1 /* 2 * Copyright (C) 2011 Andes Technology Corporation 3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> 4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include <asm/arch/ag101.h> 13 14 /* 15 * CPU and Board Configuration Options 16 */ 17 #define CONFIG_ADP_AG101P 18 19 #define CONFIG_USE_INTERRUPT 20 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 /* 24 * Definitions related to passing arguments to kernel. 25 */ 26 #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ 27 #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ 28 #define CONFIG_INITRD_TAG /* send initrd params */ 29 30 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 31 #define CONFIG_MEM_REMAP 32 #endif 33 34 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 35 #define CONFIG_SYS_TEXT_BASE 0x03200000 36 #else 37 #define CONFIG_SYS_TEXT_BASE 0x00000000 38 #endif 39 40 /* 41 * Timer 42 */ 43 #define CONFIG_SYS_CLK_FREQ 39062500 44 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ 45 46 /* 47 * Use Externel CLOCK or PCLK 48 */ 49 #undef CONFIG_FTRTC010_EXTCLK 50 51 #ifndef CONFIG_FTRTC010_EXTCLK 52 #define CONFIG_FTRTC010_PCLK 53 #endif 54 55 #ifdef CONFIG_FTRTC010_EXTCLK 56 #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ 57 #else 58 #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ 59 #endif 60 61 #define TIMER_LOAD_VAL 0xffffffff 62 63 /* 64 * Real Time Clock 65 */ 66 #define CONFIG_RTC_FTRTC010 67 68 /* 69 * Real Time Clock Divider 70 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) 71 */ 72 #define OSC_5MHZ (5*1000000) 73 #define OSC_CLK (4*OSC_5MHZ) 74 #define RTC_DIV_COUNT (0.5) /* Why?? */ 75 76 /* 77 * Serial console configuration 78 */ 79 80 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ 81 #define CONFIG_BAUDRATE 38400 82 #define CONFIG_CONS_INDEX 1 83 #define CONFIG_SYS_NS16550 84 #define CONFIG_SYS_NS16550_SERIAL 85 #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE 86 #define CONFIG_SYS_NS16550_REG_SIZE -4 87 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ 88 89 /* 90 * Ethernet 91 */ 92 #define CONFIG_FTMAC100 93 94 #define CONFIG_BOOTDELAY 3 95 96 /* 97 * SD (MMC) controller 98 */ 99 #define CONFIG_MMC 100 #define CONFIG_CMD_MMC 101 #define CONFIG_GENERIC_MMC 102 #define CONFIG_DOS_PARTITION 103 #define CONFIG_FTSDC010 104 #define CONFIG_FTSDC010_NUMBER 1 105 #define CONFIG_FTSDC010_SDIO 106 #define CONFIG_CMD_FAT 107 #define CONFIG_CMD_EXT2 108 109 /* 110 * Command line configuration. 111 */ 112 #include <config_cmd_default.h> 113 114 #define CONFIG_CMD_CACHE 115 #define CONFIG_CMD_DATE 116 #define CONFIG_CMD_PING 117 118 /* 119 * Miscellaneous configurable options 120 */ 121 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 122 #define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ 123 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 124 125 /* Print Buffer Size */ 126 #define CONFIG_SYS_PBSIZE \ 127 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 128 129 /* max number of command args */ 130 #define CONFIG_SYS_MAXARGS 16 131 132 /* Boot Argument Buffer Size */ 133 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 134 135 /* 136 * Size of malloc() pool 137 */ 138 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ 139 #define CONFIG_SYS_MALLOC_LEN (512 << 10) 140 141 /* 142 * size in bytes reserved for initial data 143 */ 144 #define CONFIG_SYS_GBL_DATA_SIZE 128 145 146 /* 147 * AHB Controller configuration 148 */ 149 #define CONFIG_FTAHBC020S 150 151 #ifdef CONFIG_FTAHBC020S 152 #include <faraday/ftahbc020s.h> 153 154 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ 155 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 156 157 /* 158 * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, 159 * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote 160 * in C language. 161 */ 162 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ 163 (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ 164 FTAHBC020S_SLAVE_BSR_SIZE(0xb)) 165 #endif 166 167 /* 168 * Watchdog 169 */ 170 #define CONFIG_FTWDT010_WATCHDOG 171 172 /* 173 * PMU Power controller configuration 174 */ 175 #define CONFIG_PMU 176 #define CONFIG_FTPMU010_POWER 177 178 #ifdef CONFIG_FTPMU010_POWER 179 #include <faraday/ftpmu010.h> 180 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E 181 #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ 182 FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ 183 FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ 184 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ 185 FTPMU010_SDRAMHTC_CKE_DCSR | \ 186 FTPMU010_SDRAMHTC_DQM_DCSR | \ 187 FTPMU010_SDRAMHTC_SDCLK_DCSR) 188 #endif 189 190 /* 191 * SDRAM controller configuration 192 */ 193 #define CONFIG_FTSDMC021 194 195 #ifdef CONFIG_FTSDMC021 196 #include <faraday/ftsdmc021.h> 197 198 #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ 199 FTSDMC021_TP1_TRP(1) | \ 200 FTSDMC021_TP1_TRCD(1) | \ 201 FTSDMC021_TP1_TRF(3) | \ 202 FTSDMC021_TP1_TWR(1) | \ 203 FTSDMC021_TP1_TCL(2)) 204 205 #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ 206 FTSDMC021_TP2_INI_REFT(8) | \ 207 FTSDMC021_TP2_REF_INTV(0x180)) 208 209 /* 210 * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, 211 * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in 212 * C language. 213 */ 214 #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ 215 FTSDMC021_CR1_DSZ(3) | \ 216 FTSDMC021_CR1_MBW(2) | \ 217 FTSDMC021_CR1_BNKSIZE(6)) 218 219 #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ 220 FTSDMC021_CR2_IREF | \ 221 FTSDMC021_CR2_ISMR) 222 223 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 224 #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ 225 CONFIG_SYS_FTSDMC021_BANK0_BASE) 226 227 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ 228 (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) 229 #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ 230 CONFIG_SYS_FTSDMC021_BANK1_BASE) 231 #endif 232 233 /* 234 * Physical Memory Map 235 */ 236 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) 237 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ 238 #if defined(CONFIG_MEM_REMAP) 239 #define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/ 240 #endif 241 #else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ 242 #define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */ 243 #endif 244 #define PHYS_SDRAM_1 \ 245 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ 246 247 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ 248 #define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */ 249 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 250 251 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 252 253 #ifdef CONFIG_MEM_REMAP 254 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ 255 GENERATED_GBL_DATA_SIZE) 256 #else 257 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 258 GENERATED_GBL_DATA_SIZE) 259 #endif /* CONFIG_MEM_REMAP */ 260 261 /* 262 * Load address and memory test area should agree with 263 * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. 264 */ 265 #define CONFIG_SYS_LOAD_ADDR 0x300000 266 267 /* memtest works on 63 MB in DRAM */ 268 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 269 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) 270 271 /* 272 * Static memory controller configuration 273 */ 274 #define CONFIG_FTSMC020 275 276 #ifdef CONFIG_FTSMC020 277 #include <faraday/ftsmc020.h> 278 279 #define CONFIG_SYS_FTSMC020_CONFIGS { \ 280 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ 281 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ 282 } 283 284 #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ 285 #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ 286 FTSMC020_BANK_SIZE_32M | \ 287 FTSMC020_BANK_MBW_32) 288 289 #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ 290 FTSMC020_TPR_AST(1) | \ 291 FTSMC020_TPR_CTW(1) | \ 292 FTSMC020_TPR_ATI(1) | \ 293 FTSMC020_TPR_AT2(1) | \ 294 FTSMC020_TPR_WTC(1) | \ 295 FTSMC020_TPR_AHT(1) | \ 296 FTSMC020_TPR_TRNA(1)) 297 #endif 298 299 /* 300 * FLASH on ADP_AG101P is connected to BANK0 301 * Just disalbe the other BANK to avoid detection error. 302 */ 303 #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ 304 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ 305 FTSMC020_BANK_SIZE_32M | \ 306 FTSMC020_BANK_MBW_32) 307 308 #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ 309 FTSMC020_TPR_CTW(3) | \ 310 FTSMC020_TPR_ATI(0xf) | \ 311 FTSMC020_TPR_AT2(3) | \ 312 FTSMC020_TPR_WTC(3) | \ 313 FTSMC020_TPR_AHT(3) | \ 314 FTSMC020_TPR_TRNA(0xf)) 315 316 #define FTSMC020_BANK1_CONFIG (0x00) 317 #define FTSMC020_BANK1_TIMING (0x00) 318 #endif /* CONFIG_FTSMC020 */ 319 320 /* 321 * FLASH and environment organization 322 */ 323 /* use CFI framework */ 324 #define CONFIG_SYS_FLASH_CFI 325 #define CONFIG_FLASH_CFI_DRIVER 326 327 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 328 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 329 330 /* support JEDEC */ 331 332 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ 333 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 334 #define PHYS_FLASH_1 0x80400000 /* BANK 1 */ 335 #else /* !CONFIG_SKIP_LOWLEVEL_INIT */ 336 #ifdef CONFIG_MEM_REMAP 337 #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ 338 #else 339 #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ 340 #endif /* CONFIG_MEM_REMAP */ 341 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ 342 343 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 344 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } 345 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 346 347 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ 348 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ 349 350 /* max number of memory banks */ 351 /* 352 * There are 4 banks supported for this Controller, 353 * but we have only 1 bank connected to flash on board 354 */ 355 #define CONFIG_SYS_MAX_FLASH_BANKS 1 356 357 /* max number of sectors on one chip */ 358 #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2) 359 #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE 360 #define CONFIG_SYS_MAX_FLASH_SECT 128 361 362 /* environments */ 363 #define CONFIG_ENV_IS_IN_FLASH 364 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) 365 #define CONFIG_ENV_SIZE 8192 366 #define CONFIG_ENV_OVERWRITE 367 368 #endif /* __CONFIG_H */ 369