1 /* 2 * Copyright (C) 2016 Timesys Corporation 3 * Copyright (C) 2016 Advantech Corporation 4 * Copyright (C) 2012 Freescale Semiconductor, Inc. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H 10 #define __ADVANTECH_DMSBA16_CONFIG_H 11 12 #include <asm/arch/imx-regs.h> 13 #include <asm/imx-common/gpio.h> 14 15 #define CONFIG_BOARD_NAME "Advantech DMS-BA16" 16 17 #define CONFIG_MXC_UART_BASE UART4_BASE 18 #define CONSOLE_DEV "ttymxc3" 19 #define CONFIG_EXTRA_BOOTARGS "panic=10" 20 21 #define CONFIG_BOOT_DIR "" 22 #define CONFIG_LOADCMD "fatload" 23 #define CONFIG_RFSPART "2" 24 25 #define CONFIG_SUPPORT_EMMC_BOOT 26 27 #include "mx6_common.h" 28 #include <linux/sizes.h> 29 30 #define CONFIG_CMDLINE_TAG 31 #define CONFIG_SETUP_MEMORY_TAGS 32 #define CONFIG_INITRD_TAG 33 #define CONFIG_REVISION_TAG 34 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 35 36 #define CONFIG_MXC_GPIO 37 #define CONFIG_MXC_UART 38 39 #define CONFIG_CMD_FUSE 40 #define CONFIG_MXC_OCOTP 41 42 /* SATA Configs */ 43 #define CONFIG_CMD_SATA 44 #define CONFIG_DWC_AHSATA 45 #define CONFIG_SYS_SATA_MAX_DEVICE 1 46 #define CONFIG_DWC_AHSATA_PORT_ID 0 47 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 48 #define CONFIG_LBA48 49 #define CONFIG_LIBATA 50 51 /* MMC Configs */ 52 #define CONFIG_FSL_ESDHC 53 #define CONFIG_FSL_USDHC 54 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 55 #define CONFIG_BOUNCE_BUFFER 56 57 /* USB Configs */ 58 #define CONFIG_USB_STORAGE 59 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 60 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 61 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 62 #define CONFIG_MXC_USB_FLAGS 0 63 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP 64 65 #define CONFIG_USBD_HS 66 #define CONFIG_USB_FUNCTION_MASS_STORAGE 67 #define CONFIG_USB_GADGET_VBUS_DRAW 2 68 69 /* Networking Configs */ 70 #define CONFIG_FEC_MXC 71 #define CONFIG_MII 72 #define IMX_FEC_BASE ENET_BASE_ADDR 73 #define CONFIG_FEC_XCV_TYPE RGMII 74 #define CONFIG_ETHPRIME "FEC" 75 #define CONFIG_FEC_MXC_PHYADDR 4 76 #define CONFIG_PHYLIB 77 #define CONFIG_PHY_ATHEROS 78 79 /* Serial Flash */ 80 #ifdef CONFIG_CMD_SF 81 #define CONFIG_MXC_SPI 82 #define CONFIG_SF_DEFAULT_BUS 0 83 #define CONFIG_SF_DEFAULT_CS 0 84 #define CONFIG_SF_DEFAULT_SPEED 20000000 85 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 86 #endif 87 88 /* allow to overwrite serial and ethaddr */ 89 #define CONFIG_ENV_OVERWRITE 90 #define CONFIG_CONS_INDEX 1 91 92 #define CONFIG_LOADADDR 0x12000000 93 #define CONFIG_SYS_TEXT_BASE 0x17800000 94 95 #define CONFIG_EXTRA_ENV_SETTINGS \ 96 "script=boot.scr\0" \ 97 "image=" CONFIG_BOOT_DIR "/uImage\0" \ 98 "uboot=u-boot.imx\0" \ 99 "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \ 100 "fdt_addr=0x18000000\0" \ 101 "boot_fdt=yes\0" \ 102 "ip_dyn=yes\0" \ 103 "console=" CONSOLE_DEV "\0" \ 104 "fdt_high=0xffffffff\0" \ 105 "initrd_high=0xffffffff\0" \ 106 "sddev=0\0" \ 107 "emmcdev=1\0" \ 108 "partnum=1\0" \ 109 "loadcmd=" CONFIG_LOADCMD "\0" \ 110 "rfspart=" CONFIG_RFSPART "\0" \ 111 "update_sd_firmware=" \ 112 "if test ${ip_dyn} = yes; then " \ 113 "setenv get_cmd dhcp; " \ 114 "else " \ 115 "setenv get_cmd tftp; " \ 116 "fi; " \ 117 "if mmc dev ${mmcdev}; then " \ 118 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 119 "setexpr fw_sz ${filesize} / 0x200; " \ 120 "setexpr fw_sz ${fw_sz} + 1; " \ 121 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 122 "fi; " \ 123 "fi\0" \ 124 "update_sf_uboot=" \ 125 "if tftp $loadaddr $uboot; then " \ 126 "sf probe; " \ 127 "sf erase 0 0xC0000; " \ 128 "sf write $loadaddr 0x400 $filesize; " \ 129 "echo 'U-Boot upgraded. Please reset'; " \ 130 "fi\0" \ 131 "setargs=setenv bootargs console=${console},${baudrate} " \ 132 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \ 133 "loadbootscript=" \ 134 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \ 135 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \ 136 " source\0" \ 137 "loadimage=" \ 138 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \ 139 "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \ 140 "tryboot=" \ 141 "if run loadbootscript; then " \ 142 "run bootscript; " \ 143 "else " \ 144 "if run loadimage; then " \ 145 "run doboot; " \ 146 "fi; " \ 147 "fi;\0" \ 148 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \ 149 "run setargs; " \ 150 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 151 "if run loadfdt; then " \ 152 "bootm ${loadaddr} - ${fdt_addr}; " \ 153 "else " \ 154 "if test ${boot_fdt} = try; then " \ 155 "bootm; " \ 156 "else " \ 157 "echo WARN: Cannot load the DT; " \ 158 "fi; " \ 159 "fi; " \ 160 "else " \ 161 "bootm; " \ 162 "fi;\0" \ 163 "netargs=setenv bootargs console=${console},${baudrate} " \ 164 "root=/dev/nfs " \ 165 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 166 "netboot=echo Booting from net ...; " \ 167 "run netargs; " \ 168 "if test ${ip_dyn} = yes; then " \ 169 "setenv get_cmd dhcp; " \ 170 "else " \ 171 "setenv get_cmd tftp; " \ 172 "fi; " \ 173 "${get_cmd} ${image}; " \ 174 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 175 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 176 "bootm ${loadaddr} - ${fdt_addr}; " \ 177 "else " \ 178 "if test ${boot_fdt} = try; then " \ 179 "bootm; " \ 180 "else " \ 181 "echo WARN: Cannot load the DT; " \ 182 "fi; " \ 183 "fi; " \ 184 "else " \ 185 "bootm; " \ 186 "fi;\0" \ 187 188 #define CONFIG_BOOTCOMMAND \ 189 "usb start; " \ 190 "setenv dev usb; " \ 191 "setenv devnum 0; " \ 192 "setenv rootdev sda${rfspart}; " \ 193 "run tryboot; " \ 194 \ 195 "setenv dev mmc; " \ 196 "setenv rootdev mmcblk0p${rfspart}; " \ 197 \ 198 "setenv devnum ${sddev}; " \ 199 "if mmc dev ${devnum}; then " \ 200 "run tryboot; " \ 201 "fi; " \ 202 \ 203 "setenv devnum ${emmcdev}; " \ 204 "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \ 205 "if mmc dev ${devnum}; then " \ 206 "run tryboot; " \ 207 "fi; " \ 208 \ 209 "bmode usb; " \ 210 211 #define CONFIG_ARP_TIMEOUT 200UL 212 213 /* Miscellaneous configurable options */ 214 #define CONFIG_SYS_LONGHELP 215 #define CONFIG_AUTO_COMPLETE 216 217 /* Print Buffer Size */ 218 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 219 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 220 221 #define CONFIG_SYS_MEMTEST_START 0x10000000 222 #define CONFIG_SYS_MEMTEST_END 0x10010000 223 #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 224 225 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 226 227 #define CONFIG_CMDLINE_EDITING 228 229 /* Physical Memory Map */ 230 #define CONFIG_NR_DRAM_BANKS 1 231 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 232 233 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 234 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 235 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 236 237 #define CONFIG_SYS_INIT_SP_OFFSET \ 238 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 239 #define CONFIG_SYS_INIT_SP_ADDR \ 240 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 241 242 /* FLASH and environment organization */ 243 244 #define CONFIG_ENV_IS_IN_SPI_FLASH 245 #define CONFIG_ENV_SIZE (8 * 1024) 246 #define CONFIG_ENV_OFFSET (768 * 1024) 247 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 248 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 249 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 250 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 251 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 252 253 #ifndef CONFIG_SYS_DCACHE_OFF 254 #endif 255 256 #define CONFIG_SYS_FSL_USDHC_NUM 3 257 258 /* Framebuffer */ 259 #ifdef CONFIG_VIDEO 260 #define CONFIG_VIDEO_IPUV3 261 #define CONFIG_VIDEO_BMP_RLE8 262 #define CONFIG_SPLASH_SCREEN 263 #define CONFIG_SPLASH_SCREEN_ALIGN 264 #define CONFIG_BMP_16BPP 265 #define CONFIG_VIDEO_LOGO 266 #define CONFIG_VIDEO_BMP_LOGO 267 #define CONFIG_IPUV3_CLK 260000000 268 #define CONFIG_IMX_HDMI 269 #define CONFIG_IMX_VIDEO_SKIP 270 #endif 271 272 #define CONFIG_PWM_IMX 273 #define CONFIG_IMX6_PWM_PER_CLK 66000000 274 275 #undef CONFIG_CMD_PCI 276 #ifdef CONFIG_CMD_PCI 277 #define CONFIG_PCI_SCAN_SHOW 278 #define CONFIG_PCIE_IMX 279 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) 280 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5) 281 #endif 282 283 /* I2C Configs */ 284 #define CONFIG_SYS_I2C 285 #define CONFIG_SYS_I2C_MXC 286 #define CONFIG_SYS_I2C_SPEED 100000 287 #define CONFIG_SYS_I2C_MXC_I2C1 288 #define CONFIG_SYS_I2C_MXC_I2C2 289 #define CONFIG_SYS_I2C_MXC_I2C3 290 291 #endif /* __ADVANTECH_DMSBA16_CONFIG_H */ 292