1 /* 2 * Copyright (C) 2016 Timesys Corporation 3 * Copyright (C) 2016 Advantech Corporation 4 * Copyright (C) 2012 Freescale Semiconductor, Inc. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H 10 #define __ADVANTECH_DMSBA16_CONFIG_H 11 12 #include <asm/arch/imx-regs.h> 13 #include <asm/imx-common/gpio.h> 14 15 #define CONFIG_BOARD_NAME "Advantech DMS-BA16" 16 #define CONFIG_DEFAULT_FDT_FILE "imx6q-dms-ba16.dtb" 17 18 #define CONFIG_MXC_UART_BASE UART4_BASE 19 #define CONSOLE_DEV "ttymxc3" 20 #define CONFIG_EXTRA_BOOTARGS "panic=10" 21 22 #define CONFIG_BOOT_DIR "" 23 #define CONFIG_LOADCMD "fatload" 24 #define CONFIG_RFSPART "2" 25 26 #define CONFIG_SUPPORT_EMMC_BOOT 27 28 #include "mx6_common.h" 29 #include <linux/sizes.h> 30 31 #define CONFIG_CMDLINE_TAG 32 #define CONFIG_SETUP_MEMORY_TAGS 33 #define CONFIG_INITRD_TAG 34 #define CONFIG_REVISION_TAG 35 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 36 37 #define CONFIG_BOARD_EARLY_INIT_F 38 #define CONFIG_BOARD_LATE_INIT 39 40 #define CONFIG_MXC_GPIO 41 #define CONFIG_MXC_UART 42 43 #define CONFIG_CMD_FUSE 44 #define CONFIG_MXC_OCOTP 45 46 /* SATA Configs */ 47 #define CONFIG_CMD_SATA 48 #define CONFIG_DWC_AHSATA 49 #define CONFIG_SYS_SATA_MAX_DEVICE 1 50 #define CONFIG_DWC_AHSATA_PORT_ID 0 51 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 52 #define CONFIG_LBA48 53 #define CONFIG_LIBATA 54 55 /* MMC Configs */ 56 #define CONFIG_FSL_ESDHC 57 #define CONFIG_FSL_USDHC 58 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 59 #define CONFIG_MMC 60 #define CONFIG_GENERIC_MMC 61 #define CONFIG_BOUNCE_BUFFER 62 #define CONFIG_DOS_PARTITION 63 64 /* USB Configs */ 65 #define CONFIG_USB_EHCI 66 #define CONFIG_USB_EHCI_MX6 67 #define CONFIG_USB_STORAGE 68 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 69 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 70 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 71 #define CONFIG_MXC_USB_FLAGS 0 72 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 73 74 #define CONFIG_USBD_HS 75 #define CONFIG_USB_FUNCTION_MASS_STORAGE 76 #define CONFIG_USB_GADGET_VBUS_DRAW 2 77 78 /* Networking Configs */ 79 #define CONFIG_FEC_MXC 80 #define CONFIG_MII 81 #define IMX_FEC_BASE ENET_BASE_ADDR 82 #define CONFIG_FEC_XCV_TYPE RGMII 83 #define CONFIG_ETHPRIME "FEC" 84 #define CONFIG_FEC_MXC_PHYADDR 4 85 #define CONFIG_PHYLIB 86 #define CONFIG_PHY_ATHEROS 87 88 /* Serial Flash */ 89 #ifdef CONFIG_CMD_SF 90 #define CONFIG_MXC_SPI 91 #define CONFIG_SF_DEFAULT_BUS 0 92 #define CONFIG_SF_DEFAULT_CS 0 93 #define CONFIG_SF_DEFAULT_SPEED 20000000 94 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 95 #endif 96 97 /* allow to overwrite serial and ethaddr */ 98 #define CONFIG_ENV_OVERWRITE 99 #define CONFIG_CONS_INDEX 1 100 #define CONFIG_BAUDRATE 115200 101 102 /* Command definition */ 103 #define CONFIG_CMD_BMODE 104 105 #define CONFIG_LOADADDR 0x12000000 106 #define CONFIG_SYS_TEXT_BASE 0x17800000 107 108 #define CONFIG_EXTRA_ENV_SETTINGS \ 109 "script=boot.scr\0" \ 110 "image=" CONFIG_BOOT_DIR "/uImage\0" \ 111 "uboot=u-boot.imx\0" \ 112 "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \ 113 "fdt_addr=0x18000000\0" \ 114 "boot_fdt=yes\0" \ 115 "ip_dyn=yes\0" \ 116 "console=" CONSOLE_DEV "\0" \ 117 "fdt_high=0xffffffff\0" \ 118 "initrd_high=0xffffffff\0" \ 119 "sddev=0\0" \ 120 "emmcdev=1\0" \ 121 "partnum=1\0" \ 122 "loadcmd=" CONFIG_LOADCMD "\0" \ 123 "rfspart=" CONFIG_RFSPART "\0" \ 124 "update_sd_firmware=" \ 125 "if test ${ip_dyn} = yes; then " \ 126 "setenv get_cmd dhcp; " \ 127 "else " \ 128 "setenv get_cmd tftp; " \ 129 "fi; " \ 130 "if mmc dev ${mmcdev}; then " \ 131 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 132 "setexpr fw_sz ${filesize} / 0x200; " \ 133 "setexpr fw_sz ${fw_sz} + 1; " \ 134 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 135 "fi; " \ 136 "fi\0" \ 137 "update_sf_uboot=" \ 138 "if tftp $loadaddr $uboot; then " \ 139 "sf probe; " \ 140 "sf erase 0 0xC0000; " \ 141 "sf write $loadaddr 0x400 $filesize; " \ 142 "echo 'U-Boot upgraded. Please reset'; " \ 143 "fi\0" \ 144 "setargs=setenv bootargs console=${console},${baudrate} " \ 145 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \ 146 "loadbootscript=" \ 147 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ 148 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ 149 " source\0" \ 150 "loadimage=" \ 151 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ 152 "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ 153 "tryboot=" \ 154 "if run loadbootscript; then " \ 155 "run bootscript; " \ 156 "else " \ 157 "if run loadimage; then " \ 158 "run doboot; " \ 159 "fi; " \ 160 "fi;\0" \ 161 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ 162 "run setargs; " \ 163 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 164 "if run loadfdt; then " \ 165 "bootm ${loadaddr} - ${fdt_addr}; " \ 166 "else " \ 167 "if test ${boot_fdt} = try; then " \ 168 "bootm; " \ 169 "else " \ 170 "echo WARN: Cannot load the DT; " \ 171 "fi; " \ 172 "fi; " \ 173 "else " \ 174 "bootm; " \ 175 "fi;\0" \ 176 "netargs=setenv bootargs console=${console},${baudrate} " \ 177 "root=/dev/nfs " \ 178 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 179 "netboot=echo Booting from net ...; " \ 180 "run netargs; " \ 181 "if test ${ip_dyn} = yes; then " \ 182 "setenv get_cmd dhcp; " \ 183 "else " \ 184 "setenv get_cmd tftp; " \ 185 "fi; " \ 186 "${get_cmd} ${image}; " \ 187 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 188 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 189 "bootm ${loadaddr} - ${fdt_addr}; " \ 190 "else " \ 191 "if test ${boot_fdt} = try; then " \ 192 "bootm; " \ 193 "else " \ 194 "echo WARN: Cannot load the DT; " \ 195 "fi; " \ 196 "fi; " \ 197 "else " \ 198 "bootm; " \ 199 "fi;\0" \ 200 201 #define CONFIG_BOOTCOMMAND \ 202 "usb start; " \ 203 "setenv dev usb; " \ 204 "setenv devnum 0; " \ 205 "setenv rootdev sda${rfspart}; " \ 206 "run tryboot; " \ 207 \ 208 "setenv dev mmc; " \ 209 "setenv rootdev mmcblk0p${rfspart}; " \ 210 \ 211 "setenv devnum ${sddev}; " \ 212 "if mmc dev ${devnum}; then " \ 213 "run tryboot; " \ 214 "fi; " \ 215 \ 216 "setenv devnum ${emmcdev}; " \ 217 "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \ 218 "if mmc dev ${devnum}; then " \ 219 "run tryboot; " \ 220 "fi; " \ 221 \ 222 "bmode usb; " \ 223 224 #define CONFIG_ARP_TIMEOUT 200UL 225 226 /* Miscellaneous configurable options */ 227 #define CONFIG_SYS_LONGHELP 228 #define CONFIG_AUTO_COMPLETE 229 230 /* Print Buffer Size */ 231 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 232 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 233 234 #define CONFIG_SYS_MEMTEST_START 0x10000000 235 #define CONFIG_SYS_MEMTEST_END 0x10010000 236 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 237 238 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 239 240 #define CONFIG_CMDLINE_EDITING 241 #define CONFIG_STACKSIZE (128 * 1024) 242 243 /* Physical Memory Map */ 244 #define CONFIG_NR_DRAM_BANKS 1 245 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 246 247 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 248 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 249 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 250 251 #define CONFIG_SYS_INIT_SP_OFFSET \ 252 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 253 #define CONFIG_SYS_INIT_SP_ADDR \ 254 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 255 256 /* FLASH and environment organization */ 257 #define CONFIG_SYS_NO_FLASH 258 259 #define CONFIG_ENV_IS_IN_SPI_FLASH 260 #define CONFIG_ENV_SIZE (8 * 1024) 261 #define CONFIG_ENV_OFFSET (768 * 1024) 262 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 263 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 264 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 265 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 266 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 267 268 #ifndef CONFIG_SYS_DCACHE_OFF 269 #endif 270 271 #define CONFIG_SYS_FSL_USDHC_NUM 3 272 273 /* Framebuffer */ 274 #define CONFIG_VIDEO_IPUV3 275 #define CONFIG_VIDEO_BMP_RLE8 276 #define CONFIG_SPLASH_SCREEN 277 #define CONFIG_SPLASH_SCREEN_ALIGN 278 #define CONFIG_BMP_16BPP 279 #define CONFIG_VIDEO_LOGO 280 #define CONFIG_VIDEO_BMP_LOGO 281 #define CONFIG_IPUV3_CLK 260000000 282 #define CONFIG_IMX_HDMI 283 #define CONFIG_IMX_VIDEO_SKIP 284 285 #define CONFIG_PWM_IMX 286 #define CONFIG_IMX6_PWM_PER_CLK 66000000 287 288 #undef CONFIG_CMD_PCI 289 #ifdef CONFIG_CMD_PCI 290 #define CONFIG_PCI 291 #define CONFIG_PCI_PNP 292 #define CONFIG_PCI_SCAN_SHOW 293 #define CONFIG_PCIE_IMX 294 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 295 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) 296 #endif 297 298 /* I2C Configs */ 299 #define CONFIG_SYS_I2C 300 #define CONFIG_SYS_I2C_MXC 301 #define CONFIG_SYS_I2C_SPEED 100000 302 #define CONFIG_SYS_I2C_MXC_I2C1 303 #define CONFIG_SYS_I2C_MXC_I2C2 304 #define CONFIG_SYS_I2C_MXC_I2C3 305 306 #endif /* __ADVANTECH_DMSBA16_CONFIG_H */ 307