1 /* 2 * Copyright (C) 2011 Andes Technology Corporation 3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> 4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include <asm/arch-ag101/ag101.h> 13 14 /* 15 * CPU and Board Configuration Options 16 */ 17 #define CONFIG_ADP_AG101P 18 19 #define CONFIG_USE_INTERRUPT 20 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 #define CONFIG_SYS_GENERIC_GLOBAL_DATA 24 25 /* 26 * Definitions related to passing arguments to kernel. 27 */ 28 #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ 29 #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ 30 #define CONFIG_INITRD_TAG /* send initrd params */ 31 #define CONFIG_NEEDS_MANUAL_RELOC 32 33 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 34 #define CONFIG_MEM_REMAP 35 #endif 36 37 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 38 #define CONFIG_SYS_TEXT_BASE 0x00500000 39 #else 40 #ifdef CONFIG_MEM_REMAP 41 #define CONFIG_SYS_TEXT_BASE 0x80000000 42 #else 43 #define CONFIG_SYS_TEXT_BASE 0x00000000 44 #endif 45 #endif 46 47 /* 48 * Timer 49 */ 50 #define CONFIG_SYS_CLK_FREQ 39062500 51 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ 52 53 /* 54 * Use Externel CLOCK or PCLK 55 */ 56 #undef CONFIG_FTRTC010_EXTCLK 57 58 #ifndef CONFIG_FTRTC010_EXTCLK 59 #define CONFIG_FTRTC010_PCLK 60 #endif 61 62 #ifdef CONFIG_FTRTC010_EXTCLK 63 #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ 64 #else 65 #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ 66 #endif 67 68 #define TIMER_LOAD_VAL 0xffffffff 69 70 /* 71 * Real Time Clock 72 */ 73 #define CONFIG_RTC_FTRTC010 74 75 /* 76 * Real Time Clock Divider 77 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) 78 */ 79 #define OSC_5MHZ (5*1000000) 80 #define OSC_CLK (4*OSC_5MHZ) 81 #define RTC_DIV_COUNT (0.5) /* Why?? */ 82 83 /* 84 * Serial console configuration 85 */ 86 87 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ 88 #define CONFIG_BAUDRATE 38400 89 #define CONFIG_CONS_INDEX 1 90 #define CONFIG_SYS_NS16550_SERIAL 91 #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE 92 #define CONFIG_SYS_NS16550_REG_SIZE -4 93 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ 94 95 /* 96 * Ethernet 97 */ 98 #define CONFIG_FTMAC100 99 100 #define CONFIG_BOOTDELAY 3 101 102 /* 103 * SD (MMC) controller 104 */ 105 #define CONFIG_MMC 106 #define CONFIG_CMD_MMC 107 #define CONFIG_GENERIC_MMC 108 #define CONFIG_DOS_PARTITION 109 #define CONFIG_FTSDC010 110 #define CONFIG_FTSDC010_NUMBER 1 111 #define CONFIG_FTSDC010_SDIO 112 #define CONFIG_CMD_FAT 113 #define CONFIG_CMD_EXT2 114 115 /* 116 * Command line configuration. 117 */ 118 #define CONFIG_CMD_CACHE 119 #define CONFIG_CMD_DATE 120 #define CONFIG_CMD_PING 121 122 /* 123 * Miscellaneous configurable options 124 */ 125 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 126 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 127 128 /* Print Buffer Size */ 129 #define CONFIG_SYS_PBSIZE \ 130 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 131 132 /* max number of command args */ 133 #define CONFIG_SYS_MAXARGS 16 134 135 /* Boot Argument Buffer Size */ 136 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 137 138 /* 139 * Size of malloc() pool 140 */ 141 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ 142 #define CONFIG_SYS_MALLOC_LEN (512 << 10) 143 144 /* 145 * AHB Controller configuration 146 */ 147 #define CONFIG_FTAHBC020S 148 149 #ifdef CONFIG_FTAHBC020S 150 #include <faraday/ftahbc020s.h> 151 152 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ 153 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 154 155 /* 156 * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, 157 * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote 158 * in C language. 159 */ 160 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ 161 (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ 162 FTAHBC020S_SLAVE_BSR_SIZE(0xb)) 163 #endif 164 165 /* 166 * Watchdog 167 */ 168 #define CONFIG_FTWDT010_WATCHDOG 169 170 /* 171 * PMU Power controller configuration 172 */ 173 #define CONFIG_PMU 174 #define CONFIG_FTPMU010_POWER 175 176 #ifdef CONFIG_FTPMU010_POWER 177 #include <faraday/ftpmu010.h> 178 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E 179 #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ 180 FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ 181 FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ 182 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ 183 FTPMU010_SDRAMHTC_CKE_DCSR | \ 184 FTPMU010_SDRAMHTC_DQM_DCSR | \ 185 FTPMU010_SDRAMHTC_SDCLK_DCSR) 186 #endif 187 188 /* 189 * SDRAM controller configuration 190 */ 191 #define CONFIG_FTSDMC021 192 193 #ifdef CONFIG_FTSDMC021 194 #include <faraday/ftsdmc021.h> 195 196 #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ 197 FTSDMC021_TP1_TRP(1) | \ 198 FTSDMC021_TP1_TRCD(1) | \ 199 FTSDMC021_TP1_TRF(3) | \ 200 FTSDMC021_TP1_TWR(1) | \ 201 FTSDMC021_TP1_TCL(2)) 202 203 #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ 204 FTSDMC021_TP2_INI_REFT(8) | \ 205 FTSDMC021_TP2_REF_INTV(0x180)) 206 207 /* 208 * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, 209 * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in 210 * C language. 211 */ 212 #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ 213 FTSDMC021_CR1_DSZ(3) | \ 214 FTSDMC021_CR1_MBW(2) | \ 215 FTSDMC021_CR1_BNKSIZE(6)) 216 217 #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ 218 FTSDMC021_CR2_IREF | \ 219 FTSDMC021_CR2_ISMR) 220 221 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 222 #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ 223 CONFIG_SYS_FTSDMC021_BANK0_BASE) 224 225 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ 226 (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) 227 #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ 228 CONFIG_SYS_FTSDMC021_BANK1_BASE) 229 #endif 230 231 /* 232 * Physical Memory Map 233 */ 234 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 235 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ 236 #else 237 #ifdef CONFIG_MEM_REMAP 238 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ 239 #else 240 #define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ 241 #endif 242 #endif 243 244 #define PHYS_SDRAM_1 \ 245 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ 246 247 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ 248 249 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 250 #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ 251 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ 252 #else 253 #ifdef CONFIG_MEM_REMAP 254 #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ 255 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ 256 #else 257 #define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */ 258 #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ 259 #endif 260 #endif 261 262 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 263 264 #ifdef CONFIG_MEM_REMAP 265 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ 266 GENERATED_GBL_DATA_SIZE) 267 #else 268 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 269 GENERATED_GBL_DATA_SIZE) 270 #endif /* CONFIG_MEM_REMAP */ 271 272 /* 273 * Load address and memory test area should agree with 274 * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. 275 */ 276 #define CONFIG_SYS_LOAD_ADDR 0x300000 277 278 /* memtest works on 63 MB in DRAM */ 279 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 280 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) 281 282 /* 283 * Static memory controller configuration 284 */ 285 #define CONFIG_FTSMC020 286 287 #ifdef CONFIG_FTSMC020 288 #include <faraday/ftsmc020.h> 289 290 #define CONFIG_SYS_FTSMC020_CONFIGS { \ 291 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ 292 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ 293 } 294 295 #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ 296 #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ 297 FTSMC020_BANK_SIZE_32M | \ 298 FTSMC020_BANK_MBW_32) 299 300 #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ 301 FTSMC020_TPR_AST(1) | \ 302 FTSMC020_TPR_CTW(1) | \ 303 FTSMC020_TPR_ATI(1) | \ 304 FTSMC020_TPR_AT2(1) | \ 305 FTSMC020_TPR_WTC(1) | \ 306 FTSMC020_TPR_AHT(1) | \ 307 FTSMC020_TPR_TRNA(1)) 308 #endif 309 310 /* 311 * FLASH on ADP_AG101P is connected to BANK0 312 * Just disalbe the other BANK to avoid detection error. 313 */ 314 #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ 315 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ 316 FTSMC020_BANK_SIZE_32M | \ 317 FTSMC020_BANK_MBW_32) 318 319 #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ 320 FTSMC020_TPR_CTW(3) | \ 321 FTSMC020_TPR_ATI(0xf) | \ 322 FTSMC020_TPR_AT2(3) | \ 323 FTSMC020_TPR_WTC(3) | \ 324 FTSMC020_TPR_AHT(3) | \ 325 FTSMC020_TPR_TRNA(0xf)) 326 327 #define FTSMC020_BANK1_CONFIG (0x00) 328 #define FTSMC020_BANK1_TIMING (0x00) 329 #endif /* CONFIG_FTSMC020 */ 330 331 /* 332 * FLASH and environment organization 333 */ 334 /* use CFI framework */ 335 #define CONFIG_SYS_FLASH_CFI 336 #define CONFIG_FLASH_CFI_DRIVER 337 338 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 339 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 340 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL 341 342 /* support JEDEC */ 343 344 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ 345 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 346 #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ 347 #else 348 #ifdef CONFIG_MEM_REMAP 349 #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ 350 #else 351 #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ 352 #endif 353 #endif /* CONFIG_MEM_REMAP */ 354 355 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 356 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } 357 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 358 359 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ 360 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ 361 362 /* max number of memory banks */ 363 /* 364 * There are 4 banks supported for this Controller, 365 * but we have only 1 bank connected to flash on board 366 */ 367 #define CONFIG_SYS_MAX_FLASH_BANKS 1 368 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} 369 370 /* max number of sectors on one chip */ 371 #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) 372 #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE 373 #define CONFIG_SYS_MAX_FLASH_SECT 512 374 375 /* environments */ 376 #define CONFIG_ENV_IS_IN_FLASH 377 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) 378 #define CONFIG_ENV_SIZE 8192 379 #define CONFIG_ENV_OVERWRITE 380 381 #endif /* __CONFIG_H */ 382