1 /* 2 * am3517_crane.h - Default configuration for AM3517 CraneBoard. 3 * 4 * Author: Srinath.R <srinath@mistralsolutions.com> 5 * 6 * Based on include/configs/am3517evm.h 7 * 8 * Copyright (C) 2011 Mistral Solutions pvt Ltd 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 20 #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ 21 #define CONFIG_OMAP_COMMON 22 #define CONFIG_SYS_GENERIC_BOARD 23 /* Common ARM Erratas */ 24 #define CONFIG_ARM_ERRATA_454179 25 #define CONFIG_ARM_ERRATA_430973 26 #define CONFIG_ARM_ERRATA_621766 27 28 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 29 30 #include <asm/arch/cpu.h> /* get chip and board defs */ 31 #include <asm/arch/omap.h> 32 33 /* 34 * Display CPU and Board information 35 */ 36 #define CONFIG_DISPLAY_CPUINFO 1 37 #define CONFIG_DISPLAY_BOARDINFO 1 38 39 /* Clock Defines */ 40 #define V_OSCK 26000000 /* Clock output from T2 */ 41 #define V_SCLK (V_OSCK >> 1) 42 43 #define CONFIG_MISC_INIT_R 44 45 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 46 #define CONFIG_SETUP_MEMORY_TAGS 1 47 #define CONFIG_INITRD_TAG 1 48 #define CONFIG_REVISION_TAG 1 49 50 /* 51 * Size of malloc() pool 52 */ 53 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 54 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 55 /* initial data */ 56 /* 57 * DDR related 58 */ 59 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 60 61 /* 62 * Hardware drivers 63 */ 64 65 /* 66 * NS16550 Configuration 67 */ 68 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 69 70 #define CONFIG_SYS_NS16550 71 #define CONFIG_SYS_NS16550_SERIAL 72 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 73 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 74 75 /* 76 * select serial console configuration 77 */ 78 #define CONFIG_CONS_INDEX 3 79 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 80 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ 81 82 /* allow to overwrite serial and ethaddr */ 83 #define CONFIG_ENV_OVERWRITE 84 #define CONFIG_BAUDRATE 115200 85 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 86 115200} 87 #define CONFIG_GENERIC_MMC 1 88 #define CONFIG_MMC 1 89 #define CONFIG_OMAP_HSMMC 1 90 #define CONFIG_DOS_PARTITION 1 91 92 /* 93 * USB configuration 94 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard 95 * Enable CONFIG_MUSB_UDC for Device functionalities. 96 */ 97 #define CONFIG_USB_AM35X 1 98 #define CONFIG_MUSB_HCD 1 99 100 #ifdef CONFIG_USB_AM35X 101 102 #ifdef CONFIG_MUSB_HCD 103 #define CONFIG_CMD_USB 104 105 #define CONFIG_USB_STORAGE 106 #define CONGIG_CMD_STORAGE 107 #define CONFIG_CMD_FAT 108 109 #ifdef CONFIG_USB_KEYBOARD 110 #define CONFIG_SYS_USB_EVENT_POLL 111 #define CONFIG_PREBOOT "usb start" 112 #endif /* CONFIG_USB_KEYBOARD */ 113 114 #endif /* CONFIG_MUSB_HCD */ 115 116 #ifdef CONFIG_MUSB_UDC 117 /* USB device configuration */ 118 #define CONFIG_USB_DEVICE 1 119 #define CONFIG_USB_TTY 1 120 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 121 /* Change these to suit your needs */ 122 #define CONFIG_USBD_VENDORID 0x0451 123 #define CONFIG_USBD_PRODUCTID 0x5678 124 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 125 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" 126 #endif /* CONFIG_MUSB_UDC */ 127 128 #endif /* CONFIG_USB_AM35X */ 129 130 /* commands to include */ 131 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 132 #define CONFIG_CMD_FAT /* FAT support */ 133 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 134 135 #define CONFIG_CMD_I2C /* I2C serial bus support */ 136 #define CONFIG_CMD_MMC /* MMC support */ 137 #define CONFIG_CMD_NAND /* NAND support */ 138 #define CONFIG_CMD_DHCP 139 #undef CONFIG_CMD_PING 140 141 142 #define CONFIG_SYS_NO_FLASH 143 #define CONFIG_SYS_I2C 144 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 145 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 146 #define CONFIG_SYS_I2C_OMAP34XX 147 148 /* 149 * Board NAND Info. 150 */ 151 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 152 /* to access nand */ 153 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 154 /* to access */ 155 /* nand at CS0 */ 156 157 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 158 /* NAND devices */ 159 160 #define CONFIG_JFFS2_NAND 161 /* nand device jffs2 lives on */ 162 #define CONFIG_JFFS2_DEV "nand0" 163 /* start of jffs2 partition */ 164 #define CONFIG_JFFS2_PART_OFFSET 0x680000 165 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 166 167 /* Environment information */ 168 #define CONFIG_BOOTDELAY 10 169 170 #define CONFIG_BOOTFILE "uImage" 171 172 #define CONFIG_EXTRA_ENV_SETTINGS \ 173 "loadaddr=0x82000000\0" \ 174 "console=ttyS2,115200n8\0" \ 175 "mmcdev=0\0" \ 176 "mmcargs=setenv bootargs console=${console} " \ 177 "root=/dev/mmcblk0p2 rw " \ 178 "rootfstype=ext3 rootwait\0" \ 179 "nandargs=setenv bootargs console=${console} " \ 180 "root=/dev/mtdblock4 rw " \ 181 "rootfstype=jffs2\0" \ 182 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 183 "bootscript=echo Running bootscript from mmc ...; " \ 184 "source ${loadaddr}\0" \ 185 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 186 "mmcboot=echo Booting from mmc ...; " \ 187 "run mmcargs; " \ 188 "bootm ${loadaddr}\0" \ 189 "nandboot=echo Booting from nand ...; " \ 190 "run nandargs; " \ 191 "nand read ${loadaddr} 280000 400000; " \ 192 "bootm ${loadaddr}\0" \ 193 194 #define CONFIG_BOOTCOMMAND \ 195 "mmc dev ${mmcdev}; if mmc rescan; then " \ 196 "if run loadbootscript; then " \ 197 "run bootscript; " \ 198 "else " \ 199 "if run loaduimage; then " \ 200 "run mmcboot; " \ 201 "else run nandboot; " \ 202 "fi; " \ 203 "fi; " \ 204 "else run nandboot; fi" 205 206 #define CONFIG_AUTO_COMPLETE 1 207 /* 208 * Miscellaneous configurable options 209 */ 210 #define V_PROMPT "AM3517_CRANE # " 211 212 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 213 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 214 #define CONFIG_SYS_PROMPT V_PROMPT 215 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 216 /* Print Buffer Size */ 217 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 218 sizeof(CONFIG_SYS_PROMPT) + 16) 219 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 220 /* args */ 221 /* Boot Argument Buffer Size */ 222 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 223 /* memtest works on */ 224 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 225 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 226 0x01F00000) /* 31MB */ 227 228 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 229 /* address */ 230 231 /* 232 * AM3517 has 12 GP timers, they can be driven by the system clock 233 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 234 * This rate is divided by a local divisor. 235 */ 236 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 237 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 238 239 /*----------------------------------------------------------------------- 240 * Physical Memory Map 241 */ 242 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 243 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 244 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 245 246 /*----------------------------------------------------------------------- 247 * FLASH and environment organization 248 */ 249 250 /* **** PISMO SUPPORT *** */ 251 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 252 /* on one chip */ 253 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 254 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 255 256 #define CONFIG_SYS_FLASH_BASE NAND_BASE 257 258 /* Monitor at start of flash */ 259 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 260 261 #define CONFIG_NAND_OMAP_GPMC 262 #define CONFIG_ENV_IS_IN_NAND 1 263 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 264 265 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ 266 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 267 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 268 269 /*----------------------------------------------------------------------- 270 * CFI FLASH driver setup 271 */ 272 /* timeout values are in ticks */ 273 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 274 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 275 276 /* Flash banks JFFS2 should use */ 277 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 278 CONFIG_SYS_MAX_NAND_DEVICE) 279 #define CONFIG_SYS_JFFS2_MEM_NAND 280 /* use flash_info[2] */ 281 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 282 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 283 284 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 285 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 286 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 287 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 288 CONFIG_SYS_INIT_RAM_SIZE - \ 289 GENERATED_GBL_DATA_SIZE) 290 291 /* Defines for SPL */ 292 #define CONFIG_SPL_FRAMEWORK 293 #define CONFIG_SPL_BOARD_INIT 294 #define CONFIG_SPL_NAND_SIMPLE 295 #define CONFIG_SPL_TEXT_BASE 0x40200800 296 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 297 298 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 299 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 300 301 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 302 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ 303 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 304 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 305 306 #define CONFIG_SPL_LIBCOMMON_SUPPORT 307 #define CONFIG_SPL_LIBDISK_SUPPORT 308 #define CONFIG_SPL_I2C_SUPPORT 309 #define CONFIG_SPL_LIBGENERIC_SUPPORT 310 #define CONFIG_SPL_MMC_SUPPORT 311 #define CONFIG_SPL_FAT_SUPPORT 312 #define CONFIG_SPL_SERIAL_SUPPORT 313 #define CONFIG_SPL_NAND_SUPPORT 314 #define CONFIG_SPL_NAND_BASE 315 #define CONFIG_SPL_NAND_DRIVERS 316 #define CONFIG_SPL_NAND_ECC 317 #define CONFIG_SPL_POWER_SUPPORT 318 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 319 320 /* NAND boot config */ 321 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 322 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 323 #define CONFIG_SYS_NAND_PAGE_COUNT 64 324 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 325 #define CONFIG_SYS_NAND_OOBSIZE 64 326 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 327 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 328 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 329 10, 11, 12, 13} 330 #define CONFIG_SYS_NAND_ECCSIZE 512 331 #define CONFIG_SYS_NAND_ECCBYTES 3 332 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 333 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 334 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 335 336 /* 337 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 338 * 64 bytes before this address should be set aside for u-boot.img's 339 * header. That is 0x800FFFC0--0x80100000 should not be used for any 340 * other needs. 341 */ 342 #define CONFIG_SYS_TEXT_BASE 0x80100000 343 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 344 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 345 346 #endif /* __CONFIG_H */ 347