1 /* 2 * am3517_evm.h - Default configuration for AM3517 EVM board. 3 * 4 * Author: Vaibhav Hiremath <hvaibhav@ti.com> 5 * 6 * Based on omap3_evm_config.h 7 * 8 * Copyright (C) 2010 Texas Instruments Incorporated 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25 #ifndef __CONFIG_H 26 #define __CONFIG_H 27 28 /* 29 * High Level Configuration Options 30 */ 31 #define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ 32 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 33 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 34 #define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */ 35 36 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 37 38 #include <asm/arch/cpu.h> /* get chip and board defs */ 39 #include <asm/arch/omap3.h> 40 41 /* 42 * Display CPU and Board information 43 */ 44 #define CONFIG_DISPLAY_CPUINFO 1 45 #define CONFIG_DISPLAY_BOARDINFO 1 46 47 /* Clock Defines */ 48 #define V_OSCK 26000000 /* Clock output from T2 */ 49 #define V_SCLK (V_OSCK >> 1) 50 51 #undef CONFIG_USE_IRQ /* no support for IRQs */ 52 #define CONFIG_MISC_INIT_R 53 54 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 55 #define CONFIG_SETUP_MEMORY_TAGS 1 56 #define CONFIG_INITRD_TAG 1 57 #define CONFIG_REVISION_TAG 1 58 59 /* 60 * Size of malloc() pool 61 */ 62 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 63 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 64 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ 65 /* initial data */ 66 /* 67 * DDR related 68 */ 69 #define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */ 70 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 71 72 /* 73 * Hardware drivers 74 */ 75 76 /* 77 * NS16550 Configuration 78 */ 79 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 80 81 #define CONFIG_SYS_NS16550 82 #define CONFIG_SYS_NS16550_SERIAL 83 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 84 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 85 86 /* 87 * select serial console configuration 88 */ 89 #define CONFIG_CONS_INDEX 3 90 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 91 #define CONFIG_SERIAL3 3 /* UART3 on AM3517 EVM */ 92 93 /* allow to overwrite serial and ethaddr */ 94 #define CONFIG_ENV_OVERWRITE 95 #define CONFIG_BAUDRATE 115200 96 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 97 115200} 98 #define CONFIG_MMC 1 99 #define CONFIG_OMAP3_MMC 1 100 #define CONFIG_DOS_PARTITION 1 101 102 /* 103 * USB configuration 104 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard 105 * Enable CONFIG_MUSB_UDC for Device functionalities. 106 */ 107 #define CONFIG_USB_AM35X 1 108 #define CONFIG_MUSB_HCD 1 109 110 #ifdef CONFIG_USB_AM35X 111 112 #ifdef CONFIG_MUSB_HCD 113 #define CONFIG_CMD_USB 114 115 #define CONFIG_USB_STORAGE 116 #define CONGIG_CMD_STORAGE 117 #define CONFIG_CMD_FAT 118 119 #ifdef CONFIG_USB_KEYBOARD 120 #define CONFIG_SYS_USB_EVENT_POLL 121 #define CONFIG_PREBOOT "usb start" 122 #endif /* CONFIG_USB_KEYBOARD */ 123 124 #endif /* CONFIG_MUSB_HCD */ 125 126 #ifdef CONFIG_MUSB_UDC 127 /* USB device configuration */ 128 #define CONFIG_USB_DEVICE 1 129 #define CONFIG_USB_TTY 1 130 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 131 /* Change these to suit your needs */ 132 #define CONFIG_USBD_VENDORID 0x0451 133 #define CONFIG_USBD_PRODUCTID 0x5678 134 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 135 #define CONFIG_USBD_PRODUCT_NAME "AM3517EVM" 136 #endif /* CONFIG_MUSB_UDC */ 137 138 #endif /* CONFIG_USB_AM35X */ 139 140 /* commands to include */ 141 #include <config_cmd_default.h> 142 143 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 144 #define CONFIG_CMD_FAT /* FAT support */ 145 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 146 147 #define CONFIG_CMD_I2C /* I2C serial bus support */ 148 #define CONFIG_CMD_MMC /* MMC support */ 149 #define CONFIG_CMD_NAND /* NAND support */ 150 #define CONFIG_CMD_DHCP 151 #define CONFIG_CMD_PING 152 153 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 154 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 155 #undef CONFIG_CMD_IMI /* iminfo */ 156 #undef CONFIG_CMD_IMLS /* List all found images */ 157 158 #define CONFIG_SYS_NO_FLASH 159 #define CONFIG_HARD_I2C 1 160 #define CONFIG_SYS_I2C_SPEED 100000 161 #define CONFIG_SYS_I2C_SLAVE 1 162 #define CONFIG_SYS_I2C_BUS 0 163 #define CONFIG_SYS_I2C_BUS_SELECT 1 164 #define CONFIG_DRIVER_OMAP34XX_I2C 1 165 166 #undef CONFIG_CMD_NET 167 /* 168 * Board NAND Info. 169 */ 170 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 171 /* to access nand */ 172 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 173 /* to access */ 174 /* nand at CS0 */ 175 176 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 177 /* NAND devices */ 178 #define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ 179 180 #define CONFIG_JFFS2_NAND 181 /* nand device jffs2 lives on */ 182 #define CONFIG_JFFS2_DEV "nand0" 183 /* start of jffs2 partition */ 184 #define CONFIG_JFFS2_PART_OFFSET 0x680000 185 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 186 187 /* Environment information */ 188 #define CONFIG_BOOTDELAY 10 189 190 #define CONFIG_BOOTFILE uImage 191 192 #define CONFIG_EXTRA_ENV_SETTINGS \ 193 "loadaddr=0x82000000\0" \ 194 "console=ttyS2,115200n8\0" \ 195 "mmcargs=setenv bootargs console=${console} " \ 196 "root=/dev/mmcblk0p2 rw " \ 197 "rootfstype=ext3 rootwait\0" \ 198 "nandargs=setenv bootargs console=${console} " \ 199 "root=/dev/mtdblock4 rw " \ 200 "rootfstype=jffs2\0" \ 201 "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ 202 "bootscript=echo Running bootscript from mmc ...; " \ 203 "source ${loadaddr}\0" \ 204 "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ 205 "mmcboot=echo Booting from mmc ...; " \ 206 "run mmcargs; " \ 207 "bootm ${loadaddr}\0" \ 208 "nandboot=echo Booting from nand ...; " \ 209 "run nandargs; " \ 210 "nand read ${loadaddr} 280000 400000; " \ 211 "bootm ${loadaddr}\0" \ 212 213 #define CONFIG_BOOTCOMMAND \ 214 "if mmc init; then " \ 215 "if run loadbootscript; then " \ 216 "run bootscript; " \ 217 "else " \ 218 "if run loaduimage; then " \ 219 "run mmcboot; " \ 220 "else run nandboot; " \ 221 "fi; " \ 222 "fi; " \ 223 "else run nandboot; fi" 224 225 #define CONFIG_AUTO_COMPLETE 1 226 /* 227 * Miscellaneous configurable options 228 */ 229 #define V_PROMPT "AM3517_EVM # " 230 231 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 232 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 233 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 234 #define CONFIG_SYS_PROMPT V_PROMPT 235 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 236 /* Print Buffer Size */ 237 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 238 sizeof(CONFIG_SYS_PROMPT) + 16) 239 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 240 /* args */ 241 /* Boot Argument Buffer Size */ 242 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 243 /* memtest works on */ 244 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 245 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 246 0x01F00000) /* 31MB */ 247 248 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 249 /* address */ 250 251 /* 252 * AM3517 has 12 GP timers, they can be driven by the system clock 253 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 254 * This rate is divided by a local divisor. 255 */ 256 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 257 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 258 #define CONFIG_SYS_HZ 1000 259 260 /*----------------------------------------------------------------------- 261 * Stack sizes 262 * 263 * The stack sizes are set up in start.S using the settings below 264 */ 265 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ 266 #ifdef CONFIG_USE_IRQ 267 #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ 268 #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ 269 #endif 270 271 /*----------------------------------------------------------------------- 272 * Physical Memory Map 273 */ 274 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 275 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 276 #define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ 277 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 278 279 /* SDRAM Bank Allocation method */ 280 #define SDRC_R_B_C 1 281 282 /*----------------------------------------------------------------------- 283 * FLASH and environment organization 284 */ 285 286 /* **** PISMO SUPPORT *** */ 287 288 /* Configure the PISMO */ 289 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 290 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 291 292 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 293 /* on one chip */ 294 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 295 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 296 297 #define CONFIG_SYS_FLASH_BASE boot_flash_base 298 299 /* Monitor at start of flash */ 300 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 301 302 #define CONFIG_NAND_OMAP_GPMC 303 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 304 #define CONFIG_ENV_IS_IN_NAND 1 305 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 306 307 #define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec 308 #define CONFIG_ENV_OFFSET boot_flash_off 309 #define CONFIG_ENV_ADDR boot_flash_env_addr 310 311 /*----------------------------------------------------------------------- 312 * CFI FLASH driver setup 313 */ 314 /* timeout values are in ticks */ 315 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 316 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 317 318 /* Flash banks JFFS2 should use */ 319 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 320 CONFIG_SYS_MAX_NAND_DEVICE) 321 #define CONFIG_SYS_JFFS2_MEM_NAND 322 /* use flash_info[2] */ 323 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 324 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 325 326 #ifndef __ASSEMBLY__ 327 extern unsigned int boot_flash_base; 328 extern volatile unsigned int boot_flash_env_addr; 329 extern unsigned int boot_flash_off; 330 extern unsigned int boot_flash_sec; 331 extern unsigned int boot_flash_type; 332 #endif 333 334 #endif /* __CONFIG_H */ 335