1 /* 2 * Copyright 2013-2015 Arcturus Networks, Inc. 3 * http://www.arcturusnetworks.com/products/ucp1020/ 4 * based on include/configs/p1_p2_rdb_pc.h 5 * original copyright follows: 6 * Copyright 2009-2011 Freescale Semiconductor, Inc. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 /* 12 * QorIQ uCP1020-xx boards configuration file 13 */ 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 18 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 19 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 20 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 21 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 22 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 23 24 #if defined(CONFIG_TARTGET_UCP1020T1) 25 26 #define CONFIG_UCP1020_REV_1_3 27 28 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1" 29 30 #define CONFIG_TSEC_ENET 31 #define CONFIG_TSEC1 32 #define CONFIG_TSEC3 33 #define CONFIG_HAS_ETH0 34 #define CONFIG_HAS_ETH1 35 #define CONFIG_ETHADDR 00:19:D3:FF:FF:FF 36 #define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE 37 #define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD 38 #define CONFIG_IPADDR 10.80.41.229 39 #define CONFIG_SERVERIP 10.80.41.227 40 #define CONFIG_NETMASK 255.255.252.0 41 #define CONFIG_ETHPRIME "eTSEC3" 42 43 #ifndef CONFIG_SPI_FLASH 44 #endif 45 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 46 47 #define CONFIG_SYS_L2_SIZE (256 << 10) 48 49 #define CONFIG_LAST_STAGE_INIT 50 51 #endif 52 53 #if defined(CONFIG_TARGET_UCP1020) 54 55 #define CONFIG_UCP1020 56 #define CONFIG_UCP1020_REV_1_3 57 58 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR" 59 60 #define CONFIG_TSEC_ENET 61 #define CONFIG_TSEC1 62 #define CONFIG_TSEC2 63 #define CONFIG_TSEC3 64 #define CONFIG_HAS_ETH0 65 #define CONFIG_HAS_ETH1 66 #define CONFIG_HAS_ETH2 67 #define CONFIG_ETHADDR 00:06:3B:FF:FF:FF 68 #define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE 69 #define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD 70 #define CONFIG_IPADDR 192.168.1.81 71 #define CONFIG_IPADDR1 192.168.1.82 72 #define CONFIG_IPADDR2 192.168.1.83 73 #define CONFIG_SERVERIP 192.168.1.80 74 #define CONFIG_GATEWAYIP 102.168.1.1 75 #define CONFIG_NETMASK 255.255.255.0 76 #define CONFIG_ETHPRIME "eTSEC1" 77 78 #ifndef CONFIG_SPI_FLASH 79 #endif 80 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 81 82 #define CONFIG_SYS_L2_SIZE (256 << 10) 83 84 #define CONFIG_LAST_STAGE_INIT 85 86 #endif 87 88 #ifdef CONFIG_SDCARD 89 #define CONFIG_RAMBOOT_SDCARD 90 #define CONFIG_SYS_RAMBOOT 91 #define CONFIG_SYS_EXTRA_ENV_RELOC 92 #define CONFIG_SYS_TEXT_BASE 0x11000000 93 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 94 #endif 95 96 #ifdef CONFIG_SPIFLASH 97 #define CONFIG_RAMBOOT_SPIFLASH 98 #define CONFIG_SYS_RAMBOOT 99 #define CONFIG_SYS_EXTRA_ENV_RELOC 100 #define CONFIG_SYS_TEXT_BASE 0x11000000 101 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 102 #endif 103 104 #ifndef CONFIG_SYS_TEXT_BASE 105 #define CONFIG_SYS_TEXT_BASE 0xeff80000 106 #endif 107 #define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000 108 109 #ifndef CONFIG_RESET_VECTOR_ADDRESS 110 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 111 #endif 112 113 #ifndef CONFIG_SYS_MONITOR_BASE 114 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 115 #endif 116 117 #define CONFIG_MP 118 119 #define CONFIG_ENV_OVERWRITE 120 121 #define CONFIG_SYS_SATA_MAX_DEVICE 2 122 #define CONFIG_LBA48 123 124 #define CONFIG_SYS_CLK_FREQ 66666666 125 #define CONFIG_DDR_CLK_FREQ 66666666 126 127 #define CONFIG_HWCONFIG 128 129 /* 130 * These can be toggled for performance analysis, otherwise use default. 131 */ 132 #define CONFIG_L2_CACHE 133 #define CONFIG_BTB 134 135 #define CONFIG_ENABLE_36BIT_PHYS 136 137 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 138 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 139 140 #define CONFIG_SYS_CCSRBAR 0xffe00000 141 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 142 143 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 144 SPL code*/ 145 #ifdef CONFIG_SPL_BUILD 146 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 147 #endif 148 149 /* DDR Setup */ 150 #define CONFIG_DDR_ECC_ENABLE 151 #ifndef CONFIG_DDR_ECC_ENABLE 152 #define CONFIG_SYS_DDR_RAW_TIMING 153 #define CONFIG_DDR_SPD 154 #endif 155 #define CONFIG_SYS_SPD_BUS_NUM 1 156 #undef CONFIG_FSL_DDR_INTERACTIVE 157 158 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M 159 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 160 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) 161 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 162 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 163 164 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 165 166 /* Default settings for DDR3 */ 167 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 168 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 169 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 170 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f 171 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 172 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 173 174 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 175 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 176 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 177 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 178 179 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 180 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 181 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 182 #define CONFIG_SYS_DDR_RCW_1 0x00000000 183 #define CONFIG_SYS_DDR_RCW_2 0x00000000 184 #ifdef CONFIG_DDR_ECC_ENABLE 185 #define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */ 186 #else 187 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ 188 #endif 189 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 190 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 191 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 192 193 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 194 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 195 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 196 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF 197 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 198 #define CONFIG_SYS_DDR_MODE_1 0x40461520 199 #define CONFIG_SYS_DDR_MODE_2 0x8000c000 200 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000 201 202 #undef CONFIG_CLOCKS_IN_MHZ 203 204 /* 205 * Memory map 206 * 207 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable 208 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2) 209 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1 210 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable 211 * (early boot only) 212 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 213 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable 214 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 215 */ 216 217 /* 218 * Local Bus Definitions 219 */ 220 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 221 #define CONFIG_SYS_FLASH_BASE 0xec000000 222 223 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 224 225 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 226 | BR_PS_16 | BR_V) 227 228 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 229 230 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 231 #define CONFIG_SYS_FLASH_QUIET_TEST 232 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 233 234 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 235 236 #undef CONFIG_SYS_FLASH_CHECKSUM 237 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 238 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 239 240 #define CONFIG_FLASH_CFI_DRIVER 241 #define CONFIG_SYS_FLASH_CFI 242 #define CONFIG_SYS_FLASH_EMPTY_INFO 243 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 244 245 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 246 247 #define CONFIG_SYS_INIT_RAM_LOCK 248 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 249 /* Initial L1 address */ 250 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 251 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 252 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 253 /* Size of used area in RAM */ 254 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 255 256 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 257 GENERATED_GBL_DATA_SIZE) 258 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 259 260 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */ 261 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ 262 263 #define CONFIG_SYS_PMC_BASE 0xff980000 264 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE 265 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \ 266 BR_PS_8 | BR_V) 267 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 268 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ 269 OR_GPCM_EAD) 270 271 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 272 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 273 #ifdef CONFIG_NAND_FSL_ELBC 274 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ 275 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 276 #endif 277 278 /* Serial Port - controlled on board with jumper J8 279 * open - index 2 280 * shorted - index 1 281 */ 282 #define CONFIG_CONS_INDEX 1 283 #undef CONFIG_SERIAL_SOFTWARE_FIFO 284 #define CONFIG_SYS_NS16550_SERIAL 285 #define CONFIG_SYS_NS16550_REG_SIZE 1 286 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 287 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 288 #define CONFIG_NS16550_MIN_FUNCTIONS 289 #endif 290 291 #define CONFIG_SYS_BAUDRATE_TABLE \ 292 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 293 294 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 295 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 296 297 /* I2C */ 298 #define CONFIG_SYS_I2C 299 #define CONFIG_SYS_I2C_FSL 300 #define CONFIG_SYS_FSL_I2C_SPEED 400000 301 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 302 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 303 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 304 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 305 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 306 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 307 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */ 308 309 #define CONFIG_RTC_DS1337 310 #define CONFIG_RTC_DS1337_NOOSC 311 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 312 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 313 #define CONFIG_SYS_I2C_NCT72_ADDR 0x4C 314 #define CONFIG_SYS_I2C_IDT6V49205B 0x69 315 316 /* 317 * eSPI - Enhanced SPI 318 */ 319 #define CONFIG_HARD_SPI 320 321 #define CONFIG_SF_DEFAULT_SPEED 10000000 322 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 323 324 #if defined(CONFIG_PCI) 325 /* 326 * General PCI 327 * Memory space is mapped 1-1, but I/O space must start from 0. 328 */ 329 330 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 331 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9" 332 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 333 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 334 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 335 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 336 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 337 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 338 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 339 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 340 341 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 342 #define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10" 343 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 344 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 345 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 346 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 347 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 348 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 349 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 350 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 351 352 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 353 #endif /* CONFIG_PCI */ 354 355 /* 356 * Environment 357 */ 358 #ifdef CONFIG_ENV_FIT_UCBOOT 359 360 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000) 361 #define CONFIG_ENV_SIZE 0x20000 362 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 363 364 #else 365 366 #define CONFIG_ENV_SPI_BUS 0 367 #define CONFIG_ENV_SPI_CS 0 368 #define CONFIG_ENV_SPI_MAX_HZ 10000000 369 #define CONFIG_ENV_SPI_MODE 0 370 371 #ifdef CONFIG_RAMBOOT_SPIFLASH 372 373 #define CONFIG_ENV_SIZE 0x3000 /* 12KB */ 374 #define CONFIG_ENV_OFFSET 0x2000 /* 8KB */ 375 #define CONFIG_ENV_SECT_SIZE 0x1000 376 377 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT) 378 /* Address and size of Redundant Environment Sector */ 379 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 380 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 381 #endif 382 383 #elif defined(CONFIG_RAMBOOT_SDCARD) 384 #define CONFIG_FSL_FIXED_MMC_LOCATION 385 #define CONFIG_ENV_SIZE 0x2000 386 #define CONFIG_SYS_MMC_ENV_DEV 0 387 388 #elif defined(CONFIG_SYS_RAMBOOT) 389 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 390 #define CONFIG_ENV_SIZE 0x2000 391 392 #else 393 #define CONFIG_ENV_BASE (CONFIG_SYS_FLASH_BASE) 394 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 395 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 396 #define CONFIG_ENV_ADDR (CONFIG_ENV_BASE + 0xC0000) 397 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT) 398 /* Address and size of Redundant Environment Sector */ 399 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) 400 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 401 #endif 402 403 #endif 404 405 #endif /* CONFIG_ENV_FIT_UCBOOT */ 406 407 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 408 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 409 410 /* 411 * USB 412 */ 413 #define CONFIG_HAS_FSL_DR_USB 414 415 #if defined(CONFIG_HAS_FSL_DR_USB) 416 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 417 418 #ifdef CONFIG_USB_EHCI_HCD 419 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 420 #define CONFIG_USB_EHCI_FSL 421 #endif 422 #endif 423 424 #undef CONFIG_WATCHDOG /* watchdog disabled */ 425 426 #ifdef CONFIG_MMC 427 #define CONFIG_FSL_ESDHC 428 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 429 #define CONFIG_MMC_SPI 430 #endif 431 432 /* Misc Extra Settings */ 433 #undef CONFIG_WATCHDOG /* watchdog disabled */ 434 435 /* 436 * Miscellaneous configurable options 437 */ 438 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 439 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 440 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 441 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ 442 443 /* 444 * For booting Linux, the board info and command line data 445 * have to be in the first 64 MB of memory, since this is 446 * the maximum mapped by the Linux kernel during initialization. 447 */ 448 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ 449 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 450 451 #if defined(CONFIG_CMD_KGDB) 452 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 453 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 454 #endif 455 456 /* 457 * Environment Configuration 458 */ 459 460 #if defined(CONFIG_TSEC_ENET) 461 462 #if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3) 463 #else 464 #error "UCP1020 module revision is not defined !!!" 465 #endif 466 467 #define CONFIG_BOOTP_SERVERIP 468 469 #define CONFIG_MII /* MII PHY management */ 470 #define CONFIG_TSEC1_NAME "eTSEC1" 471 #define CONFIG_TSEC2_NAME "eTSEC2" 472 #define CONFIG_TSEC3_NAME "eTSEC3" 473 474 #define TSEC1_PHY_ADDR 4 475 #define TSEC2_PHY_ADDR 0 476 #define TSEC2_PHY_ADDR_SGMII 0x00 477 #define TSEC3_PHY_ADDR 6 478 479 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 480 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 481 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 482 483 #define TSEC1_PHYIDX 0 484 #define TSEC2_PHYIDX 0 485 #define TSEC3_PHYIDX 0 486 487 #endif 488 489 #define CONFIG_HOSTNAME UCP1020 490 #define CONFIG_ROOTPATH "/opt/nfsroot" 491 #define CONFIG_BOOTFILE "uImage" 492 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 493 494 /* default location for tftp and bootm */ 495 #define CONFIG_LOADADDR 1000000 496 497 #if defined(CONFIG_DONGLE) 498 499 #define CONFIG_EXTRA_ENV_SETTINGS \ 500 "bootcmd=run prog_spi_mbrbootcramfs\0" \ 501 "bootfile=uImage\0" \ 502 "consoledev=ttyS0\0" \ 503 "cramfsfile=image.cramfs\0" \ 504 "dtbaddr=0x00c00000\0" \ 505 "dtbfile=image.dtb\0" \ 506 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \ 507 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \ 508 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \ 509 "fileaddr=0x01000000\0" \ 510 "filesize=0x00080000\0" \ 511 "flashmbr=sf probe 0; " \ 512 "tftp $loadaddr $mbr; " \ 513 "sf erase $mbr_offset +$filesize; " \ 514 "sf write $loadaddr $mbr_offset $filesize\0" \ 515 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \ 516 "protect off $nor_recoveryaddr +$filesize; " \ 517 "erase $nor_recoveryaddr +$filesize; " \ 518 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \ 519 "protect on $nor_recoveryaddr +$filesize\0 " \ 520 "flashuboot=tftp $ubootaddr $ubootfile; " \ 521 "protect off $nor_ubootaddr +$filesize; " \ 522 "erase $nor_ubootaddr +$filesize; " \ 523 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \ 524 "protect on $nor_ubootaddr +$filesize\0 " \ 525 "flashworking=tftp $workingaddr $cramfsfile; " \ 526 "protect off $nor_workingaddr +$filesize; " \ 527 "erase $nor_workingaddr +$filesize; " \ 528 "cp.b $workingaddr $nor_workingaddr $filesize; " \ 529 "protect on $nor_workingaddr +$filesize\0 " \ 530 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \ 531 "kerneladdr=0x01100000\0" \ 532 "kernelfile=uImage\0" \ 533 "loadaddr=0x01000000\0" \ 534 "mbr=uCP1020d.mbr\0" \ 535 "mbr_offset=0x00000000\0" \ 536 "mmbr=uCP1020Quiet.mbr\0" \ 537 "mmcpart=0:2\0" \ 538 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \ 539 "mmc erase 1 1; " \ 540 "mmc write $loadaddr 1 1\0" \ 541 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \ 542 "mmc erase 0x40 0x400; " \ 543 "mmc write $loadaddr 0x40 0x400\0" \ 544 "netdev=eth0\0" \ 545 "nor_recoveryaddr=0xEC0A0000\0" \ 546 "nor_ubootaddr=0xEFF80000\0" \ 547 "nor_workingaddr=0xECFA0000\0" \ 548 "norbootrecovery=setenv bootargs $recoverybootargs" \ 549 " console=$consoledev,$baudrate $othbootargs; " \ 550 "run norloadrecovery; " \ 551 "bootm $kerneladdr - $dtbaddr\0" \ 552 "norbootworking=setenv bootargs $workingbootargs" \ 553 " console=$consoledev,$baudrate $othbootargs; " \ 554 "run norloadworking; " \ 555 "bootm $kerneladdr - $dtbaddr\0" \ 556 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \ 557 "setenv cramfsaddr $nor_recoveryaddr; " \ 558 "cramfsload $dtbaddr $dtbfile; " \ 559 "cramfsload $kerneladdr $kernelfile\0" \ 560 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \ 561 "setenv cramfsaddr $nor_workingaddr; " \ 562 "cramfsload $dtbaddr $dtbfile; " \ 563 "cramfsload $kerneladdr $kernelfile\0" \ 564 "prog_spi_mbr=run spi__mbr\0" \ 565 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \ 566 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \ 567 "run spi__cramfs\0" \ 568 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \ 569 " console=$consoledev,$baudrate $othbootargs; " \ 570 "tftp $rootfsaddr $rootfsfile; " \ 571 "tftp $loadaddr $kernelfile; " \ 572 "tftp $dtbaddr $dtbfile; " \ 573 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \ 574 "ramdisk_size=120000\0" \ 575 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 576 "recoveryaddr=0x02F00000\0" \ 577 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \ 578 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \ 579 "mw.l 0xffe0f008 0x00400000\0" \ 580 "rootfsaddr=0x02F00000\0" \ 581 "rootfsfile=rootfs.ext2.gz.uboot\0" \ 582 "rootpath=/opt/nfsroot\0" \ 583 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \ 584 "protect off 0xeC000000 +$filesize; " \ 585 "erase 0xEC000000 +$filesize; " \ 586 "cp.b $loadaddr 0xEC000000 $filesize; " \ 587 "cmp.b $loadaddr 0xEC000000 $filesize; " \ 588 "protect on 0xeC000000 +$filesize\0" \ 589 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \ 590 "protect off 0xeFF80000 +$filesize; " \ 591 "erase 0xEFF80000 +$filesize; " \ 592 "cp.b $loadaddr 0xEFF80000 $filesize; " \ 593 "cmp.b $loadaddr 0xEFF80000 $filesize; " \ 594 "protect on 0xeFF80000 +$filesize\0" \ 595 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \ 596 "sf probe 0; sf erase 0x8000 +$filesize; " \ 597 "sf write $loadaddr 0x8000 $filesize\0" \ 598 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \ 599 "protect off 0xec0a0000 +$filesize; " \ 600 "erase 0xeC0A0000 +$filesize; " \ 601 "cp.b $loadaddr 0xeC0A0000 $filesize; " \ 602 "protect on 0xec0a0000 +$filesize\0" \ 603 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \ 604 "sf probe 1; sf erase 0 +$filesize; " \ 605 "sf write $loadaddr 0 $filesize\0" \ 606 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \ 607 "sf probe 0; sf erase 0 +$filesize; " \ 608 "sf write $loadaddr 0 $filesize\0" \ 609 "tftpflash=tftpboot $loadaddr $uboot; " \ 610 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 611 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 612 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \ 613 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 614 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\ 615 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \ 616 "ubootaddr=0x01000000\0" \ 617 "ubootfile=u-boot.bin\0" \ 618 "ubootd=u-boot4dongle.bin\0" \ 619 "upgrade=run flashworking\0" \ 620 "usb_phy_type=ulpi\0 " \ 621 "workingaddr=0x02F00000\0" \ 622 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" 623 624 #else 625 626 #if defined(CONFIG_UCP1020T1) 627 628 #define CONFIG_EXTRA_ENV_SETTINGS \ 629 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \ 630 "bootfile=uImage\0" \ 631 "consoledev=ttyS0\0" \ 632 "cramfsfile=image.cramfs\0" \ 633 "dtbaddr=0x00c00000\0" \ 634 "dtbfile=image.dtb\0" \ 635 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \ 636 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \ 637 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \ 638 "fileaddr=0x01000000\0" \ 639 "filesize=0x00080000\0" \ 640 "flashmbr=sf probe 0; " \ 641 "tftp $loadaddr $mbr; " \ 642 "sf erase $mbr_offset +$filesize; " \ 643 "sf write $loadaddr $mbr_offset $filesize\0" \ 644 "flashrecovery=tftp $recoveryaddr $cramfsfile; " \ 645 "protect off $nor_recoveryaddr +$filesize; " \ 646 "erase $nor_recoveryaddr +$filesize; " \ 647 "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \ 648 "protect on $nor_recoveryaddr +$filesize\0 " \ 649 "flashuboot=tftp $ubootaddr $ubootfile; " \ 650 "protect off $nor_ubootaddr +$filesize; " \ 651 "erase $nor_ubootaddr +$filesize; " \ 652 "cp.b $ubootaddr $nor_ubootaddr $filesize; " \ 653 "protect on $nor_ubootaddr +$filesize\0 " \ 654 "flashworking=tftp $workingaddr $cramfsfile; " \ 655 "protect off $nor_workingaddr +$filesize; " \ 656 "erase $nor_workingaddr +$filesize; " \ 657 "cp.b $workingaddr $nor_workingaddr $filesize; " \ 658 "protect on $nor_workingaddr +$filesize\0 " \ 659 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \ 660 "kerneladdr=0x01100000\0" \ 661 "kernelfile=uImage\0" \ 662 "loadaddr=0x01000000\0" \ 663 "mbr=uCP1020.mbr\0" \ 664 "mbr_offset=0x00000000\0" \ 665 "netdev=eth0\0" \ 666 "nor_recoveryaddr=0xEC0A0000\0" \ 667 "nor_ubootaddr=0xEFF80000\0" \ 668 "nor_workingaddr=0xECFA0000\0" \ 669 "norbootrecovery=setenv bootargs $recoverybootargs" \ 670 " console=$consoledev,$baudrate $othbootargs; " \ 671 "run norloadrecovery; " \ 672 "bootm $kerneladdr - $dtbaddr\0" \ 673 "norbootworking=setenv bootargs $workingbootargs" \ 674 " console=$consoledev,$baudrate $othbootargs; " \ 675 "run norloadworking; " \ 676 "bootm $kerneladdr - $dtbaddr\0" \ 677 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \ 678 "setenv cramfsaddr $nor_recoveryaddr; " \ 679 "cramfsload $dtbaddr $dtbfile; " \ 680 "cramfsload $kerneladdr $kernelfile\0" \ 681 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \ 682 "setenv cramfsaddr $nor_workingaddr; " \ 683 "cramfsload $dtbaddr $dtbfile; " \ 684 "cramfsload $kerneladdr $kernelfile\0" \ 685 "othbootargs=quiet\0" \ 686 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \ 687 " console=$consoledev,$baudrate $othbootargs; " \ 688 "tftp $rootfsaddr $rootfsfile; " \ 689 "tftp $loadaddr $kernelfile; " \ 690 "tftp $dtbaddr $dtbfile; " \ 691 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \ 692 "ramdisk_size=120000\0" \ 693 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 694 "recoveryaddr=0x02F00000\0" \ 695 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \ 696 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \ 697 "mw.l 0xffe0f008 0x00400000\0" \ 698 "rootfsaddr=0x02F00000\0" \ 699 "rootfsfile=rootfs.ext2.gz.uboot\0" \ 700 "rootpath=/opt/nfsroot\0" \ 701 "silent=1\0" \ 702 "tftpflash=tftpboot $loadaddr $uboot; " \ 703 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 704 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 705 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \ 706 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 707 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\ 708 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \ 709 "ubootaddr=0x01000000\0" \ 710 "ubootfile=u-boot.bin\0" \ 711 "upgrade=run flashworking\0" \ 712 "workingaddr=0x02F00000\0" \ 713 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" 714 715 #else /* For Arcturus Modules */ 716 717 #define CONFIG_EXTRA_ENV_SETTINGS \ 718 "bootcmd=run norkernel\0" \ 719 "bootfile=uImage\0" \ 720 "consoledev=ttyS0\0" \ 721 "dtbaddr=0x00c00000\0" \ 722 "dtbfile=image.dtb\0" \ 723 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \ 724 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \ 725 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \ 726 "fileaddr=0x01000000\0" \ 727 "filesize=0x00080000\0" \ 728 "flashmbr=sf probe 0; " \ 729 "tftp $loadaddr $mbr; " \ 730 "sf erase $mbr_offset +$filesize; " \ 731 "sf write $loadaddr $mbr_offset $filesize\0" \ 732 "flashuboot=tftp $loadaddr $ubootfile; " \ 733 "protect off $nor_ubootaddr0 +$filesize; " \ 734 "erase $nor_ubootaddr0 +$filesize; " \ 735 "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \ 736 "protect on $nor_ubootaddr0 +$filesize; " \ 737 "protect off $nor_ubootaddr1 +$filesize; " \ 738 "erase $nor_ubootaddr1 +$filesize; " \ 739 "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \ 740 "protect on $nor_ubootaddr1 +$filesize\0 " \ 741 "format0=protect off $part0base +$part0size; " \ 742 "erase $part0base +$part0size\0" \ 743 "format1=protect off $part1base +$part1size; " \ 744 "erase $part1base +$part1size\0" \ 745 "format2=protect off $part2base +$part2size; " \ 746 "erase $part2base +$part2size\0" \ 747 "format3=protect off $part3base +$part3size; " \ 748 "erase $part3base +$part3size\0" \ 749 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \ 750 "kerneladdr=0x01100000\0" \ 751 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \ 752 "kernelfile=uImage\0" \ 753 "loadaddr=0x01000000\0" \ 754 "mbr=uCP1020.mbr\0" \ 755 "mbr_offset=0x00000000\0" \ 756 "netdev=eth0\0" \ 757 "nor_ubootaddr0=0xEC000000\0" \ 758 "nor_ubootaddr1=0xEFF80000\0" \ 759 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \ 760 "run norkernelload; " \ 761 "bootm $kerneladdr - $dtbaddr\0" \ 762 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \ 763 "setenv cramfsaddr $part0base; " \ 764 "cramfsload $dtbaddr $dtbfile; " \ 765 "cramfsload $kerneladdr $kernelfile\0" \ 766 "part0base=0xEC100000\0" \ 767 "part0size=0x00700000\0" \ 768 "part1base=0xEC800000\0" \ 769 "part1size=0x02000000\0" \ 770 "part2base=0xEE800000\0" \ 771 "part2size=0x00800000\0" \ 772 "part3base=0xEF000000\0" \ 773 "part3size=0x00F80000\0" \ 774 "partENVbase=0xEC080000\0" \ 775 "partENVsize=0x00080000\0" \ 776 "program0=tftp part0-000000.bin; " \ 777 "protect off $part0base +$filesize; " \ 778 "erase $part0base +$filesize; " \ 779 "cp.b $loadaddr $part0base $filesize; " \ 780 "echo Verifying...; " \ 781 "cmp.b $loadaddr $part0base $filesize\0" \ 782 "program1=tftp part1-000000.bin; " \ 783 "protect off $part1base +$filesize; " \ 784 "erase $part1base +$filesize; " \ 785 "cp.b $loadaddr $part1base $filesize; " \ 786 "echo Verifying...; " \ 787 "cmp.b $loadaddr $part1base $filesize\0" \ 788 "program2=tftp part2-000000.bin; " \ 789 "protect off $part2base +$filesize; " \ 790 "erase $part2base +$filesize; " \ 791 "cp.b $loadaddr $part2base $filesize; " \ 792 "echo Verifying...; " \ 793 "cmp.b $loadaddr $part2base $filesize\0" \ 794 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \ 795 " console=$consoledev,$baudrate $othbootargs; " \ 796 "tftp $rootfsaddr $rootfsfile; " \ 797 "tftp $loadaddr $kernelfile; " \ 798 "tftp $dtbaddr $dtbfile; " \ 799 "bootm $loadaddr $rootfsaddr $dtbaddr\0" \ 800 "ramdisk_size=120000\0" \ 801 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 802 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \ 803 "mw.l 0xffe0f008 0x00400000\0" \ 804 "rootfsaddr=0x02F00000\0" \ 805 "rootfsfile=rootfs.ext2.gz.uboot\0" \ 806 "rootpath=/opt/nfsroot\0" \ 807 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \ 808 "sf probe 0; sf erase 0 +$filesize; " \ 809 "sf write $loadaddr 0 $filesize\0" \ 810 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \ 811 "protect off 0xeC000000 +$filesize; " \ 812 "erase 0xEC000000 +$filesize; " \ 813 "cp.b $loadaddr 0xEC000000 $filesize; " \ 814 "cmp.b $loadaddr 0xEC000000 $filesize; " \ 815 "protect on 0xeC000000 +$filesize\0" \ 816 "tftpflash=tftpboot $loadaddr $uboot; " \ 817 "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 818 "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 819 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \ 820 "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \ 821 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\ 822 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \ 823 "ubootfile=u-boot.bin\0" \ 824 "upgrade=run flashuboot\0" \ 825 "usb_phy_type=ulpi\0 " \ 826 "boot_nfs= " \ 827 "setenv bootargs root=/dev/nfs rw " \ 828 "nfsroot=$serverip:$rootpath " \ 829 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 830 "console=$consoledev,$baudrate $othbootargs;" \ 831 "tftp $loadaddr $bootfile;" \ 832 "tftp $fdtaddr $fdtfile;" \ 833 "bootm $loadaddr - $fdtaddr\0" \ 834 "boot_hd = " \ 835 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 836 "console=$consoledev,$baudrate $othbootargs;" \ 837 "usb start;" \ 838 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 839 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 840 "bootm $loadaddr - $fdtaddr\0" \ 841 "boot_usb_fat = " \ 842 "setenv bootargs root=/dev/ram rw " \ 843 "console=$consoledev,$baudrate $othbootargs " \ 844 "ramdisk_size=$ramdisk_size;" \ 845 "usb start;" \ 846 "fatload usb 0:2 $loadaddr $bootfile;" \ 847 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 848 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 849 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \ 850 "boot_usb_ext2 = " \ 851 "setenv bootargs root=/dev/ram rw " \ 852 "console=$consoledev,$baudrate $othbootargs " \ 853 "ramdisk_size=$ramdisk_size;" \ 854 "usb start;" \ 855 "ext2load usb 0:4 $loadaddr $bootfile;" \ 856 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 857 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 858 "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \ 859 "boot_nor = " \ 860 "setenv bootargs root=/dev/$jffs2nor rw " \ 861 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ 862 "bootm $norbootaddr - $norfdtaddr\0 " \ 863 "boot_ram = " \ 864 "setenv bootargs root=/dev/ram rw " \ 865 "console=$consoledev,$baudrate $othbootargs " \ 866 "ramdisk_size=$ramdisk_size;" \ 867 "tftp $ramdiskaddr $ramdiskfile;" \ 868 "tftp $loadaddr $bootfile;" \ 869 "tftp $fdtaddr $fdtfile;" \ 870 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" 871 872 #endif 873 #endif 874 875 #endif /* __CONFIG_H */ 876