1 /* 2 * Copyright (C) 2011 Andes Technology Corporation 3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> 4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include <asm/arch-ag101/ag101.h> 13 14 /* 15 * CPU and Board Configuration Options 16 */ 17 #define CONFIG_ADP_AG101P 18 19 #define CONFIG_USE_INTERRUPT 20 21 #define CONFIG_SKIP_LOWLEVEL_INIT 22 23 /* 24 * Definitions related to passing arguments to kernel. 25 */ 26 #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ 27 #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ 28 #define CONFIG_INITRD_TAG /* send initrd params */ 29 30 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 31 #define CONFIG_MEM_REMAP 32 #endif 33 34 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 35 #define CONFIG_SYS_TEXT_BASE 0x03200000 36 #else 37 #define CONFIG_SYS_TEXT_BASE 0x00000000 38 #endif 39 40 /* 41 * Timer 42 */ 43 #define CONFIG_SYS_CLK_FREQ 39062500 44 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ 45 46 /* 47 * Use Externel CLOCK or PCLK 48 */ 49 #undef CONFIG_FTRTC010_EXTCLK 50 51 #ifndef CONFIG_FTRTC010_EXTCLK 52 #define CONFIG_FTRTC010_PCLK 53 #endif 54 55 #ifdef CONFIG_FTRTC010_EXTCLK 56 #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ 57 #else 58 #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ 59 #endif 60 61 #define TIMER_LOAD_VAL 0xffffffff 62 63 /* 64 * Real Time Clock 65 */ 66 #define CONFIG_RTC_FTRTC010 67 68 /* 69 * Real Time Clock Divider 70 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) 71 */ 72 #define OSC_5MHZ (5*1000000) 73 #define OSC_CLK (4*OSC_5MHZ) 74 #define RTC_DIV_COUNT (0.5) /* Why?? */ 75 76 /* 77 * Serial console configuration 78 */ 79 80 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ 81 #define CONFIG_BAUDRATE 38400 82 #define CONFIG_CONS_INDEX 1 83 #define CONFIG_SYS_NS16550 84 #define CONFIG_SYS_NS16550_SERIAL 85 #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE 86 #define CONFIG_SYS_NS16550_REG_SIZE -4 87 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ 88 89 /* 90 * Ethernet 91 */ 92 #define CONFIG_FTMAC100 93 94 #define CONFIG_BOOTDELAY 3 95 96 /* 97 * SD (MMC) controller 98 */ 99 #define CONFIG_MMC 100 #define CONFIG_CMD_MMC 101 #define CONFIG_GENERIC_MMC 102 #define CONFIG_DOS_PARTITION 103 #define CONFIG_FTSDC010 104 #define CONFIG_FTSDC010_NUMBER 1 105 #define CONFIG_FTSDC010_SDIO 106 #define CONFIG_CMD_FAT 107 #define CONFIG_CMD_EXT2 108 109 /* 110 * Command line configuration. 111 */ 112 #define CONFIG_CMD_CACHE 113 #define CONFIG_CMD_DATE 114 #define CONFIG_CMD_PING 115 116 /* 117 * Miscellaneous configurable options 118 */ 119 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 120 #define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ 121 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 122 123 /* Print Buffer Size */ 124 #define CONFIG_SYS_PBSIZE \ 125 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 126 127 /* max number of command args */ 128 #define CONFIG_SYS_MAXARGS 16 129 130 /* Boot Argument Buffer Size */ 131 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 132 133 /* 134 * Size of malloc() pool 135 */ 136 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ 137 #define CONFIG_SYS_MALLOC_LEN (512 << 10) 138 139 /* 140 * AHB Controller configuration 141 */ 142 #define CONFIG_FTAHBC020S 143 144 #ifdef CONFIG_FTAHBC020S 145 #include <faraday/ftahbc020s.h> 146 147 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ 148 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 149 150 /* 151 * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, 152 * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote 153 * in C language. 154 */ 155 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ 156 (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ 157 FTAHBC020S_SLAVE_BSR_SIZE(0xb)) 158 #endif 159 160 /* 161 * Watchdog 162 */ 163 #define CONFIG_FTWDT010_WATCHDOG 164 165 /* 166 * PMU Power controller configuration 167 */ 168 #define CONFIG_PMU 169 #define CONFIG_FTPMU010_POWER 170 171 #ifdef CONFIG_FTPMU010_POWER 172 #include <faraday/ftpmu010.h> 173 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E 174 #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ 175 FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ 176 FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ 177 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ 178 FTPMU010_SDRAMHTC_CKE_DCSR | \ 179 FTPMU010_SDRAMHTC_DQM_DCSR | \ 180 FTPMU010_SDRAMHTC_SDCLK_DCSR) 181 #endif 182 183 /* 184 * SDRAM controller configuration 185 */ 186 #define CONFIG_FTSDMC021 187 188 #ifdef CONFIG_FTSDMC021 189 #include <faraday/ftsdmc021.h> 190 191 #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ 192 FTSDMC021_TP1_TRP(1) | \ 193 FTSDMC021_TP1_TRCD(1) | \ 194 FTSDMC021_TP1_TRF(3) | \ 195 FTSDMC021_TP1_TWR(1) | \ 196 FTSDMC021_TP1_TCL(2)) 197 198 #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ 199 FTSDMC021_TP2_INI_REFT(8) | \ 200 FTSDMC021_TP2_REF_INTV(0x180)) 201 202 /* 203 * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, 204 * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in 205 * C language. 206 */ 207 #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ 208 FTSDMC021_CR1_DSZ(3) | \ 209 FTSDMC021_CR1_MBW(2) | \ 210 FTSDMC021_CR1_BNKSIZE(6)) 211 212 #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ 213 FTSDMC021_CR2_IREF | \ 214 FTSDMC021_CR2_ISMR) 215 216 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 217 #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ 218 CONFIG_SYS_FTSDMC021_BANK0_BASE) 219 220 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ 221 (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) 222 #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ 223 CONFIG_SYS_FTSDMC021_BANK1_BASE) 224 #endif 225 226 /* 227 * Physical Memory Map 228 */ 229 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) 230 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ 231 #if defined(CONFIG_MEM_REMAP) 232 #define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/ 233 #endif 234 #else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ 235 #define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */ 236 #endif 237 #define PHYS_SDRAM_1 \ 238 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ 239 240 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ 241 #define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */ 242 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 243 244 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 245 246 #ifdef CONFIG_MEM_REMAP 247 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ 248 GENERATED_GBL_DATA_SIZE) 249 #else 250 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 251 GENERATED_GBL_DATA_SIZE) 252 #endif /* CONFIG_MEM_REMAP */ 253 254 /* 255 * Load address and memory test area should agree with 256 * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. 257 */ 258 #define CONFIG_SYS_LOAD_ADDR 0x300000 259 260 /* memtest works on 63 MB in DRAM */ 261 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 262 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) 263 264 /* 265 * Static memory controller configuration 266 */ 267 #define CONFIG_FTSMC020 268 269 #ifdef CONFIG_FTSMC020 270 #include <faraday/ftsmc020.h> 271 272 #define CONFIG_SYS_FTSMC020_CONFIGS { \ 273 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ 274 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ 275 } 276 277 #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ 278 #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ 279 FTSMC020_BANK_SIZE_32M | \ 280 FTSMC020_BANK_MBW_32) 281 282 #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ 283 FTSMC020_TPR_AST(1) | \ 284 FTSMC020_TPR_CTW(1) | \ 285 FTSMC020_TPR_ATI(1) | \ 286 FTSMC020_TPR_AT2(1) | \ 287 FTSMC020_TPR_WTC(1) | \ 288 FTSMC020_TPR_AHT(1) | \ 289 FTSMC020_TPR_TRNA(1)) 290 #endif 291 292 /* 293 * FLASH on ADP_AG101P is connected to BANK0 294 * Just disalbe the other BANK to avoid detection error. 295 */ 296 #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ 297 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ 298 FTSMC020_BANK_SIZE_32M | \ 299 FTSMC020_BANK_MBW_32) 300 301 #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ 302 FTSMC020_TPR_CTW(3) | \ 303 FTSMC020_TPR_ATI(0xf) | \ 304 FTSMC020_TPR_AT2(3) | \ 305 FTSMC020_TPR_WTC(3) | \ 306 FTSMC020_TPR_AHT(3) | \ 307 FTSMC020_TPR_TRNA(0xf)) 308 309 #define FTSMC020_BANK1_CONFIG (0x00) 310 #define FTSMC020_BANK1_TIMING (0x00) 311 #endif /* CONFIG_FTSMC020 */ 312 313 /* 314 * FLASH and environment organization 315 */ 316 /* use CFI framework */ 317 #define CONFIG_SYS_FLASH_CFI 318 #define CONFIG_FLASH_CFI_DRIVER 319 320 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 321 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 322 323 /* support JEDEC */ 324 325 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ 326 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 327 #define PHYS_FLASH_1 0x80400000 /* BANK 1 */ 328 #else /* !CONFIG_SKIP_LOWLEVEL_INIT */ 329 #ifdef CONFIG_MEM_REMAP 330 #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ 331 #else 332 #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ 333 #endif /* CONFIG_MEM_REMAP */ 334 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ 335 336 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 337 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } 338 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 339 340 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ 341 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ 342 343 /* max number of memory banks */ 344 /* 345 * There are 4 banks supported for this Controller, 346 * but we have only 1 bank connected to flash on board 347 */ 348 #define CONFIG_SYS_MAX_FLASH_BANKS 1 349 350 /* max number of sectors on one chip */ 351 #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2) 352 #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE 353 #define CONFIG_SYS_MAX_FLASH_SECT 128 354 355 /* environments */ 356 #define CONFIG_ENV_IS_IN_FLASH 357 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) 358 #define CONFIG_ENV_SIZE 8192 359 #define CONFIG_ENV_OVERWRITE 360 361 #endif /* __CONFIG_H */ 362