1 /* 2 * am3517_crane.h - Default configuration for AM3517 CraneBoard. 3 * 4 * Author: Srinath.R <srinath@mistralsolutions.com> 5 * 6 * Based on include/configs/am3517evm.h 7 * 8 * Copyright (C) 2011 Mistral Solutions pvt Ltd 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 20 #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ 21 /* Common ARM Erratas */ 22 #define CONFIG_ARM_ERRATA_454179 23 #define CONFIG_ARM_ERRATA_430973 24 #define CONFIG_ARM_ERRATA_621766 25 26 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 27 28 #include <asm/arch/cpu.h> /* get chip and board defs */ 29 #include <asm/arch/omap.h> 30 31 /* Clock Defines */ 32 #define V_OSCK 26000000 /* Clock output from T2 */ 33 #define V_SCLK (V_OSCK >> 1) 34 35 #define CONFIG_MISC_INIT_R 36 37 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 38 #define CONFIG_SETUP_MEMORY_TAGS 1 39 #define CONFIG_INITRD_TAG 1 40 #define CONFIG_REVISION_TAG 1 41 42 /* 43 * Size of malloc() pool 44 */ 45 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 46 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 47 /* initial data */ 48 /* 49 * DDR related 50 */ 51 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 52 53 /* 54 * Hardware drivers 55 */ 56 57 /* 58 * NS16550 Configuration 59 */ 60 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 61 62 #define CONFIG_SYS_NS16550_SERIAL 63 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 64 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 65 66 /* 67 * select serial console configuration 68 */ 69 #define CONFIG_CONS_INDEX 3 70 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 71 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ 72 73 /* allow to overwrite serial and ethaddr */ 74 #define CONFIG_ENV_OVERWRITE 75 #define CONFIG_BAUDRATE 115200 76 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 77 115200} 78 79 /* 80 * USB configuration 81 * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard 82 * Enable CONFIG_USB_MUSB_UDC for Device functionalities. 83 */ 84 #define CONFIG_USB_AM35X 1 85 #define CONFIG_USB_MUSB_HCD 1 86 87 #ifdef CONFIG_USB_AM35X 88 89 #ifdef CONFIG_USB_MUSB_HCD 90 91 #ifdef CONFIG_USB_KEYBOARD 92 #define CONFIG_SYS_USB_EVENT_POLL 93 #define CONFIG_PREBOOT "usb start" 94 #endif /* CONFIG_USB_KEYBOARD */ 95 96 #endif /* CONFIG_USB_MUSB_HCD */ 97 98 #ifdef CONFIG_USB_MUSB_UDC 99 /* USB device configuration */ 100 #define CONFIG_USB_DEVICE 1 101 #define CONFIG_USB_TTY 1 102 /* Change these to suit your needs */ 103 #define CONFIG_USBD_VENDORID 0x0451 104 #define CONFIG_USBD_PRODUCTID 0x5678 105 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 106 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" 107 #endif /* CONFIG_USB_MUSB_UDC */ 108 109 #endif /* CONFIG_USB_AM35X */ 110 111 /* commands to include */ 112 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 113 114 #define CONFIG_CMD_NAND /* NAND support */ 115 116 #define CONFIG_SYS_NO_FLASH 117 #define CONFIG_SYS_I2C 118 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 119 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 120 #define CONFIG_SYS_I2C_OMAP34XX 121 122 /* 123 * Board NAND Info. 124 */ 125 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 126 /* to access nand */ 127 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 128 /* to access */ 129 /* nand at CS0 */ 130 131 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 132 /* NAND devices */ 133 134 #define CONFIG_JFFS2_NAND 135 /* nand device jffs2 lives on */ 136 #define CONFIG_JFFS2_DEV "nand0" 137 /* start of jffs2 partition */ 138 #define CONFIG_JFFS2_PART_OFFSET 0x680000 139 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 140 141 /* Environment information */ 142 143 #define CONFIG_BOOTFILE "uImage" 144 145 #define CONFIG_EXTRA_ENV_SETTINGS \ 146 "loadaddr=0x82000000\0" \ 147 "console=ttyS2,115200n8\0" \ 148 "mmcdev=0\0" \ 149 "mmcargs=setenv bootargs console=${console} " \ 150 "root=/dev/mmcblk0p2 rw " \ 151 "rootfstype=ext3 rootwait\0" \ 152 "nandargs=setenv bootargs console=${console} " \ 153 "root=/dev/mtdblock4 rw " \ 154 "rootfstype=jffs2\0" \ 155 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 156 "bootscript=echo Running bootscript from mmc ...; " \ 157 "source ${loadaddr}\0" \ 158 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 159 "mmcboot=echo Booting from mmc ...; " \ 160 "run mmcargs; " \ 161 "bootm ${loadaddr}\0" \ 162 "nandboot=echo Booting from nand ...; " \ 163 "run nandargs; " \ 164 "nand read ${loadaddr} 280000 400000; " \ 165 "bootm ${loadaddr}\0" \ 166 167 #define CONFIG_BOOTCOMMAND \ 168 "mmc dev ${mmcdev}; if mmc rescan; then " \ 169 "if run loadbootscript; then " \ 170 "run bootscript; " \ 171 "else " \ 172 "if run loaduimage; then " \ 173 "run mmcboot; " \ 174 "else run nandboot; " \ 175 "fi; " \ 176 "fi; " \ 177 "else run nandboot; fi" 178 179 #define CONFIG_AUTO_COMPLETE 1 180 /* 181 * Miscellaneous configurable options 182 */ 183 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 184 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 185 /* Print Buffer Size */ 186 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 187 sizeof(CONFIG_SYS_PROMPT) + 16) 188 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 189 /* args */ 190 /* Boot Argument Buffer Size */ 191 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 192 /* memtest works on */ 193 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 194 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 195 0x01F00000) /* 31MB */ 196 197 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 198 /* address */ 199 200 /* 201 * AM3517 has 12 GP timers, they can be driven by the system clock 202 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 203 * This rate is divided by a local divisor. 204 */ 205 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 206 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 207 208 /*----------------------------------------------------------------------- 209 * Physical Memory Map 210 */ 211 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 212 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 213 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 214 215 /*----------------------------------------------------------------------- 216 * FLASH and environment organization 217 */ 218 219 /* **** PISMO SUPPORT *** */ 220 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 221 /* on one chip */ 222 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 223 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 224 225 #define CONFIG_SYS_FLASH_BASE NAND_BASE 226 227 /* Monitor at start of flash */ 228 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 229 230 #define CONFIG_NAND_OMAP_GPMC 231 #define CONFIG_ENV_IS_IN_NAND 1 232 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 233 234 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ 235 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 236 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 237 238 /*----------------------------------------------------------------------- 239 * CFI FLASH driver setup 240 */ 241 /* timeout values are in ticks */ 242 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 243 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 244 245 /* Flash banks JFFS2 should use */ 246 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 247 CONFIG_SYS_MAX_NAND_DEVICE) 248 #define CONFIG_SYS_JFFS2_MEM_NAND 249 /* use flash_info[2] */ 250 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 251 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 252 253 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 254 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 255 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 256 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 257 CONFIG_SYS_INIT_RAM_SIZE - \ 258 GENERATED_GBL_DATA_SIZE) 259 260 /* Defines for SPL */ 261 #define CONFIG_SPL_FRAMEWORK 262 #define CONFIG_SPL_BOARD_INIT 263 #define CONFIG_SPL_NAND_SIMPLE 264 #define CONFIG_SPL_TEXT_BASE 0x40200800 265 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ 266 CONFIG_SPL_TEXT_BASE) 267 268 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 269 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 270 271 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 272 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 273 274 #define CONFIG_SPL_NAND_BASE 275 #define CONFIG_SPL_NAND_DRIVERS 276 #define CONFIG_SPL_NAND_ECC 277 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds" 278 279 /* NAND boot config */ 280 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 281 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 282 #define CONFIG_SYS_NAND_PAGE_COUNT 64 283 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 284 #define CONFIG_SYS_NAND_OOBSIZE 64 285 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 286 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 287 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 288 10, 11, 12, 13} 289 #define CONFIG_SYS_NAND_ECCSIZE 512 290 #define CONFIG_SYS_NAND_ECCBYTES 3 291 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW 292 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 293 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 294 295 /* 296 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 297 * 64 bytes before this address should be set aside for u-boot.img's 298 * header. That is 0x800FFFC0--0x80100000 should not be used for any 299 * other needs. 300 */ 301 #define CONFIG_SYS_TEXT_BASE 0x80100000 302 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 303 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 304 305 #endif /* __CONFIG_H */ 306