1 /* 2 * am3517_crane.h - Default configuration for AM3517 CraneBoard. 3 * 4 * Author: Srinath.R <srinath@mistralsolutions.com> 5 * 6 * Based on include/configs/am3517evm.h 7 * 8 * Copyright (C) 2011 Mistral Solutions pvt Ltd 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 23 */ 24 25 #ifndef __CONFIG_H 26 #define __CONFIG_H 27 28 /* 29 * High Level Configuration Options 30 */ 31 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 32 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 33 #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ 34 35 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 36 37 #include <asm/arch/cpu.h> /* get chip and board defs */ 38 #include <asm/arch/omap3.h> 39 40 /* 41 * Display CPU and Board information 42 */ 43 #define CONFIG_DISPLAY_CPUINFO 1 44 #define CONFIG_DISPLAY_BOARDINFO 1 45 46 /* Clock Defines */ 47 #define V_OSCK 26000000 /* Clock output from T2 */ 48 #define V_SCLK (V_OSCK >> 1) 49 50 #define CONFIG_MISC_INIT_R 51 52 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 53 #define CONFIG_SETUP_MEMORY_TAGS 1 54 #define CONFIG_INITRD_TAG 1 55 #define CONFIG_REVISION_TAG 1 56 57 /* 58 * Size of malloc() pool 59 */ 60 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 61 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 62 /* initial data */ 63 /* 64 * DDR related 65 */ 66 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 67 68 /* 69 * Hardware drivers 70 */ 71 72 /* 73 * NS16550 Configuration 74 */ 75 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 76 77 #define CONFIG_SYS_NS16550 78 #define CONFIG_SYS_NS16550_SERIAL 79 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 80 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 81 82 /* 83 * select serial console configuration 84 */ 85 #define CONFIG_CONS_INDEX 3 86 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 87 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ 88 89 /* allow to overwrite serial and ethaddr */ 90 #define CONFIG_ENV_OVERWRITE 91 #define CONFIG_BAUDRATE 115200 92 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 93 115200} 94 #define CONFIG_GENERIC_MMC 1 95 #define CONFIG_MMC 1 96 #define CONFIG_OMAP_HSMMC 1 97 #define CONFIG_DOS_PARTITION 1 98 99 /* 100 * USB configuration 101 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard 102 * Enable CONFIG_MUSB_UDC for Device functionalities. 103 */ 104 #define CONFIG_USB_AM35X 1 105 #define CONFIG_MUSB_HCD 1 106 107 #ifdef CONFIG_USB_AM35X 108 109 #ifdef CONFIG_MUSB_HCD 110 #define CONFIG_CMD_USB 111 112 #define CONFIG_USB_STORAGE 113 #define CONGIG_CMD_STORAGE 114 #define CONFIG_CMD_FAT 115 116 #ifdef CONFIG_USB_KEYBOARD 117 #define CONFIG_SYS_USB_EVENT_POLL 118 #define CONFIG_PREBOOT "usb start" 119 #endif /* CONFIG_USB_KEYBOARD */ 120 121 #endif /* CONFIG_MUSB_HCD */ 122 123 #ifdef CONFIG_MUSB_UDC 124 /* USB device configuration */ 125 #define CONFIG_USB_DEVICE 1 126 #define CONFIG_USB_TTY 1 127 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 128 /* Change these to suit your needs */ 129 #define CONFIG_USBD_VENDORID 0x0451 130 #define CONFIG_USBD_PRODUCTID 0x5678 131 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 132 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" 133 #endif /* CONFIG_MUSB_UDC */ 134 135 #endif /* CONFIG_USB_AM35X */ 136 137 /* commands to include */ 138 #include <config_cmd_default.h> 139 140 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 141 #define CONFIG_CMD_FAT /* FAT support */ 142 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 143 144 #define CONFIG_CMD_I2C /* I2C serial bus support */ 145 #define CONFIG_CMD_MMC /* MMC support */ 146 #define CONFIG_CMD_NAND /* NAND support */ 147 #define CONFIG_CMD_DHCP 148 #undef CONFIG_CMD_PING 149 150 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 151 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 152 #undef CONFIG_CMD_IMI /* iminfo */ 153 #undef CONFIG_CMD_IMLS /* List all found images */ 154 155 #define CONFIG_SYS_NO_FLASH 156 #define CONFIG_HARD_I2C 1 157 #define CONFIG_SYS_I2C_SPEED 100000 158 #define CONFIG_SYS_I2C_SLAVE 1 159 #define CONFIG_DRIVER_OMAP34XX_I2C 1 160 161 #undef CONFIG_CMD_NET 162 #undef CONFIG_CMD_NFS 163 /* 164 * Board NAND Info. 165 */ 166 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 167 /* to access nand */ 168 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 169 /* to access */ 170 /* nand at CS0 */ 171 172 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 173 /* NAND devices */ 174 175 #define CONFIG_JFFS2_NAND 176 /* nand device jffs2 lives on */ 177 #define CONFIG_JFFS2_DEV "nand0" 178 /* start of jffs2 partition */ 179 #define CONFIG_JFFS2_PART_OFFSET 0x680000 180 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 181 182 /* Environment information */ 183 #define CONFIG_BOOTDELAY 10 184 185 #define CONFIG_BOOTFILE "uImage" 186 187 #define CONFIG_EXTRA_ENV_SETTINGS \ 188 "loadaddr=0x82000000\0" \ 189 "console=ttyS2,115200n8\0" \ 190 "mmcdev=0\0" \ 191 "mmcargs=setenv bootargs console=${console} " \ 192 "root=/dev/mmcblk0p2 rw " \ 193 "rootfstype=ext3 rootwait\0" \ 194 "nandargs=setenv bootargs console=${console} " \ 195 "root=/dev/mtdblock4 rw " \ 196 "rootfstype=jffs2\0" \ 197 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 198 "bootscript=echo Running bootscript from mmc ...; " \ 199 "source ${loadaddr}\0" \ 200 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 201 "mmcboot=echo Booting from mmc ...; " \ 202 "run mmcargs; " \ 203 "bootm ${loadaddr}\0" \ 204 "nandboot=echo Booting from nand ...; " \ 205 "run nandargs; " \ 206 "nand read ${loadaddr} 280000 400000; " \ 207 "bootm ${loadaddr}\0" \ 208 209 #define CONFIG_BOOTCOMMAND \ 210 "mmc dev ${mmcdev}; if mmc rescan; then " \ 211 "if run loadbootscript; then " \ 212 "run bootscript; " \ 213 "else " \ 214 "if run loaduimage; then " \ 215 "run mmcboot; " \ 216 "else run nandboot; " \ 217 "fi; " \ 218 "fi; " \ 219 "else run nandboot; fi" 220 221 #define CONFIG_AUTO_COMPLETE 1 222 /* 223 * Miscellaneous configurable options 224 */ 225 #define V_PROMPT "AM3517_CRANE # " 226 227 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 228 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 229 #define CONFIG_SYS_PROMPT V_PROMPT 230 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 231 /* Print Buffer Size */ 232 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 233 sizeof(CONFIG_SYS_PROMPT) + 16) 234 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 235 /* args */ 236 /* Boot Argument Buffer Size */ 237 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 238 /* memtest works on */ 239 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 240 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 241 0x01F00000) /* 31MB */ 242 243 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 244 /* address */ 245 246 /* 247 * AM3517 has 12 GP timers, they can be driven by the system clock 248 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 249 * This rate is divided by a local divisor. 250 */ 251 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 252 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 253 #define CONFIG_SYS_HZ 1000 254 255 /*----------------------------------------------------------------------- 256 * Physical Memory Map 257 */ 258 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 259 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 260 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 261 262 /*----------------------------------------------------------------------- 263 * FLASH and environment organization 264 */ 265 266 /* **** PISMO SUPPORT *** */ 267 268 /* Configure the PISMO */ 269 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 270 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 271 272 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 273 /* on one chip */ 274 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 275 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 276 277 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 278 279 /* Monitor at start of flash */ 280 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 281 282 #define CONFIG_NAND_OMAP_GPMC 283 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 284 #define CONFIG_ENV_IS_IN_NAND 1 285 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 286 287 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ 288 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 289 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 290 291 /*----------------------------------------------------------------------- 292 * CFI FLASH driver setup 293 */ 294 /* timeout values are in ticks */ 295 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 296 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 297 298 /* Flash banks JFFS2 should use */ 299 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 300 CONFIG_SYS_MAX_NAND_DEVICE) 301 #define CONFIG_SYS_JFFS2_MEM_NAND 302 /* use flash_info[2] */ 303 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 304 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 305 306 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 307 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 308 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 309 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 310 CONFIG_SYS_INIT_RAM_SIZE - \ 311 GENERATED_GBL_DATA_SIZE) 312 313 /* Defines for SPL */ 314 #define CONFIG_SPL 315 #define CONFIG_SPL_FRAMEWORK 316 #define CONFIG_SPL_BOARD_INIT 317 #define CONFIG_SPL_NAND_SIMPLE 318 #define CONFIG_SPL_TEXT_BASE 0x40200800 319 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 320 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 321 322 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 323 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 324 325 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 326 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ 327 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 328 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" 329 330 #define CONFIG_SPL_LIBCOMMON_SUPPORT 331 #define CONFIG_SPL_LIBDISK_SUPPORT 332 #define CONFIG_SPL_I2C_SUPPORT 333 #define CONFIG_SPL_LIBGENERIC_SUPPORT 334 #define CONFIG_SPL_MMC_SUPPORT 335 #define CONFIG_SPL_FAT_SUPPORT 336 #define CONFIG_SPL_SERIAL_SUPPORT 337 #define CONFIG_SPL_NAND_SUPPORT 338 #define CONFIG_SPL_NAND_BASE 339 #define CONFIG_SPL_NAND_DRIVERS 340 #define CONFIG_SPL_NAND_ECC 341 #define CONFIG_SPL_POWER_SUPPORT 342 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 343 344 /* NAND boot config */ 345 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 346 #define CONFIG_SYS_NAND_PAGE_COUNT 64 347 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 348 #define CONFIG_SYS_NAND_OOBSIZE 64 349 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 350 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 351 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 352 10, 11, 12, 13} 353 #define CONFIG_SYS_NAND_ECCSIZE 512 354 #define CONFIG_SYS_NAND_ECCBYTES 3 355 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 356 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 357 358 /* 359 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 360 * 64 bytes before this address should be set aside for u-boot.img's 361 * header. That is 0x800FFFC0--0x80100000 should not be used for any 362 * other needs. 363 */ 364 #define CONFIG_SYS_TEXT_BASE 0x80100000 365 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 366 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 367 368 #endif /* __CONFIG_H */ 369