1 /* 2 * Copyright (C) 2016 Timesys Corporation 3 * Copyright (C) 2016 Advantech Corporation 4 * Copyright (C) 2012 Freescale Semiconductor, Inc. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H 10 #define __ADVANTECH_DMSBA16_CONFIG_H 11 12 #include <asm/arch/imx-regs.h> 13 #include <asm/imx-common/gpio.h> 14 15 #define CONFIG_BOARD_NAME "Advantech DMS-BA16" 16 #define CONFIG_DEFAULT_FDT_FILE "imx6q-dms-ba16.dtb" 17 18 #define CONFIG_MXC_UART_BASE UART4_BASE 19 #define CONFIG_CONSOLE_DEV "ttymxc3" 20 #define CONFIG_EXTRA_BOOTARGS "panic=10" 21 22 #define CONFIG_BOOT_DIR "" 23 #define CONFIG_LOADCMD "fatload" 24 #define CONFIG_RFSPART "2" 25 26 #define CONFIG_SUPPORT_EMMC_BOOT 27 28 #include "mx6_common.h" 29 #include <linux/sizes.h> 30 31 #define CONFIG_DISPLAY_CPUINFO 32 #define CONFIG_DISPLAY_BOARDINFO 33 34 #define CONFIG_CMDLINE_TAG 35 #define CONFIG_SETUP_MEMORY_TAGS 36 #define CONFIG_INITRD_TAG 37 #define CONFIG_REVISION_TAG 38 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 39 40 #define CONFIG_BOARD_EARLY_INIT_F 41 #define CONFIG_BOARD_LATE_INIT 42 43 #define CONFIG_MXC_GPIO 44 #define CONFIG_MXC_UART 45 46 #define CONFIG_CMD_FUSE 47 #define CONFIG_MXC_OCOTP 48 49 /* SATA Configs */ 50 #define CONFIG_CMD_SATA 51 #define CONFIG_DWC_AHSATA 52 #define CONFIG_SYS_SATA_MAX_DEVICE 1 53 #define CONFIG_DWC_AHSATA_PORT_ID 0 54 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 55 #define CONFIG_LBA48 56 #define CONFIG_LIBATA 57 58 /* MMC Configs */ 59 #define CONFIG_FSL_ESDHC 60 #define CONFIG_FSL_USDHC 61 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 62 #define CONFIG_MMC 63 #define CONFIG_GENERIC_MMC 64 #define CONFIG_BOUNCE_BUFFER 65 #define CONFIG_DOS_PARTITION 66 67 /* USB Configs */ 68 #define CONFIG_USB_EHCI 69 #define CONFIG_USB_EHCI_MX6 70 #define CONFIG_USB_STORAGE 71 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 72 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 73 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 74 #define CONFIG_MXC_USB_FLAGS 0 75 #define CONFIG_USB_KEYBOARD 76 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 77 78 #define CONFIG_USBD_HS 79 #define CONFIG_USB_FUNCTION_MASS_STORAGE 80 #define CONFIG_USB_GADGET_VBUS_DRAW 2 81 82 /* Networking Configs */ 83 #define CONFIG_FEC_MXC 84 #define CONFIG_MII 85 #define IMX_FEC_BASE ENET_BASE_ADDR 86 #define CONFIG_FEC_XCV_TYPE RGMII 87 #define CONFIG_ETHPRIME "FEC" 88 #define CONFIG_FEC_MXC_PHYADDR 4 89 #define CONFIG_PHYLIB 90 #define CONFIG_PHY_ATHEROS 91 92 /* Serial Flash */ 93 #ifdef CONFIG_CMD_SF 94 #define CONFIG_MXC_SPI 95 #define CONFIG_SF_DEFAULT_BUS 0 96 #define CONFIG_SF_DEFAULT_CS 0 97 #define CONFIG_SF_DEFAULT_SPEED 20000000 98 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 99 #endif 100 101 /* allow to overwrite serial and ethaddr */ 102 #define CONFIG_ENV_OVERWRITE 103 #define CONFIG_CONS_INDEX 1 104 #define CONFIG_BAUDRATE 115200 105 106 /* Command definition */ 107 #define CONFIG_CMD_BMODE 108 109 #define CONFIG_LOADADDR 0x12000000 110 #define CONFIG_SYS_TEXT_BASE 0x17800000 111 112 #define CONFIG_EXTRA_ENV_SETTINGS \ 113 "script=boot.scr\0" \ 114 "image=" CONFIG_BOOT_DIR "/uImage\0" \ 115 "uboot=u-boot.imx\0" \ 116 "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \ 117 "fdt_addr=0x18000000\0" \ 118 "boot_fdt=yes\0" \ 119 "ip_dyn=yes\0" \ 120 "console=" CONFIG_CONSOLE_DEV "\0" \ 121 "fdt_high=0xffffffff\0" \ 122 "initrd_high=0xffffffff\0" \ 123 "sddev=0\0" \ 124 "emmcdev=1\0" \ 125 "partnum=1\0" \ 126 "loadcmd=" CONFIG_LOADCMD "\0" \ 127 "rfspart=" CONFIG_RFSPART "\0" \ 128 "update_sd_firmware=" \ 129 "if test ${ip_dyn} = yes; then " \ 130 "setenv get_cmd dhcp; " \ 131 "else " \ 132 "setenv get_cmd tftp; " \ 133 "fi; " \ 134 "if mmc dev ${mmcdev}; then " \ 135 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 136 "setexpr fw_sz ${filesize} / 0x200; " \ 137 "setexpr fw_sz ${fw_sz} + 1; " \ 138 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 139 "fi; " \ 140 "fi\0" \ 141 "update_sf_uboot=" \ 142 "if tftp $loadaddr $uboot; then " \ 143 "sf probe; " \ 144 "sf erase 0 0xC0000; " \ 145 "sf write $loadaddr 0x400 $filesize; " \ 146 "echo 'U-Boot upgraded. Please reset'; " \ 147 "fi\0" \ 148 "setargs=setenv bootargs console=${console},${baudrate} " \ 149 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \ 150 "loadbootscript=" \ 151 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ 152 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ 153 " source\0" \ 154 "loadimage=" \ 155 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ 156 "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ 157 "tryboot=" \ 158 "if run loadbootscript; then " \ 159 "run bootscript; " \ 160 "else " \ 161 "if run loadimage; then " \ 162 "run doboot; " \ 163 "fi; " \ 164 "fi;\0" \ 165 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ 166 "run setargs; " \ 167 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 168 "if run loadfdt; then " \ 169 "bootm ${loadaddr} - ${fdt_addr}; " \ 170 "else " \ 171 "if test ${boot_fdt} = try; then " \ 172 "bootm; " \ 173 "else " \ 174 "echo WARN: Cannot load the DT; " \ 175 "fi; " \ 176 "fi; " \ 177 "else " \ 178 "bootm; " \ 179 "fi;\0" \ 180 "netargs=setenv bootargs console=${console},${baudrate} " \ 181 "root=/dev/nfs " \ 182 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 183 "netboot=echo Booting from net ...; " \ 184 "run netargs; " \ 185 "if test ${ip_dyn} = yes; then " \ 186 "setenv get_cmd dhcp; " \ 187 "else " \ 188 "setenv get_cmd tftp; " \ 189 "fi; " \ 190 "${get_cmd} ${image}; " \ 191 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 192 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 193 "bootm ${loadaddr} - ${fdt_addr}; " \ 194 "else " \ 195 "if test ${boot_fdt} = try; then " \ 196 "bootm; " \ 197 "else " \ 198 "echo WARN: Cannot load the DT; " \ 199 "fi; " \ 200 "fi; " \ 201 "else " \ 202 "bootm; " \ 203 "fi;\0" \ 204 205 #define CONFIG_BOOTCOMMAND \ 206 "usb start; " \ 207 "setenv dev usb; " \ 208 "setenv devnum 0; " \ 209 "setenv rootdev sda${rfspart}; " \ 210 "run tryboot; " \ 211 \ 212 "setenv dev mmc; " \ 213 "setenv rootdev mmcblk0p${rfspart}; " \ 214 \ 215 "setenv devnum ${sddev}; " \ 216 "if mmc dev ${devnum}; then " \ 217 "run tryboot; " \ 218 "fi; " \ 219 \ 220 "setenv devnum ${emmcdev}; " \ 221 "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \ 222 "if mmc dev ${devnum}; then " \ 223 "run tryboot; " \ 224 "fi; " \ 225 \ 226 "bmode usb; " \ 227 228 #define CONFIG_ARP_TIMEOUT 200UL 229 230 /* Miscellaneous configurable options */ 231 #define CONFIG_SYS_LONGHELP 232 #define CONFIG_AUTO_COMPLETE 233 234 /* Print Buffer Size */ 235 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 236 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 237 238 #define CONFIG_SYS_MEMTEST_START 0x10000000 239 #define CONFIG_SYS_MEMTEST_END 0x10010000 240 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 241 242 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 243 244 #define CONFIG_CMDLINE_EDITING 245 #define CONFIG_STACKSIZE (128 * 1024) 246 247 /* Physical Memory Map */ 248 #define CONFIG_NR_DRAM_BANKS 1 249 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 250 251 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 252 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 253 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 254 255 #define CONFIG_SYS_INIT_SP_OFFSET \ 256 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 257 #define CONFIG_SYS_INIT_SP_ADDR \ 258 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 259 260 /* FLASH and environment organization */ 261 #define CONFIG_SYS_NO_FLASH 262 263 #define CONFIG_ENV_IS_IN_SPI_FLASH 264 #define CONFIG_ENV_SIZE (8 * 1024) 265 #define CONFIG_ENV_OFFSET (768 * 1024) 266 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 267 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 268 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 269 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 270 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 271 272 #ifndef CONFIG_SYS_DCACHE_OFF 273 #endif 274 275 #define CONFIG_SYS_FSL_USDHC_NUM 3 276 277 /* Framebuffer */ 278 #define CONFIG_VIDEO 279 #define CONFIG_VIDEO_IPUV3 280 #define CONFIG_CFB_CONSOLE 281 #define CONFIG_VGA_AS_SINGLE_DEVICE 282 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 283 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 284 #define CONFIG_VIDEO_BMP_RLE8 285 #define CONFIG_SPLASH_SCREEN 286 #define CONFIG_SPLASH_SCREEN_ALIGN 287 #define CONFIG_BMP_16BPP 288 #define CONFIG_VIDEO_LOGO 289 #define CONFIG_VIDEO_BMP_LOGO 290 #define CONFIG_IPUV3_CLK 260000000 291 #define CONFIG_IMX_HDMI 292 #define CONFIG_IMX_VIDEO_SKIP 293 294 #define CONFIG_PWM_IMX 295 #define CONFIG_IMX6_PWM_PER_CLK 66000000 296 297 #undef CONFIG_CMD_PCI 298 #ifdef CONFIG_CMD_PCI 299 #define CONFIG_PCI 300 #define CONFIG_PCI_PNP 301 #define CONFIG_PCI_SCAN_SHOW 302 #define CONFIG_PCIE_IMX 303 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 304 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) 305 #endif 306 307 /* I2C Configs */ 308 #define CONFIG_SYS_I2C 309 #define CONFIG_SYS_I2C_MXC 310 #define CONFIG_SYS_I2C_SPEED 100000 311 #define CONFIG_SYS_I2C_MXC_I2C1 312 #define CONFIG_SYS_I2C_MXC_I2C2 313 #define CONFIG_SYS_I2C_MXC_I2C3 314 315 #endif /* __ADVANTECH_DMSBA16_CONFIG_H */ 316