1 /* 2 * am43xx_evm.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_AM43XX_EVM_H 10 #define __CONFIG_AM43XX_EVM_H 11 12 #define CONFIG_ARCH_CPU_INIT 13 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ 14 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 15 16 #include <asm/arch/omap.h> 17 18 /* NS16550 Configuration */ 19 #define CONFIG_SYS_NS16550_CLK 48000000 20 #if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL) 21 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 22 #define CONFIG_SYS_NS16550_SERIAL 23 #endif 24 25 /* I2C Configuration */ 26 #define CONFIG_CMD_EEPROM 27 #define CONFIG_ENV_EEPROM_IS_ON_I2C 28 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ 29 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 30 31 /* Power */ 32 #define CONFIG_POWER 33 #define CONFIG_POWER_I2C 34 #define CONFIG_POWER_TPS65218 35 #define CONFIG_POWER_TPS62362 36 37 /* SPL defines. */ 38 #define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR 39 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 40 (128 << 20)) 41 42 /* Enabling L2 Cache */ 43 #define CONFIG_SYS_L2_PL310 44 #define CONFIG_SYS_PL310_BASE 0x48242000 45 46 /* 47 * Since SPL did pll and ddr initialization for us, 48 * we don't need to do it twice. 49 */ 50 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) 51 #define CONFIG_SKIP_LOWLEVEL_INIT 52 #endif 53 54 /* 55 * When building U-Boot such that there is no previous loader 56 * we need to call board_early_init_f. This is taken care of in 57 * s_init when we have SPL used. 58 */ 59 60 /* Now bring in the rest of the common code. */ 61 #include <configs/ti_armv7_omap.h> 62 63 /* Always 64 KiB env size */ 64 #define CONFIG_ENV_SIZE (64 << 10) 65 66 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 67 68 /* Clock Defines */ 69 #define V_OSCK 24000000 /* Clock output from T2 */ 70 #define V_SCLK (V_OSCK) 71 72 /* NS16550 Configuration */ 73 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ 74 75 #define CONFIG_ENV_IS_IN_FAT 76 #define FAT_ENV_INTERFACE "mmc" 77 #define FAT_ENV_DEVICE_AND_PART "0:1" 78 #define FAT_ENV_FILE "uboot.env" 79 #define CONFIG_FAT_WRITE 80 81 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 82 83 /* SPL USB Support */ 84 85 #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) 86 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 87 #define CONFIG_USB_XHCI_OMAP 88 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 89 90 #define CONFIG_OMAP_USB_PHY 91 #define CONFIG_AM437X_USB2PHY2_HOST 92 #endif 93 94 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT) 95 #undef CONFIG_USB_DWC3_PHY_OMAP 96 #undef CONFIG_USB_DWC3_OMAP 97 #undef CONFIG_USB_DWC3 98 #undef CONFIG_USB_DWC3_GADGET 99 100 #undef CONFIG_USB_GADGET_DOWNLOAD 101 #undef CONFIG_USB_GADGET_VBUS_DRAW 102 #undef CONFIG_G_DNL_MANUFACTURER 103 #undef CONFIG_G_DNL_VENDOR_NUM 104 #undef CONFIG_G_DNL_PRODUCT_NUM 105 #undef CONFIG_USB_GADGET_DUALSPEED 106 #endif 107 108 /* 109 * Disable MMC DM for SPL build and can be re-enabled after adding 110 * DM support in SPL 111 */ 112 #ifdef CONFIG_SPL_BUILD 113 #undef CONFIG_TIMER 114 #endif 115 116 #ifndef CONFIG_SPL_BUILD 117 /* USB Device Firmware Update support */ 118 #define DFUARGS \ 119 "dfu_bufsiz=0x10000\0" \ 120 DFU_ALT_INFO_MMC \ 121 DFU_ALT_INFO_EMMC \ 122 DFU_ALT_INFO_RAM \ 123 DFU_ALT_INFO_QSPI_XIP 124 #else 125 #define DFUARGS 126 #endif 127 128 #ifdef CONFIG_QSPI_BOOT 129 #ifndef CONFIG_SYS_TEXT_BASE 130 #define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR 131 #endif 132 #undef CONFIG_ENV_IS_IN_FAT 133 #define CONFIG_ENV_IS_IN_SPI_FLASH 134 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 135 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 136 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 137 #define CONFIG_ENV_OFFSET 0x110000 138 #define CONFIG_ENV_OFFSET_REDUND 0x120000 139 #ifdef MTDIDS_DEFAULT 140 #undef MTDIDS_DEFAULT 141 #endif 142 #ifdef MTDPARTS_DEFAULT 143 #undef MTDPARTS_DEFAULT 144 #endif 145 #define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \ 146 "512k(QSPI.u-boot.backup)," \ 147 "512k(QSPI.u-boot-spl-os)," \ 148 "64k(QSPI.u-boot-env)," \ 149 "64k(QSPI.u-boot-env.backup)," \ 150 "8m(QSPI.kernel)," \ 151 "-(QSPI.file-system)" 152 #endif 153 154 /* SPI */ 155 #undef CONFIG_OMAP3_SPI 156 #define CONFIG_TI_SPI_MMAP 157 #define CONFIG_QSPI_SEL_GPIO 48 158 #define CONFIG_SF_DEFAULT_SPEED 48000000 159 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 160 #define CONFIG_QSPI_QUAD_SUPPORT 161 #define CONFIG_TI_EDMA3 162 163 #ifndef CONFIG_SPL_BUILD 164 #include <environment/ti/dfu.h> 165 #include <environment/ti/mmc.h> 166 167 #define CONFIG_EXTRA_ENV_SETTINGS \ 168 DEFAULT_LINUX_BOOT_ENV \ 169 DEFAULT_MMC_TI_ARGS \ 170 DEFAULT_FIT_TI_ARGS \ 171 "fdtfile=undefined\0" \ 172 "bootpart=0:2\0" \ 173 "bootdir=/boot\0" \ 174 "bootfile=zImage\0" \ 175 "console=ttyO0,115200n8\0" \ 176 "partitions=" \ 177 "uuid_disk=${uuid_gpt_disk};" \ 178 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 179 "optargs=\0" \ 180 "usbroot=/dev/sda2 rw\0" \ 181 "usbrootfstype=ext4 rootwait\0" \ 182 "usbdev=0\0" \ 183 "ramroot=/dev/ram0 rw\0" \ 184 "ramrootfstype=ext2\0" \ 185 "usbargs=setenv bootargs console=${console} " \ 186 "${optargs} " \ 187 "root=${usbroot} " \ 188 "rootfstype=${usbrootfstype}\0" \ 189 "ramargs=setenv bootargs console=${console} " \ 190 "${optargs} " \ 191 "root=${ramroot} " \ 192 "rootfstype=${ramrootfstype}\0" \ 193 "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ 194 "usbboot=" \ 195 "setenv devnum ${usbdev}; " \ 196 "setenv devtype usb; " \ 197 "usb start ${usbdev}; " \ 198 "if usb dev ${usbdev}; then " \ 199 "if run loadbootenv; then " \ 200 "echo Loaded environment from ${bootenv};" \ 201 "run importbootenv;" \ 202 "fi;" \ 203 "if test -n $uenvcmd; then " \ 204 "echo Running uenvcmd ...;" \ 205 "run uenvcmd;" \ 206 "fi;" \ 207 "if run loadimage; then " \ 208 "run loadfdt; " \ 209 "echo Booting from usb ${usbdev}...; " \ 210 "run usbargs;" \ 211 "bootz ${loadaddr} - ${fdtaddr}; " \ 212 "fi;" \ 213 "fi\0" \ 214 "fi;" \ 215 "usb stop ${usbdev};\0" \ 216 "findfdt="\ 217 "if test $board_name = AM43EPOS; then " \ 218 "setenv fdtfile am43x-epos-evm.dtb; fi; " \ 219 "if test $board_name = AM43__GP; then " \ 220 "setenv fdtfile am437x-gp-evm.dtb; fi; " \ 221 "if test $board_name = AM43XXHS; then " \ 222 "setenv fdtfile am437x-gp-evm.dtb; fi; " \ 223 "if test $board_name = AM43__SK; then " \ 224 "setenv fdtfile am437x-sk-evm.dtb; fi; " \ 225 "if test $board_name = AM43_IDK; then " \ 226 "setenv fdtfile am437x-idk-evm.dtb; fi; " \ 227 "if test $fdtfile = undefined; then " \ 228 "echo WARNING: Could not determine device tree; fi; \0" \ 229 NANDARGS \ 230 NETARGS \ 231 DFUARGS \ 232 233 #define CONFIG_BOOTCOMMAND \ 234 "if test ${boot_fit} -eq 1; then " \ 235 "run update_to_fit;" \ 236 "fi;" \ 237 "run findfdt; " \ 238 "run envboot;" \ 239 "run mmcboot;" \ 240 "run usbboot;" \ 241 NANDBOOT \ 242 243 #endif 244 245 #ifndef CONFIG_SPL_BUILD 246 /* CPSW Ethernet */ 247 #define CONFIG_MII 248 #define CONFIG_BOOTP_DEFAULT 249 #define CONFIG_BOOTP_DNS 250 #define CONFIG_BOOTP_DNS2 251 #define CONFIG_BOOTP_SEND_HOSTNAME 252 #define CONFIG_BOOTP_GATEWAY 253 #define CONFIG_BOOTP_SUBNETMASK 254 #define CONFIG_NET_RETRY_COUNT 10 255 #define CONFIG_PHY_GIGE 256 #endif 257 258 #define CONFIG_DRIVER_TI_CPSW 259 #define CONFIG_PHYLIB 260 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ 261 262 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT) 263 #undef CONFIG_ENV_IS_IN_FAT 264 #define CONFIG_ENV_IS_NOWHERE 265 #endif 266 267 #define CONFIG_SYS_RX_ETH_BUFFER 64 268 269 /* NAND support */ 270 #ifdef CONFIG_NAND 271 /* NAND: device related configs */ 272 #define CONFIG_SYS_NAND_PAGE_SIZE 4096 273 #define CONFIG_SYS_NAND_OOBSIZE 224 274 #define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) 275 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 276 CONFIG_SYS_NAND_PAGE_SIZE) 277 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 278 /* NAND: driver related configs */ 279 #define CONFIG_NAND_OMAP_GPMC 280 #define CONFIG_NAND_OMAP_ELM 281 #define CONFIG_SYS_NAND_ONFI_DETECTION 282 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW 283 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 284 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 285 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 286 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ 287 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ 288 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ 289 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ 290 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ 291 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ 292 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ 293 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ 294 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ 295 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ 296 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ 297 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ 298 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ 299 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ 300 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ 301 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ 302 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ 303 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ 304 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ 305 } 306 #define CONFIG_SYS_NAND_ECCSIZE 512 307 #define CONFIG_SYS_NAND_ECCBYTES 26 308 #define MTDIDS_DEFAULT "nand0=nand.0" 309 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 310 "256k(NAND.SPL)," \ 311 "256k(NAND.SPL.backup1)," \ 312 "256k(NAND.SPL.backup2)," \ 313 "256k(NAND.SPL.backup3)," \ 314 "512k(NAND.u-boot-spl-os)," \ 315 "1m(NAND.u-boot)," \ 316 "256k(NAND.u-boot-env)," \ 317 "256k(NAND.u-boot-env.backup1)," \ 318 "7m(NAND.kernel)," \ 319 "-(NAND.file-system)" 320 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000 321 /* NAND: SPL related configs */ 322 #ifdef CONFIG_SPL_NAND_SUPPORT 323 #define CONFIG_SPL_NAND_AM33XX_BCH 324 #endif 325 /* NAND: SPL falcon mode configs */ 326 #ifdef CONFIG_SPL_OS_BOOT 327 #define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */ 328 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ 329 #define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 330 #endif 331 #define NANDARGS \ 332 "mtdids=" MTDIDS_DEFAULT "\0" \ 333 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 334 "nandargs=setenv bootargs console=${console} " \ 335 "${optargs} " \ 336 "root=${nandroot} " \ 337 "rootfstype=${nandrootfstype}\0" \ 338 "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ 339 "nandrootfstype=ubifs rootwait=1\0" \ 340 "nandboot=echo Booting from nand ...; " \ 341 "run nandargs; " \ 342 "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ 343 "nand read ${loadaddr} NAND.kernel; " \ 344 "bootz ${loadaddr} - ${fdtaddr}\0" 345 #define NANDBOOT "run nandboot; " 346 #else /* !CONFIG_NAND */ 347 #define NANDARGS 348 #define NANDBOOT 349 #endif /* CONFIG_NAND */ 350 351 #endif /* __CONFIG_AM43XX_EVM_H */ 352