 /* Enhance our eMMC support / experience. */ 225 #define CONFIG_CMD_GPT 226 #define CONFIG_EFI_PARTITION 227 228 #ifndef CONFIG_SPL_BUILD 229 #define CONFIG_EXTRA_ENV_SETTINGS \ 230 DEFAULT_LINUX_BOOT_ENV \ 231 DEFAULT_MMC_TI_ARGS \ 232 "fdtfile=undefined\0" \ 233 "bootpart=0:2\0" \ 234 "bootdir=/boot\0" \ 235 "bootfile=zImage\0" \ 236 "console=ttyO0,115200n8\0" \ 237 "partitions=" \ 238 "uuid_disk=${uuid_gpt_disk};" \ 239 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 240 "optargs=\0" \ 241 "usbroot=/dev/sda2 rw\0" \ 242 "usbrootfstype=ext4 rootwait\0" \ 243 "usbdev=0\0" \ 244 "ramroot=/dev/ram0 rw\0" \ 245 "ramrootfstype=ext2\0" \ 246 "usbargs=setenv bootargs console=${console} " \ 247 "${optargs} " \ 248 "root=${usbroot} " \ 249 "rootfstype=${usbrootfstype}\0" \ 250 "bootenv=uEnv.txt\0" \ 251 "loadbootenv=load ${devtype} ${devnum} ${loadaddr} ${bootenv}\0" \ 252 "importbootenv=echo Importing environment from mmc ...; " \ 253 "env import -t $loadaddr $filesize\0" \ 254 "ramargs=setenv bootargs console=${console} " \ 255 "${optargs} " \ 256 "root=${ramroot} " \ 257 "rootfstype=${ramrootfstype}\0" \ 258 "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ 259 "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 260 "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 261 "mmcboot=mmc dev ${mmcdev}; " \ 262 "setenv devnum ${mmcdev}; " \ 263 "setenv devtype mmc; " \ 264 "if mmc rescan; then " \ 265 "echo SD/MMC found on device ${devnum};" \ 266 "if run loadbootenv; then " \ 267 "echo Loaded environment from ${bootenv};" \ 268 "run importbootenv;" \ 269 "fi;" \ 270 "if test -n $uenvcmd; then " \ 271 "echo Running uenvcmd ...;" \ 272 "run uenvcmd;" \ 273 "fi;" \ 274 "if run loadimage; then " \ 275 "run loadfdt; " \ 276 "echo Booting from mmc${mmcdev} ...; " \ 277 "run args_mmc; " \ 278 "bootz ${loadaddr} - ${fdtaddr}; " \ 279 "fi;" \ 280 "fi;\0" \ 281 "usbboot=" \ 282 "setenv devnum ${usbdev}; " \ 283 "setenv devtype usb; " \ 284 "usb start ${usbdev}; " \ 285 "if usb dev ${usbdev}; then " \ 286 "if run loadbootenv; then " \ 287 "echo Loaded environment from ${bootenv};" \ 288 "run importbootenv;" \ 289 "fi;" \ 290 "if test -n $uenvcmd; then " \ 291 "echo Running uenvcmd ...;" \ 292 "run uenvcmd;" \ 293 "fi;" \ 294 "if run loadimage; then " \ 295 "run loadfdt; " \ 296 "echo Booting from usb ${usbdev}...; " \ 297 "run usbargs;" \ 298 "bootz ${loadaddr} - ${fdtaddr}; " \ 299 "fi;" \ 300 "fi\0" \ 301 "fi;" \ 302 "usb stop ${usbdev};\0" \ 303 "findfdt="\ 304 "if test $board_name = AM43EPOS; then " \ 305 "setenv fdtfile am43x-epos-evm.dtb; fi; " \ 306 "if test $board_name = AM43__GP; then " \ 307 "setenv fdtfile am437x-gp-evm.dtb; fi; " \ 308 "if test $board_name = AM43__SK; then " \ 309 "setenv fdtfile am437x-sk-evm.dtb; fi; " \ 310 "if test $board_name = AM43_IDK; then " \ 311 "setenv fdtfile am437x-idk-evm.dtb; fi; " \ 312 "if test $fdtfile = undefined; then " \ 313 "echo WARNING: Could not determine device tree; fi; \0" \ 314 NANDARGS \ 315 NETARGS \ 316 DFUARGS \ 317 318 #define CONFIG_BOOTCOMMAND \ 319 "run findfdt; " \ 320 "run mmcboot;" \ 321 "run usbboot;" \ 322 NANDBOOT \ 323 324 #endif 325 326 #ifndef CONFIG_SPL_BUILD 327 /* CPSW Ethernet */ 328 #define CONFIG_CMD_DHCP 329 #define CONFIG_CMD_PING 330 #define CONFIG_CMD_MII 331 #define CONFIG_MII 332 #define CONFIG_BOOTP_DEFAULT 333 #define CONFIG_BOOTP_DNS 334 #define CONFIG_BOOTP_DNS2 335 #define CONFIG_BOOTP_SEND_HOSTNAME 336 #define CONFIG_BOOTP_GATEWAY 337 #define CONFIG_BOOTP_SUBNETMASK 338 #define CONFIG_NET_RETRY_COUNT 10 339 #define CONFIG_PHY_GIGE 340 #endif 341 342 #define CONFIG_DRIVER_TI_CPSW 343 #define CONFIG_PHYLIB 344 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ 345 346 #define CONFIG_SPL_ENV_SUPPORT 347 #define CONFIG_SPL_NET_VCI_STRING "AM43xx U-Boot SPL" 348 349 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT) 350 #undef CONFIG_ENV_IS_IN_FAT 351 #define CONFIG_ENV_IS_NOWHERE 352 #define CONFIG_SPL_NET_SUPPORT 353 #endif 354 355 #define CONFIG_SYS_RX_ETH_BUFFER 64 356 357 /* NAND support */ 358 #ifdef CONFIG_NAND 359 /* NAND: device related configs */ 360 #define CONFIG_SYS_NAND_PAGE_SIZE 4096 361 #define CONFIG_SYS_NAND_OOBSIZE 224 362 #define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) 363 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 364 CONFIG_SYS_NAND_PAGE_SIZE) 365 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 366 /* NAND: driver related configs */ 367 #define CONFIG_NAND_OMAP_GPMC 368 #define CONFIG_NAND_OMAP_ELM 369 #define CONFIG_SYS_NAND_ONFI_DETECTION 370 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW 371 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 372 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 373 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 374 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ 375 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ 376 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ 377 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ 378 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ 379 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ 380 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ 381 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ 382 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ 383 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ 384 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ 385 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ 386 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ 387 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ 388 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ 389 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ 390 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ 391 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ 392 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ 393 } 394 #define CONFIG_SYS_NAND_ECCSIZE 512 395 #define CONFIG_SYS_NAND_ECCBYTES 26 396 #define MTDIDS_DEFAULT "nand0=nand.0" 397 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 398 "256k(NAND.SPL)," \ 399 "256k(NAND.SPL.backup1)," \ 400 "256k(NAND.SPL.backup2)," \ 401 "256k(NAND.SPL.backup3)," \ 402 "512k(NAND.u-boot-spl-os)," \ 403 "1m(NAND.u-boot)," \ 404 "256k(NAND.u-boot-env)," \ 405 "256k(NAND.u-boot-env.backup1)," \ 406 "7m(NAND.kernel)," \ 407 "-(NAND.file-system)" 408 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000 409 /* NAND: SPL related configs */ 410 #ifdef CONFIG_SPL_NAND_SUPPORT 411 #define CONFIG_SPL_NAND_AM33XX_BCH 412 #endif 413 /* NAND: SPL falcon mode configs */ 414 #ifdef CONFIG_SPL_OS_BOOT 415 #define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */ 416 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ 417 #define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 418 #endif 419 #define NANDARGS \ 420 "mtdids=" MTDIDS_DEFAULT "\0" \ 421 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 422 "nandargs=setenv bootargs console=${console} " \ 423 "${optargs} " \ 424 "root=${nandroot} " \ 425 "rootfstype=${nandrootfstype}\0" \ 426 "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ 427 "nandrootfstype=ubifs rootwait=1\0" \ 428 "nandboot=echo Booting from nand ...; " \ 429 "run nandargs; " \ 430 "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ 431 "nand read ${loadaddr} NAND.kernel; " \ 432 "bootz ${loadaddr} - ${fdtaddr}\0" 433 #define NANDBOOT "run nandboot; " 434 #else /* !CONFIG_NAND */ 435 #define NANDARGS 436 #define NANDBOOT 437 #endif /* CONFIG_NAND */ 438 439 #endif /* __CONFIG_AM43XX_EVM_H */ 440