xref: /openbmc/u-boot/include/configs/am335x_evm.h (revision 7cedd181)
1 /*
2  * am335x_evm.h
3  *
4  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation version 2.
9  *
10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11  * kind, whether express or implied; without even the implied warranty
12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15 
16 #ifndef __CONFIG_AM335X_EVM_H
17 #define __CONFIG_AM335X_EVM_H
18 
19 #define CONFIG_AM33XX
20 
21 #include <asm/arch/cpu.h>
22 #include <asm/arch/hardware.h>
23 
24 #define CONFIG_DMA_COHERENT
25 #define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
26 
27 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
28 #define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
29 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
30 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
31 #define CONFIG_SYS_PROMPT		"U-Boot# "
32 #define CONFIG_SYS_NO_FLASH
33 #define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
34 #define CONFIG_MACH_TYPE		MACH_TYPE_TIAM335EVM
35 
36 #define CONFIG_OF_LIBFDT
37 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
38 #define CONFIG_SETUP_MEMORY_TAGS
39 #define CONFIG_INITRD_TAG
40 
41 /* commands to include */
42 #include <config_cmd_default.h>
43 
44 #define CONFIG_CMD_ASKENV
45 #define CONFIG_VERSION_VARIABLE
46 
47 /* set to negative value for no autoboot */
48 #define CONFIG_BOOTDELAY		3
49 #define CONFIG_EXTRA_ENV_SETTINGS \
50 	"loadaddr=0x80200000\0" \
51 	"fdtaddr=0x80F80000\0" \
52 	"rdaddr=0x81000000\0" \
53 	"bootfile=/boot/uImage\0" \
54 	"console=ttyO0,115200n8\0" \
55 	"optargs=\0" \
56 	"mmcdev=0\0" \
57 	"mmcroot=/dev/mmcblk0p2 rw\0" \
58 	"mmcrootfstype=ext4 rootwait\0" \
59 	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
60 	"ramrootfstype=ext2\0" \
61 	"mmcargs=setenv bootargs console=${console} " \
62 		"${optargs} " \
63 		"root=${mmcroot} " \
64 		"rootfstype=${mmcrootfstype}\0" \
65 	"bootenv=uEnv.txt\0" \
66 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
67 	"importbootenv=echo Importing environment from mmc ...; " \
68 		"env import -t $loadaddr $filesize\0" \
69 	"ramargs=setenv bootargs console=${console} " \
70 		"${optargs} " \
71 		"root=${ramroot} " \
72 		"rootfstype=${ramrootfstype}\0" \
73 	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
74 	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
75 	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
76 	"mmcboot=echo Booting from mmc ...; " \
77 		"run mmcargs; " \
78 		"bootm ${loadaddr}\0" \
79 	"ramboot=echo Booting from ramdisk ...; " \
80 		"run ramargs; " \
81 		"bootm ${loadaddr}\0" \
82 
83 #define CONFIG_BOOTCOMMAND \
84 	"if mmc rescan ${mmcdev}; then " \
85 		"echo SD/MMC found on device ${mmcdev};" \
86 		"if run loadbootenv; then " \
87 			"echo Loaded environment from ${bootenv};" \
88 			"run importbootenv;" \
89 		"fi;" \
90 		"if test -n $uenvcmd; then " \
91 			"echo Running uenvcmd ...;" \
92 			"run uenvcmd;" \
93 		"fi;" \
94 		"if run loaduimage; then " \
95 			"run mmcboot;" \
96 		"fi;" \
97 	"fi;" \
98 
99 /* Clock Defines */
100 #define V_OSCK				24000000  /* Clock output from T2 */
101 #define V_SCLK				(V_OSCK)
102 
103 #define CONFIG_CMD_ECHO
104 
105 /* max number of command args */
106 #define CONFIG_SYS_MAXARGS		16
107 
108 /* Console I/O Buffer Size */
109 #define CONFIG_SYS_CBSIZE		512
110 
111 /* Print Buffer Size */
112 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
113 					+ sizeof(CONFIG_SYS_PROMPT) + 16)
114 
115 /* Boot Argument Buffer Size */
116 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
117 
118 /*
119  * memtest works on 8 MB in DRAM after skipping 32MB from
120  * start addr of ram disk
121  */
122 #define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64 * 1024 * 1024))
123 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
124 					+ (8 * 1024 * 1024))
125 
126 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
127 #define CONFIG_SYS_HZ			1000 /* 1ms clock */
128 
129 #define CONFIG_MMC
130 #define CONFIG_GENERIC_MMC
131 #define CONFIG_OMAP_HSMMC
132 #define CONFIG_CMD_MMC
133 #define CONFIG_DOS_PARTITION
134 #define CONFIG_CMD_FAT
135 #define CONFIG_CMD_EXT2
136 
137 #define CONFIG_SPI
138 #define CONFIG_OMAP3_SPI
139 #define CONFIG_MTD_DEVICE
140 #define CONFIG_SPI_FLASH
141 #define CONFIG_SPI_FLASH_WINBOND
142 #define CONFIG_CMD_SF
143 #define CONFIG_SF_DEFAULT_SPEED		(24000000)
144 
145  /* Physical Memory Map */
146 #define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
147 #define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
148 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
149 
150 #define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
151 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
152 						GENERATED_GBL_DATA_SIZE)
153  /* Platform/Board specific defs */
154 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
155 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
156 #define CONFIG_SYS_HZ			1000
157 
158 /* NS16550 Configuration */
159 #define CONFIG_SYS_NS16550
160 #define CONFIG_SYS_NS16550_SERIAL
161 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
162 #define CONFIG_SYS_NS16550_CLK		(48000000)
163 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
164 
165 /* I2C Configuration */
166 #define CONFIG_I2C
167 #define CONFIG_CMD_I2C
168 #define CONFIG_HARD_I2C
169 #define CONFIG_SYS_I2C_SPEED		100000
170 #define CONFIG_SYS_I2C_SLAVE		1
171 #define CONFIG_I2C_MULTI_BUS
172 #define CONFIG_DRIVER_OMAP24XX_I2C
173 #define CONFIG_CMD_EEPROM
174 #define CONFIG_ENV_EEPROM_IS_ON_I2C
175 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
176 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
177 #define CONFIG_SYS_I2C_MULTI_EEPROMS
178 
179 #define CONFIG_OMAP_GPIO
180 
181 #define CONFIG_BAUDRATE		115200
182 #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
183 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
184 
185 /*
186  * select serial console configuration
187  */
188 #define CONFIG_SERIAL1			1
189 #define CONFIG_CONS_INDEX		1
190 #define CONFIG_SYS_CONSOLE_INFO_QUIET
191 
192 #define CONFIG_ENV_IS_NOWHERE
193 
194 /* Defines for SPL */
195 #define CONFIG_SPL
196 #define CONFIG_SPL_TEXT_BASE		0x402F0400
197 #define CONFIG_SPL_MAX_SIZE		(46 * 1024)
198 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
199 
200 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
201 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
202 
203 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
204 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
205 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
206 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
207 #define CONFIG_SPL_MMC_SUPPORT
208 #define CONFIG_SPL_FAT_SUPPORT
209 #define CONFIG_SPL_I2C_SUPPORT
210 
211 #define CONFIG_SPL_LIBCOMMON_SUPPORT
212 #define CONFIG_SPL_LIBDISK_SUPPORT
213 #define CONFIG_SPL_LIBGENERIC_SUPPORT
214 #define CONFIG_SPL_SERIAL_SUPPORT
215 #define CONFIG_SPL_GPIO_SUPPORT
216 #define CONFIG_SPL_YMODEM_SUPPORT
217 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
218 
219 /*
220  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
221  * 64 bytes before this address should be set aside for u-boot.img's
222  * header. That is 0x800FFFC0--0x80100000 should not be used for any
223  * other needs.
224  */
225 #define CONFIG_SYS_TEXT_BASE		0x80800000
226 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
227 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
228 
229 /* Since SPL did pll and ddr initialization for us,
230  * we don't need to do it twice.
231  */
232 #ifndef CONFIG_SPL_BUILD
233 #define CONFIG_SKIP_LOWLEVEL_INIT
234 #endif
235 
236 #define CONFIG_CMD_NET
237 #define CONFIG_CMD_DHCP
238 #define CONFIG_CMD_PING
239 #define CONFIG_DRIVER_TI_CPSW
240 #define CONFIG_MII
241 #define CONFIG_BOOTP_DEFAULT
242 #define CONFIG_BOOTP_DNS
243 #define CONFIG_BOOTP_DNS2
244 #define CONFIG_BOOTP_SEND_HOSTNAME
245 #define CONFIG_BOOTP_GATEWAY
246 #define CONFIG_BOOTP_SUBNETMASK
247 #define CONFIG_NET_RETRY_COUNT         10
248 #define CONFIG_NET_MULTI
249 #define CONFIG_PHY_GIGE
250 #define CONFIG_PHYLIB
251 #define CONFIG_PHY_SMSC
252 
253 #endif	/* ! __CONFIG_AM335X_EVM_H */
254