1 /* 2 * am3517_crane.h - Default configuration for AM3517 CraneBoard. 3 * 4 * Author: Srinath.R <srinath@mistralsolutions.com> 5 * 6 * Based on include/configs/am3517evm.h 7 * 8 * Copyright (C) 2011 Mistral Solutions pvt Ltd 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 /* 17 * High Level Configuration Options 18 */ 19 #define CONFIG_OMAP 1 /* in a TI OMAP core */ 20 #define CONFIG_OMAP34XX 1 /* which is a 34XX */ 21 #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ 22 #define CONFIG_OMAP_COMMON 23 24 #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ 25 26 #include <asm/arch/cpu.h> /* get chip and board defs */ 27 #include <asm/arch/omap3.h> 28 29 /* 30 * Display CPU and Board information 31 */ 32 #define CONFIG_DISPLAY_CPUINFO 1 33 #define CONFIG_DISPLAY_BOARDINFO 1 34 35 /* Clock Defines */ 36 #define V_OSCK 26000000 /* Clock output from T2 */ 37 #define V_SCLK (V_OSCK >> 1) 38 39 #define CONFIG_MISC_INIT_R 40 41 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ 42 #define CONFIG_SETUP_MEMORY_TAGS 1 43 #define CONFIG_INITRD_TAG 1 44 #define CONFIG_REVISION_TAG 1 45 46 /* 47 * Size of malloc() pool 48 */ 49 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ 50 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) 51 /* initial data */ 52 /* 53 * DDR related 54 */ 55 #define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) 56 57 /* 58 * Hardware drivers 59 */ 60 61 /* 62 * NS16550 Configuration 63 */ 64 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ 65 66 #define CONFIG_SYS_NS16550 67 #define CONFIG_SYS_NS16550_SERIAL 68 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 69 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK 70 71 /* 72 * select serial console configuration 73 */ 74 #define CONFIG_CONS_INDEX 3 75 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 76 #define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ 77 78 /* allow to overwrite serial and ethaddr */ 79 #define CONFIG_ENV_OVERWRITE 80 #define CONFIG_BAUDRATE 115200 81 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 82 115200} 83 #define CONFIG_GENERIC_MMC 1 84 #define CONFIG_MMC 1 85 #define CONFIG_OMAP_HSMMC 1 86 #define CONFIG_DOS_PARTITION 1 87 88 /* 89 * USB configuration 90 * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard 91 * Enable CONFIG_MUSB_UDC for Device functionalities. 92 */ 93 #define CONFIG_USB_AM35X 1 94 #define CONFIG_MUSB_HCD 1 95 96 #ifdef CONFIG_USB_AM35X 97 98 #ifdef CONFIG_MUSB_HCD 99 #define CONFIG_CMD_USB 100 101 #define CONFIG_USB_STORAGE 102 #define CONGIG_CMD_STORAGE 103 #define CONFIG_CMD_FAT 104 105 #ifdef CONFIG_USB_KEYBOARD 106 #define CONFIG_SYS_USB_EVENT_POLL 107 #define CONFIG_PREBOOT "usb start" 108 #endif /* CONFIG_USB_KEYBOARD */ 109 110 #endif /* CONFIG_MUSB_HCD */ 111 112 #ifdef CONFIG_MUSB_UDC 113 /* USB device configuration */ 114 #define CONFIG_USB_DEVICE 1 115 #define CONFIG_USB_TTY 1 116 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 117 /* Change these to suit your needs */ 118 #define CONFIG_USBD_VENDORID 0x0451 119 #define CONFIG_USBD_PRODUCTID 0x5678 120 #define CONFIG_USBD_MANUFACTURER "Texas Instruments" 121 #define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" 122 #endif /* CONFIG_MUSB_UDC */ 123 124 #endif /* CONFIG_USB_AM35X */ 125 126 /* commands to include */ 127 #include <config_cmd_default.h> 128 129 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 130 #define CONFIG_CMD_FAT /* FAT support */ 131 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 132 133 #define CONFIG_CMD_I2C /* I2C serial bus support */ 134 #define CONFIG_CMD_MMC /* MMC support */ 135 #define CONFIG_CMD_NAND /* NAND support */ 136 #define CONFIG_CMD_DHCP 137 #undef CONFIG_CMD_PING 138 139 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ 140 #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ 141 #undef CONFIG_CMD_IMI /* iminfo */ 142 #undef CONFIG_CMD_IMLS /* List all found images */ 143 144 #define CONFIG_SYS_NO_FLASH 145 #define CONFIG_HARD_I2C 1 146 #define CONFIG_SYS_I2C_SPEED 100000 147 #define CONFIG_SYS_I2C_SLAVE 1 148 #define CONFIG_DRIVER_OMAP34XX_I2C 1 149 150 #undef CONFIG_CMD_NET 151 #undef CONFIG_CMD_NFS 152 /* 153 * Board NAND Info. 154 */ 155 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ 156 /* to access nand */ 157 #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ 158 /* to access */ 159 /* nand at CS0 */ 160 161 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ 162 /* NAND devices */ 163 164 #define CONFIG_JFFS2_NAND 165 /* nand device jffs2 lives on */ 166 #define CONFIG_JFFS2_DEV "nand0" 167 /* start of jffs2 partition */ 168 #define CONFIG_JFFS2_PART_OFFSET 0x680000 169 #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ 170 171 /* Environment information */ 172 #define CONFIG_BOOTDELAY 10 173 174 #define CONFIG_BOOTFILE "uImage" 175 176 #define CONFIG_EXTRA_ENV_SETTINGS \ 177 "loadaddr=0x82000000\0" \ 178 "console=ttyS2,115200n8\0" \ 179 "mmcdev=0\0" \ 180 "mmcargs=setenv bootargs console=${console} " \ 181 "root=/dev/mmcblk0p2 rw " \ 182 "rootfstype=ext3 rootwait\0" \ 183 "nandargs=setenv bootargs console=${console} " \ 184 "root=/dev/mtdblock4 rw " \ 185 "rootfstype=jffs2\0" \ 186 "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ 187 "bootscript=echo Running bootscript from mmc ...; " \ 188 "source ${loadaddr}\0" \ 189 "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ 190 "mmcboot=echo Booting from mmc ...; " \ 191 "run mmcargs; " \ 192 "bootm ${loadaddr}\0" \ 193 "nandboot=echo Booting from nand ...; " \ 194 "run nandargs; " \ 195 "nand read ${loadaddr} 280000 400000; " \ 196 "bootm ${loadaddr}\0" \ 197 198 #define CONFIG_BOOTCOMMAND \ 199 "mmc dev ${mmcdev}; if mmc rescan; then " \ 200 "if run loadbootscript; then " \ 201 "run bootscript; " \ 202 "else " \ 203 "if run loaduimage; then " \ 204 "run mmcboot; " \ 205 "else run nandboot; " \ 206 "fi; " \ 207 "fi; " \ 208 "else run nandboot; fi" 209 210 #define CONFIG_AUTO_COMPLETE 1 211 /* 212 * Miscellaneous configurable options 213 */ 214 #define V_PROMPT "AM3517_CRANE # " 215 216 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 217 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 218 #define CONFIG_SYS_PROMPT V_PROMPT 219 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 220 /* Print Buffer Size */ 221 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 222 sizeof(CONFIG_SYS_PROMPT) + 16) 223 #define CONFIG_SYS_MAXARGS 32 /* max number of command */ 224 /* args */ 225 /* Boot Argument Buffer Size */ 226 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 227 /* memtest works on */ 228 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) 229 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ 230 0x01F00000) /* 31MB */ 231 232 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ 233 /* address */ 234 235 /* 236 * AM3517 has 12 GP timers, they can be driven by the system clock 237 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). 238 * This rate is divided by a local divisor. 239 */ 240 #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 241 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ 242 #define CONFIG_SYS_HZ 1000 243 244 /*----------------------------------------------------------------------- 245 * Physical Memory Map 246 */ 247 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ 248 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 249 #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 250 251 /*----------------------------------------------------------------------- 252 * FLASH and environment organization 253 */ 254 255 /* **** PISMO SUPPORT *** */ 256 257 /* Configure the PISMO */ 258 #define PISMO1_NAND_SIZE GPMC_SIZE_128M 259 #define PISMO1_ONEN_SIZE GPMC_SIZE_128M 260 261 #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ 262 /* on one chip */ 263 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ 264 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ 265 266 #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE 267 268 /* Monitor at start of flash */ 269 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 270 271 #define CONFIG_NAND_OMAP_GPMC 272 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 273 #define CONFIG_ENV_IS_IN_NAND 1 274 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ 275 276 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ 277 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET 278 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET 279 280 /*----------------------------------------------------------------------- 281 * CFI FLASH driver setup 282 */ 283 /* timeout values are in ticks */ 284 #define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) 285 #define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) 286 287 /* Flash banks JFFS2 should use */ 288 #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ 289 CONFIG_SYS_MAX_NAND_DEVICE) 290 #define CONFIG_SYS_JFFS2_MEM_NAND 291 /* use flash_info[2] */ 292 #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS 293 #define CONFIG_SYS_JFFS2_NUM_BANKS 1 294 295 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 296 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 297 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 298 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 299 CONFIG_SYS_INIT_RAM_SIZE - \ 300 GENERATED_GBL_DATA_SIZE) 301 302 /* Defines for SPL */ 303 #define CONFIG_SPL 304 #define CONFIG_SPL_FRAMEWORK 305 #define CONFIG_SPL_BOARD_INIT 306 #define CONFIG_SPL_NAND_SIMPLE 307 #define CONFIG_SPL_TEXT_BASE 0x40200800 308 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ 309 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 310 311 #define CONFIG_SPL_BSS_START_ADDR 0x80000000 312 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ 313 314 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 315 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ 316 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 317 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" 318 319 #define CONFIG_SPL_LIBCOMMON_SUPPORT 320 #define CONFIG_SPL_LIBDISK_SUPPORT 321 #define CONFIG_SPL_I2C_SUPPORT 322 #define CONFIG_SPL_LIBGENERIC_SUPPORT 323 #define CONFIG_SPL_MMC_SUPPORT 324 #define CONFIG_SPL_FAT_SUPPORT 325 #define CONFIG_SPL_SERIAL_SUPPORT 326 #define CONFIG_SPL_NAND_SUPPORT 327 #define CONFIG_SPL_NAND_BASE 328 #define CONFIG_SPL_NAND_DRIVERS 329 #define CONFIG_SPL_NAND_ECC 330 #define CONFIG_SPL_POWER_SUPPORT 331 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 332 333 /* NAND boot config */ 334 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 335 #define CONFIG_SYS_NAND_PAGE_COUNT 64 336 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 337 #define CONFIG_SYS_NAND_OOBSIZE 64 338 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 339 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 340 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 341 10, 11, 12, 13} 342 #define CONFIG_SYS_NAND_ECCSIZE 512 343 #define CONFIG_SYS_NAND_ECCBYTES 3 344 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 345 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 346 347 /* 348 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM 349 * 64 bytes before this address should be set aside for u-boot.img's 350 * header. That is 0x800FFFC0--0x80100000 should not be used for any 351 * other needs. 352 */ 353 #define CONFIG_SYS_TEXT_BASE 0x80100000 354 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000 355 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 356 357 #endif /* __CONFIG_H */ 358