xref: /openbmc/u-boot/include/configs/am43xx_evm.h (revision 39245c86)
1 /*
2  * am43xx_evm.h
3  *
4  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_AM43XX_EVM_H
10 #define __CONFIG_AM43XX_EVM_H
11 
12 #define CONFIG_AM43XX
13 #define CONFIG_OMAP
14 #define CONFIG_OMAP_COMMON
15 
16 #include <asm/arch/omap.h>
17 
18 #define CONFIG_DMA_COHERENT
19 #define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
20 
21 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
22 #define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
23 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
24 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
25 #define CONFIG_SYS_PROMPT		"U-Boot# "
26 #define CONFIG_SYS_NO_FLASH
27 #define CONFIG_SYS_CACHELINE_SIZE 32
28 
29 #define CONFIG_OF_LIBFDT
30 #define CONFIG_CMD_BOOTZ
31 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
32 #define CONFIG_CMDLINE_EDITING
33 #define CONFIG_SETUP_MEMORY_TAGS
34 #define CONFIG_INITRD_TAG
35 
36 /* commands to include */
37 #include <config_cmd_default.h>
38 
39 #define CONFIG_CMD_ASKENV
40 #define CONFIG_VERSION_VARIABLE
41 
42 /* set to negative value for no autoboot */
43 #define CONFIG_BOOTDELAY		1
44 #define CONFIG_ENV_VARS_UBOOT_CONFIG
45 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
46 
47 /* Clock Defines */
48 #define V_OSCK				24000000  /* Clock output from T2 */
49 #define V_SCLK				(V_OSCK)
50 
51 #define CONFIG_CMD_ECHO
52 
53 /* max number of command args */
54 #define CONFIG_SYS_MAXARGS		64
55 
56 /* Console I/O Buffer Size */
57 #define CONFIG_SYS_CBSIZE		512
58 
59 /* Print Buffer Size */
60 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
61 					+ sizeof(CONFIG_SYS_PROMPT) + 16)
62 
63 /* Boot Argument Buffer Size */
64 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
65 
66  /* Physical Memory Map */
67 #define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
68 #define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
69 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
70 
71 #define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
72 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
73 						GENERATED_GBL_DATA_SIZE)
74 /* Platform/Board specific defs */
75 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
76 
77 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
78 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
79 
80 /* NS16550 Configuration */
81 #define CONFIG_SYS_NS16550
82 #define CONFIG_SYS_NS16550_SERIAL
83 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
84 #define CONFIG_SYS_NS16550_CLK		(48000000)
85 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
86 
87 #define CONFIG_BAUDRATE		115200
88 #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
89 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
90 
91 /* CPU */
92 #define CONFIG_ARCH_CPU_INIT
93 
94 #define CONFIG_ENV_OVERWRITE		1
95 #define CONFIG_SYS_CONSOLE_INFO_QUIET
96 
97 #define CONFIG_ENV_IS_NOWHERE
98 
99 /*
100  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
101  * 64 bytes before this address should be set aside for u-boot.img's
102  * header. That is 0x800FFFC0--0x80100000 should not be used for any
103  * other needs.
104  */
105 #define CONFIG_SYS_TEXT_BASE		0x80800000
106 
107 #ifndef	CONFIG_SPL_BUILD
108 #define CONFIG_SKIP_LOWLEVEL_INIT
109 #endif
110 
111 /* Defines for SPL */
112 #define CONFIG_SPL
113 #define CONFIG_SPL_FRAMEWORK
114 #define CONFIG_SPL_TEXT_BASE		0x402F0400
115 #define CONFIG_SPL_MAX_SIZE		(101 * 1024)
116 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
117 
118 #define CONFIG_SPL_BSS_START_ADDR	0x80a00000
119 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
120 
121 #define CONFIG_SPL_LIBCOMMON_SUPPORT
122 #define CONFIG_SPL_LIBDISK_SUPPORT
123 #define CONFIG_SPL_LIBGENERIC_SUPPORT
124 #define CONFIG_SPL_SERIAL_SUPPORT
125 #define CONFIG_SPL_YMODEM_SUPPORT
126 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
127 
128 #define CONFIG_SPL_BOARD_INIT
129 #define CONFIG_SYS_SPL_MALLOC_START	0x80a08000
130 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
131 
132 /* Unsupported features */
133 #undef CONFIG_USE_IRQ
134 
135 #define CONFIG_CMD_USB
136 #define CONFIG_USB_HOST
137 #define CONFIG_USB_XHCI
138 #define CONFIG_USB_XHCI_OMAP
139 #define CONFIG_USB_STORAGE
140 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
141 
142 #define CONFIG_OMAP_USB_PHY
143 #define CONFIG_AM437X_USB2PHY2_HOST
144 
145 #endif	/* __CONFIG_AM43XX_EVM_H */
146