1 /* 2 * am3517_crane.h - Default configuration for AM3517 CraneBoard. 3 * 4 * Author: Srinath.R <srinath@mistralsolutions.com> 5 * 6 * Based on include/configs/am3517evm.h 7 * 8 * Copyright (C) 2011 Mistral Solutions pvt Ltd 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 20 21 #include <asm/arch/cpu.h> /* get chip and board defs */ 22 #include <asm/arch/omap.h> 23 24 /* Clock Defines */ 25 #define V_OSCK 26000000 /* Clock output from T2 */ 26 #define V_SCLK (V_OSCK >> 1) 27 28 #define CONFIG_MISC_INIT_R 29 30 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 31 #define CONFIG_SETUP_MEMORY_TAGS 1 32 #define CONFIG_INITRD_TAG 1 33 #define CONFIG_REVISION_TAG 1 34 35 /* 36 * Size of malloc() pool 37 */ 38 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 39 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 40 /* initial data */ 41 /* 42 * DDR related 43 */ 44 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 45 46 /* 47 * Hardware drivers 48 */ 49 50 /* 51 * NS16550 Configuration 52 */ 53 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 54 55 #define CONFIG_SYS_NS16550_SERIAL 56 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 57 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 58 59 /* 60 * select serial console configuration 61 */ 62 #define CONFIG_CONS_INDEX 3 63 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 64 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ 65 66 /* allow to overwrite serial and ethaddr */ 67 #define CONFIG_ENV_OVERWRITE 68 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 69 115200} 70 71 /* 72 * USB configuration 73 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard 74 * Enable CONFIG_USB_MUSB_UDC for Device functionalities. 75 */ 76 #define CONFIG_USB_AM35X 1 77 #define CONFIG_USB_MUSB_HCD 1 78 79 #ifdef CONFIG_USB_AM35X 80 81 #ifdef CONFIG_USB_MUSB_HCD 82 83 #ifdef CONFIG_USB_KEYBOARD 84 #define CONFIG_SYS_USB_EVENT_POLL 85 #define CONFIG_PREBOOT "usb start" 86 #endif /* CONFIG_USB_KEYBOARD */ 87 88 #endif /* CONFIG_USB_MUSB_HCD */ 89 90 #ifdef CONFIG_USB_MUSB_UDC 91 /* USB device configuration */ 92 #define CONFIG_USB_DEVICE 1 93 #define CONFIG_USB_TTY 1 94 /* Change these to suit your needs */ 95 #define CONFIG_USBD_VENDORID 0x0451 96 #define CONFIG_USBD_PRODUCTID 0x5678 97 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 98 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" 99 #endif /* CONFIG_USB_MUSB_UDC */ 100 101 #endif /* CONFIG_USB_AM35X */ 102 103 /* commands to include */ 104 105 #define CONFIG_CMD_NAND /* NAND support */ 106 107 #define CONFIG_SYS_I2C 108 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 109 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 110 #define CONFIG_SYS_I2C_OMAP34XX 111 112 /* 113 * Board NAND Info. 114 */ 115 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 116 /* to access nand */ 117 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 118 /* to access */ 119 /* nand at CS0 */ 120 121 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 122 /* NAND devices */ 123 124 #define CONFIG_JFFS2_NAND 125 /* nand device jffs2 lives on */ 126 #define CONFIG_JFFS2_DEV "nand0" 127 /* start of jffs2 partition */ 128 #define CONFIG_JFFS2_PART_OFFSET 0x680000 129 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 130 131 /* Environment information */ 132 133 #define CONFIG_BOOTFILE "uImage" 134 135 #define CONFIG_EXTRA_ENV_SETTINGS \ 136 "loadaddr=0x82000000\0" \ 137 "console=ttyS2,115200n8\0" \ 138 "mmcdev=0\0" \ 139 "mmcargs=setenv bootargs console=${console} " \ 140 "root=/dev/mmcblk0p2 rw " \ 141 "rootfstype=ext3 rootwait\0" \ 142 "nandargs=setenv bootargs console=${console} " \ 143 "root=/dev/mtdblock4 rw " \ 144 "rootfstype=jffs2\0" \ 145 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 146 "bootscript=echo Running bootscript from mmc ...; " \ 147 "source ${loadaddr}\0" \ 148 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 149 "mmcboot=echo Booting from mmc ...; " \ 150 "run mmcargs; " \ 151 "bootm ${loadaddr}\0" \ 152 "nandboot=echo Booting from nand ...; " \ 153 "run nandargs; " \ 154 "nand read ${loadaddr} 280000 400000; " \ 155 "bootm ${loadaddr}\0" \ 156 157 #define CONFIG_BOOTCOMMAND \ 158 "mmc dev ${mmcdev}; if mmc rescan; then " \ 159 "if run loadbootscript; then " \ 160 "run bootscript; " \ 161 "else " \ 162 "if run loaduimage; then " \ 163 "run mmcboot; " \ 164 "else run nandboot; " \ 165 "fi; " \ 166 "fi; " \ 167 "else run nandboot; fi" 168 169 #define CONFIG_AUTO_COMPLETE 1 170 /* 171 * Miscellaneous configurable options 172 */ 173 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 174 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 175 /* Print Buffer Size */ 176 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 177 sizeof(CONFIG_SYS_PROMPT) + 16) 178 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 179 /* args */ 180 /* Boot Argument Buffer Size */ 181 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 182 /* memtest works on */ 183 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 184 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 185 0x01F00000) /* 31MB */ 186 187 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 188 /* address */ 189 190 /* 191 * AM3517 has 12 GP timers, they can be driven by the system clock 192 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 193 * This rate is divided by a local divisor. 194 */ 195 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 196 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 197 198 /*----------------------------------------------------------------------- 199 * Physical Memory Map 200 */ 201 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 202 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 203 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 204 205 /*----------------------------------------------------------------------- 206 * FLASH and environment organization 207 */ 208 209 /* **** PISMO SUPPORT *** */ 210 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 211 /* on one chip */ 212 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 213 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 214 215 #define CONFIG_SYS_FLASH_BASE NAND_BASE 216 217 /* Monitor at start of flash */ 218 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 219 220 #define CONFIG_NAND_OMAP_GPMC 221 #define CONFIG_ENV_IS_IN_NAND 1 222 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 223 224 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ 225 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 226 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 227 228 /*----------------------------------------------------------------------- 229 * CFI FLASH driver setup 230 */ 231 /* timeout values are in ticks */ 232 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 233 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 234 235 /* Flash banks JFFS2 should use */ 236 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 237 CONFIG_SYS_MAX_NAND_DEVICE) 238 #define CONFIG_SYS_JFFS2_MEM_NAND 239 /* use flash_info[2] */ 240 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 241 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 242 243 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 244 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 245 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 246 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 247 CONFIG_SYS_INIT_RAM_SIZE - \ 248 GENERATED_GBL_DATA_SIZE) 249 250 /* Defines for SPL */ 251 #define CONFIG_SPL_FRAMEWORK 252 #define CONFIG_SPL_NAND_SIMPLE 253 #define CONFIG_SPL_TEXT_BASE 0x40200800 254 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 255 CONFIG_SPL_TEXT_BASE) 256 257 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 258 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 259 260 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 261 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 262 263 #define CONFIG_SPL_NAND_BASE 264 #define CONFIG_SPL_NAND_DRIVERS 265 #define CONFIG_SPL_NAND_ECC 266 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 267 268 /* NAND boot config */ 269 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 270 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 271 #define CONFIG_SYS_NAND_PAGE_COUNT 64 272 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 273 #define CONFIG_SYS_NAND_OOBSIZE 64 274 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 275 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 276 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 277 10, 11, 12, 13} 278 #define CONFIG_SYS_NAND_ECCSIZE 512 279 #define CONFIG_SYS_NAND_ECCBYTES 3 280 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 281 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 282 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 283 284 /* 285 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 286 * 64 bytes before this address should be set aside for u-boot.img's 287 * header. That is 0x800FFFC0--0x80100000 should not be used for any 288 * other needs. 289 */ 290 #define CONFIG_SYS_TEXT_BASE 0x80100000 291 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 292 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 293 294 #endif /* __CONFIG_H */ 295