1 /* 2 * am3517_crane.h - Default configuration for AM3517 CraneBoard. 3 * 4 * Author: Srinath.R <srinath@mistralsolutions.com> 5 * 6 * Based on include/configs/am3517evm.h 7 * 8 * Copyright (C) 2011 Mistral Solutions pvt Ltd 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 20 #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ 21 /* Common ARM Erratas */ 22 #define CONFIG_ARM_ERRATA_454179 23 #define CONFIG_ARM_ERRATA_430973 24 #define CONFIG_ARM_ERRATA_621766 25 26 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 27 28 #include <asm/arch/cpu.h> /* get chip and board defs */ 29 #include <asm/arch/omap.h> 30 31 /* Clock Defines */ 32 #define V_OSCK 26000000 /* Clock output from T2 */ 33 #define V_SCLK (V_OSCK >> 1) 34 35 #define CONFIG_MISC_INIT_R 36 37 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 38 #define CONFIG_SETUP_MEMORY_TAGS 1 39 #define CONFIG_INITRD_TAG 1 40 #define CONFIG_REVISION_TAG 1 41 42 /* 43 * Size of malloc() pool 44 */ 45 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 46 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 47 /* initial data */ 48 /* 49 * DDR related 50 */ 51 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 52 53 /* 54 * Hardware drivers 55 */ 56 57 /* 58 * NS16550 Configuration 59 */ 60 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 61 62 #define CONFIG_SYS_NS16550_SERIAL 63 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 64 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 65 66 /* 67 * select serial console configuration 68 */ 69 #define CONFIG_CONS_INDEX 3 70 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 71 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ 72 73 /* allow to overwrite serial and ethaddr */ 74 #define CONFIG_ENV_OVERWRITE 75 #define CONFIG_BAUDRATE 115200 76 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 77 115200} 78 #define CONFIG_GENERIC_MMC 1 79 #define CONFIG_OMAP_HSMMC 1 80 #define CONFIG_DOS_PARTITION 1 81 82 /* 83 * USB configuration 84 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard 85 * Enable CONFIG_USB_MUSB_UDC for Device functionalities. 86 */ 87 #define CONFIG_USB_AM35X 1 88 #define CONFIG_USB_MUSB_HCD 1 89 90 #ifdef CONFIG_USB_AM35X 91 92 #ifdef CONFIG_USB_MUSB_HCD 93 94 #define CONGIG_CMD_STORAGE 95 96 #ifdef CONFIG_USB_KEYBOARD 97 #define CONFIG_SYS_USB_EVENT_POLL 98 #define CONFIG_PREBOOT "usb start" 99 #endif /* CONFIG_USB_KEYBOARD */ 100 101 #endif /* CONFIG_USB_MUSB_HCD */ 102 103 #ifdef CONFIG_USB_MUSB_UDC 104 /* USB device configuration */ 105 #define CONFIG_USB_DEVICE 1 106 #define CONFIG_USB_TTY 1 107 /* Change these to suit your needs */ 108 #define CONFIG_USBD_VENDORID 0x0451 109 #define CONFIG_USBD_PRODUCTID 0x5678 110 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 111 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" 112 #endif /* CONFIG_USB_MUSB_UDC */ 113 114 #endif /* CONFIG_USB_AM35X */ 115 116 /* commands to include */ 117 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 118 119 #define CONFIG_CMD_NAND /* NAND support */ 120 121 #define CONFIG_SYS_NO_FLASH 122 #define CONFIG_SYS_I2C 123 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 124 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 125 #define CONFIG_SYS_I2C_OMAP34XX 126 127 /* 128 * Board NAND Info. 129 */ 130 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 131 /* to access nand */ 132 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 133 /* to access */ 134 /* nand at CS0 */ 135 136 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 137 /* NAND devices */ 138 139 #define CONFIG_JFFS2_NAND 140 /* nand device jffs2 lives on */ 141 #define CONFIG_JFFS2_DEV "nand0" 142 /* start of jffs2 partition */ 143 #define CONFIG_JFFS2_PART_OFFSET 0x680000 144 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 145 146 /* Environment information */ 147 148 #define CONFIG_BOOTFILE "uImage" 149 150 #define CONFIG_EXTRA_ENV_SETTINGS \ 151 "loadaddr=0x82000000\0" \ 152 "console=ttyS2,115200n8\0" \ 153 "mmcdev=0\0" \ 154 "mmcargs=setenv bootargs console=${console} " \ 155 "root=/dev/mmcblk0p2 rw " \ 156 "rootfstype=ext3 rootwait\0" \ 157 "nandargs=setenv bootargs console=${console} " \ 158 "root=/dev/mtdblock4 rw " \ 159 "rootfstype=jffs2\0" \ 160 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 161 "bootscript=echo Running bootscript from mmc ...; " \ 162 "source ${loadaddr}\0" \ 163 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 164 "mmcboot=echo Booting from mmc ...; " \ 165 "run mmcargs; " \ 166 "bootm ${loadaddr}\0" \ 167 "nandboot=echo Booting from nand ...; " \ 168 "run nandargs; " \ 169 "nand read ${loadaddr} 280000 400000; " \ 170 "bootm ${loadaddr}\0" \ 171 172 #define CONFIG_BOOTCOMMAND \ 173 "mmc dev ${mmcdev}; if mmc rescan; then " \ 174 "if run loadbootscript; then " \ 175 "run bootscript; " \ 176 "else " \ 177 "if run loaduimage; then " \ 178 "run mmcboot; " \ 179 "else run nandboot; " \ 180 "fi; " \ 181 "fi; " \ 182 "else run nandboot; fi" 183 184 #define CONFIG_AUTO_COMPLETE 1 185 /* 186 * Miscellaneous configurable options 187 */ 188 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 189 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 190 /* Print Buffer Size */ 191 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 192 sizeof(CONFIG_SYS_PROMPT) + 16) 193 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 194 /* args */ 195 /* Boot Argument Buffer Size */ 196 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 197 /* memtest works on */ 198 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 199 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 200 0x01F00000) /* 31MB */ 201 202 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 203 /* address */ 204 205 /* 206 * AM3517 has 12 GP timers, they can be driven by the system clock 207 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 208 * This rate is divided by a local divisor. 209 */ 210 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 211 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 212 213 /*----------------------------------------------------------------------- 214 * Physical Memory Map 215 */ 216 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 217 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 218 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 219 220 /*----------------------------------------------------------------------- 221 * FLASH and environment organization 222 */ 223 224 /* **** PISMO SUPPORT *** */ 225 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 226 /* on one chip */ 227 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 228 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 229 230 #define CONFIG_SYS_FLASH_BASE NAND_BASE 231 232 /* Monitor at start of flash */ 233 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 234 235 #define CONFIG_NAND_OMAP_GPMC 236 #define CONFIG_ENV_IS_IN_NAND 1 237 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 238 239 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ 240 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 241 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 242 243 /*----------------------------------------------------------------------- 244 * CFI FLASH driver setup 245 */ 246 /* timeout values are in ticks */ 247 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 248 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 249 250 /* Flash banks JFFS2 should use */ 251 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 252 CONFIG_SYS_MAX_NAND_DEVICE) 253 #define CONFIG_SYS_JFFS2_MEM_NAND 254 /* use flash_info[2] */ 255 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 256 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 257 258 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 259 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 260 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 261 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 262 CONFIG_SYS_INIT_RAM_SIZE - \ 263 GENERATED_GBL_DATA_SIZE) 264 265 /* Defines for SPL */ 266 #define CONFIG_SPL_FRAMEWORK 267 #define CONFIG_SPL_BOARD_INIT 268 #define CONFIG_SPL_NAND_SIMPLE 269 #define CONFIG_SPL_TEXT_BASE 0x40200800 270 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 271 CONFIG_SPL_TEXT_BASE) 272 273 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 274 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 275 276 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 277 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 278 279 #define CONFIG_SPL_NAND_BASE 280 #define CONFIG_SPL_NAND_DRIVERS 281 #define CONFIG_SPL_NAND_ECC 282 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 283 284 /* NAND boot config */ 285 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 286 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 287 #define CONFIG_SYS_NAND_PAGE_COUNT 64 288 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 289 #define CONFIG_SYS_NAND_OOBSIZE 64 290 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 291 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 292 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 293 10, 11, 12, 13} 294 #define CONFIG_SYS_NAND_ECCSIZE 512 295 #define CONFIG_SYS_NAND_ECCBYTES 3 296 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 297 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 298 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 299 300 /* 301 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 302 * 64 bytes before this address should be set aside for u-boot.img's 303 * header. That is 0x800FFFC0--0x80100000 should not be used for any 304 * other needs. 305 */ 306 #define CONFIG_SYS_TEXT_BASE 0x80100000 307 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 308 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 309 310 #endif /* __CONFIG_H */ 311