1 /* 2 * am335x_evm.h 3 * 4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation version 2. 9 * 10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 11 * kind, whether express or implied; without even the implied warranty 12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 */ 15 16 #ifndef __CONFIG_AM335X_EVM_H 17 #define __CONFIG_AM335X_EVM_H 18 19 #include <configs/ti_am335x_common.h> 20 21 #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ 22 #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM 23 #define CONFIG_BOARD_LATE_INIT 24 25 /* Clock Defines */ 26 #define V_OSCK 24000000 /* Clock output from T2 */ 27 #define V_SCLK (V_OSCK) 28 29 /* Custom script for NOR */ 30 #define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds" 31 32 /* Always 128 KiB env size */ 33 #define CONFIG_ENV_SIZE (128 << 10) 34 35 #ifdef CONFIG_NAND 36 #define NANDARGS \ 37 "mtdids=" MTDIDS_DEFAULT "\0" \ 38 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 39 "nandargs=setenv bootargs console=${console} " \ 40 "${optargs} " \ 41 "root=${nandroot} " \ 42 "rootfstype=${nandrootfstype}\0" \ 43 "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ 44 "nandrootfstype=ubifs rootwait=1\0" \ 45 "nandboot=echo Booting from nand ...; " \ 46 "run nandargs; " \ 47 "nand read ${fdtaddr} u-boot-spl-os; " \ 48 "nand read ${loadaddr} kernel; " \ 49 "bootz ${loadaddr} - ${fdtaddr}\0" 50 #else 51 #define NANDARGS "" 52 #endif 53 54 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 55 56 #ifndef CONFIG_SPL_BUILD 57 #define CONFIG_EXTRA_ENV_SETTINGS \ 58 "loadaddr=0x80200000\0" \ 59 "fdtaddr=0x80F80000\0" \ 60 "fdt_high=0xffffffff\0" \ 61 "boot_fdt=try\0" \ 62 "rdaddr=0x81000000\0" \ 63 "bootpart=0:2\0" \ 64 "bootdir=/boot\0" \ 65 "bootfile=zImage\0" \ 66 "fdtfile=undefined\0" \ 67 "console=ttyO0,115200n8\0" \ 68 "optargs=\0" \ 69 "mmcdev=0\0" \ 70 "mmcroot=/dev/mmcblk0p2 ro\0" \ 71 "mmcrootfstype=ext4 rootwait\0" \ 72 "rootpath=/export/rootfs\0" \ 73 "nfsopts=nolock\0" \ 74 "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ 75 "::off\0" \ 76 "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ 77 "ramrootfstype=ext2\0" \ 78 "mmcargs=setenv bootargs console=${console} " \ 79 "${optargs} " \ 80 "root=${mmcroot} " \ 81 "rootfstype=${mmcrootfstype}\0" \ 82 "spiroot=/dev/mtdblock4 rw\0" \ 83 "spirootfstype=jffs2\0" \ 84 "spisrcaddr=0xe0000\0" \ 85 "spiimgsize=0x362000\0" \ 86 "spibusno=0\0" \ 87 "spiargs=setenv bootargs console=${console} " \ 88 "${optargs} " \ 89 "root=${spiroot} " \ 90 "rootfstype=${spirootfstype}\0" \ 91 "netargs=setenv bootargs console=${console} " \ 92 "${optargs} " \ 93 "root=/dev/nfs " \ 94 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ 95 "ip=dhcp\0" \ 96 "bootenv=uEnv.txt\0" \ 97 "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ 98 "importbootenv=echo Importing environment from mmc ...; " \ 99 "env import -t $loadaddr $filesize\0" \ 100 "ramargs=setenv bootargs console=${console} " \ 101 "${optargs} " \ 102 "root=${ramroot} " \ 103 "rootfstype=${ramrootfstype}\0" \ 104 "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ 105 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 106 "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 107 "mmcloados=run mmcargs; " \ 108 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 109 "if run loadfdt; then " \ 110 "bootz ${loadaddr} - ${fdtaddr}; " \ 111 "else " \ 112 "if test ${boot_fdt} = try; then " \ 113 "bootz; " \ 114 "else " \ 115 "echo WARN: Cannot load the DT; " \ 116 "fi; " \ 117 "fi; " \ 118 "else " \ 119 "bootz; " \ 120 "fi;\0" \ 121 "mmcboot=mmc dev ${mmcdev}; " \ 122 "if mmc rescan; then " \ 123 "echo SD/MMC found on device ${mmcdev};" \ 124 "if run loadbootenv; then " \ 125 "echo Loaded environment from ${bootenv};" \ 126 "run importbootenv;" \ 127 "fi;" \ 128 "if test -n $uenvcmd; then " \ 129 "echo Running uenvcmd ...;" \ 130 "run uenvcmd;" \ 131 "fi;" \ 132 "if run loadimage; then " \ 133 "run mmcloados;" \ 134 "fi;" \ 135 "fi;\0" \ 136 "spiboot=echo Booting from spi ...; " \ 137 "run spiargs; " \ 138 "sf probe ${spibusno}:0; " \ 139 "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ 140 "bootz ${loadaddr}\0" \ 141 "netboot=echo Booting from network ...; " \ 142 "setenv autoload no; " \ 143 "dhcp; " \ 144 "tftp ${loadaddr} ${bootfile}; " \ 145 "tftp ${fdtaddr} ${fdtfile}; " \ 146 "run netargs; " \ 147 "bootz ${loadaddr} - ${fdtaddr}\0" \ 148 "ramboot=echo Booting from ramdisk ...; " \ 149 "run ramargs; " \ 150 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ 151 "findfdt="\ 152 "if test $board_name = A335BONE; then " \ 153 "setenv fdtfile am335x-bone.dtb; fi; " \ 154 "if test $board_name = A335BNLT; then " \ 155 "setenv fdtfile am335x-boneblack.dtb; fi; " \ 156 "if test $board_name = A33515BB; then " \ 157 "setenv fdtfile am335x-evm.dtb; fi; " \ 158 "if test $board_name = A335X_SK; then " \ 159 "setenv fdtfile am335x-evmsk.dtb; fi; " \ 160 "if test $fdtfile = undefined; then " \ 161 "echo WARNING: Could not determine device tree to use; fi; \0" \ 162 NANDARGS \ 163 DFUARGS 164 #endif 165 166 #define CONFIG_BOOTCOMMAND \ 167 "run findfdt; " \ 168 "run mmcboot;" \ 169 "setenv mmcdev 1; " \ 170 "setenv bootpart 1:2; " \ 171 "run mmcboot;" \ 172 "run nandboot;" 173 174 /* NS16550 Configuration */ 175 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ 176 #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ 177 #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ 178 #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ 179 #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ 180 #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ 181 #define CONFIG_BAUDRATE 115200 182 183 #define CONFIG_CMD_EEPROM 184 #define CONFIG_ENV_EEPROM_IS_ON_I2C 185 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ 186 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 187 #define CONFIG_SYS_I2C_MULTI_EEPROMS 188 189 /* PMIC support */ 190 #define CONFIG_POWER_TPS65217 191 #define CONFIG_POWER_TPS65910 192 193 /* SPL */ 194 #ifndef CONFIG_NOR_BOOT 195 #define CONFIG_SPL_POWER_SUPPORT 196 #define CONFIG_SPL_YMODEM_SUPPORT 197 198 /* Bootcount using the RTC block */ 199 #define CONFIG_BOOTCOUNT_LIMIT 200 #define CONFIG_BOOTCOUNT_AM33XX 201 202 /* CPSW support */ 203 #define CONFIG_SPL_ETH_SUPPORT 204 205 /* USB gadget RNDIS */ 206 #define CONFIG_SPL_MUSB_NEW_SUPPORT 207 208 /* General network SPL, both CPSW and USB gadget RNDIS */ 209 #define CONFIG_SPL_NET_SUPPORT 210 #define CONFIG_SPL_ENV_SUPPORT 211 #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" 212 213 /* SPI flash. */ 214 #define CONFIG_SPL_SPI_SUPPORT 215 #define CONFIG_SPL_SPI_FLASH_SUPPORT 216 #define CONFIG_SPL_SPI_LOAD 217 #define CONFIG_SPL_SPI_BUS 0 218 #define CONFIG_SPL_SPI_CS 0 219 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 220 221 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" 222 223 #ifdef CONFIG_NAND 224 #define CONFIG_NAND_OMAP_GPMC 225 #define CONFIG_NAND_OMAP_ELM 226 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 227 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 228 CONFIG_SYS_NAND_PAGE_SIZE) 229 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 230 #define CONFIG_SYS_NAND_OOBSIZE 64 231 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) 232 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 233 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 234 10, 11, 12, 13, 14, 15, 16, 17, \ 235 18, 19, 20, 21, 22, 23, 24, 25, \ 236 26, 27, 28, 29, 30, 31, 32, 33, \ 237 34, 35, 36, 37, 38, 39, 40, 41, \ 238 42, 43, 44, 45, 46, 47, 48, 49, \ 239 50, 51, 52, 53, 54, 55, 56, 57, } 240 241 #define CONFIG_SYS_NAND_ECCSIZE 512 242 #define CONFIG_SYS_NAND_ECCBYTES 14 243 #define CONFIG_SYS_NAND_ONFI_DETECTION 244 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW 245 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 246 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 247 #endif 248 #endif 249 250 /* 251 * For NOR boot, we must set this to the start of where NOR is mapped 252 * in memory. 253 */ 254 #ifdef CONFIG_NOR_BOOT 255 #define CONFIG_SYS_TEXT_BASE 0x08000000 256 #endif 257 258 /* 259 * USB configuration. We enable MUSB support, both for host and for 260 * gadget. We set USB0 as peripheral and USB1 as host, based on the 261 * board schematic and physical port wired to each. Then for host we 262 * add mass storage support and for gadget we add both RNDIS ethernet 263 * and DFU. 264 */ 265 #define CONFIG_USB_MUSB_DSPS 266 #define CONFIG_ARCH_MISC_INIT 267 #define CONFIG_MUSB_GADGET 268 #define CONFIG_MUSB_PIO_ONLY 269 #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT 270 #define CONFIG_USB_GADGET 271 #define CONFIG_USBDOWNLOAD_GADGET 272 #define CONFIG_USB_GADGET_DUALSPEED 273 #define CONFIG_USB_GADGET_VBUS_DRAW 2 274 #define CONFIG_MUSB_HOST 275 #define CONFIG_AM335X_USB0 276 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL 277 #define CONFIG_AM335X_USB1 278 #define CONFIG_AM335X_USB1_MODE MUSB_HOST 279 280 #ifdef CONFIG_MUSB_HOST 281 #define CONFIG_CMD_USB 282 #define CONFIG_USB_STORAGE 283 #endif 284 285 #ifdef CONFIG_MUSB_GADGET 286 #define CONFIG_USB_ETHER 287 #define CONFIG_USB_ETH_RNDIS 288 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" 289 290 /* USB TI's IDs */ 291 #define CONFIG_G_DNL_VENDOR_NUM 0x0403 292 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 293 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" 294 #endif /* CONFIG_MUSB_GADGET */ 295 296 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) 297 /* disable host part of MUSB in SPL */ 298 #undef CONFIG_MUSB_HOST 299 /* 300 * Disable CPSW SPL support so we fit within the 101KiB limit. 301 */ 302 #undef CONFIG_SPL_ETH_SUPPORT 303 #endif 304 305 /* USB Device Firmware Update support */ 306 #define CONFIG_DFU_FUNCTION 307 #define CONFIG_DFU_MMC 308 #define CONFIG_CMD_DFU 309 #define DFU_ALT_INFO_MMC \ 310 "dfu_alt_info_mmc=" \ 311 "boot part 0 1;" \ 312 "rootfs part 0 2;" \ 313 "MLO fat 0 1;" \ 314 "MLO.raw mmc 100 100;" \ 315 "u-boot.img.raw mmc 300 400;" \ 316 "spl-os-args.raw mmc 80 80;" \ 317 "spl-os-image.raw mmc 900 2000;" \ 318 "spl-os-args fat 0 1;" \ 319 "spl-os-image fat 0 1;" \ 320 "u-boot.img fat 0 1;" \ 321 "uEnv.txt fat 0 1\0" 322 #ifdef CONFIG_NAND 323 #define CONFIG_DFU_NAND 324 #define DFU_ALT_INFO_NAND \ 325 "dfu_alt_info_nand=" \ 326 "SPL part 0 1;" \ 327 "SPL.backup1 part 0 2;" \ 328 "SPL.backup2 part 0 3;" \ 329 "SPL.backup3 part 0 4;" \ 330 "u-boot part 0 5;" \ 331 "u-boot-spl-os part 0 6;" \ 332 "kernel part 0 8;" \ 333 "rootfs part 0 9\0" 334 #else 335 #define DFU_ALT_INFO_NAND "" 336 #endif 337 #define CONFIG_DFU_RAM 338 #define DFU_ALT_INFO_RAM \ 339 "dfu_alt_info_ram=" \ 340 "kernel ram 0x80200000 0xD80000;" \ 341 "fdt ram 0x80F80000 0x80000;" \ 342 "ramdisk ram 0x81000000 0x4000000\0" 343 #define DFUARGS \ 344 "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \ 345 DFU_ALT_INFO_MMC \ 346 DFU_ALT_INFO_RAM \ 347 DFU_ALT_INFO_NAND 348 349 /* 350 * Default to using SPI for environment, etc. 351 * 0x000000 - 0x020000 : SPL (128KiB) 352 * 0x020000 - 0x0A0000 : U-Boot (512KiB) 353 * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) 354 * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) 355 * 0x0E0000 - 0x442000 : Linux Kernel 356 * 0x442000 - 0x800000 : Userland 357 */ 358 #if defined(CONFIG_SPI_BOOT) 359 #define CONFIG_ENV_IS_IN_SPI_FLASH 360 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 361 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 362 #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ 363 #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ 364 #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ 365 #define MTDIDS_DEFAULT "nor0=m25p80-flash.0" 366 #define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \ 367 "512k(u-boot),128k(u-boot-env1)," \ 368 "128k(u-boot-env2),3464k(kernel)," \ 369 "-(rootfs)" 370 #elif defined(CONFIG_EMMC_BOOT) 371 #undef CONFIG_ENV_IS_NOWHERE 372 #define CONFIG_ENV_IS_IN_MMC 373 #define CONFIG_SYS_MMC_ENV_DEV 1 374 #define CONFIG_SYS_MMC_ENV_PART 2 375 #define CONFIG_ENV_OFFSET 0x0 376 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 377 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 378 #endif 379 380 /* SPI flash. */ 381 #define CONFIG_CMD_SF 382 #define CONFIG_SPI_FLASH 383 #define CONFIG_SPI_FLASH_WINBOND 384 #define CONFIG_SF_DEFAULT_SPEED 24000000 385 386 /* Network. */ 387 #define CONFIG_PHY_GIGE 388 #define CONFIG_PHYLIB 389 #define CONFIG_PHY_ADDR 0 390 #define CONFIG_PHY_SMSC 391 392 /* NAND support */ 393 #ifdef CONFIG_NAND 394 #define CONFIG_CMD_NAND 395 #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 396 #if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) 397 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" 398 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ 399 "128k(SPL.backup1)," \ 400 "128k(SPL.backup2)," \ 401 "128k(SPL.backup3),1792k(u-boot)," \ 402 "128k(u-boot-spl-os)," \ 403 "128k(u-boot-env),5m(kernel),-(rootfs)" 404 #define CONFIG_ENV_IS_IN_NAND 405 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ 406 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 407 #endif 408 #endif 409 410 /* 411 * NOR Size = 16 MiB 412 * Number of Sectors/Blocks = 128 413 * Sector Size = 128 KiB 414 * Word length = 16 bits 415 * Default layout: 416 * 0x000000 - 0x07FFFF : U-Boot (512 KiB) 417 * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) 418 * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) 419 * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) 420 * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) 421 */ 422 #if defined(CONFIG_NOR) 423 #undef CONFIG_SYS_NO_FLASH 424 #define CONFIG_CMD_FLASH 425 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 426 #define CONFIG_SYS_FLASH_PROTECTION 427 #define CONFIG_SYS_FLASH_CFI 428 #define CONFIG_FLASH_CFI_DRIVER 429 #define CONFIG_FLASH_CFI_MTD 430 #define CONFIG_SYS_MAX_FLASH_SECT 128 431 #define CONFIG_SYS_MAX_FLASH_BANKS 1 432 #define CONFIG_SYS_FLASH_BASE (0x08000000) 433 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 434 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE 435 #ifdef CONFIG_NOR_BOOT 436 #define CONFIG_ENV_IS_IN_FLASH 437 #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ 438 #define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ 439 #define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ 440 #define MTDIDS_DEFAULT "nor0=physmap-flash.0" 441 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ 442 "512k(u-boot)," \ 443 "128k(u-boot-env1)," \ 444 "128k(u-boot-env2)," \ 445 "4m(kernel),-(rootfs)" 446 #endif 447 #endif /* NOR support */ 448 449 #endif /* ! __CONFIG_AM335X_EVM_H */ 450