1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 RDB board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_T4240RDB 14 #define CONFIG_PHYS_64BIT 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_DISPLAY_BOARDINFO 17 18 #define CONFIG_FSL_SATA_V2 19 #define CONFIG_PCIE4 20 21 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 22 23 #ifdef CONFIG_RAMBOOT_PBL 24 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 25 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 26 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 27 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg 28 #endif 29 30 #define CONFIG_DDR_ECC 31 32 #define CONFIG_CMD_REGINFO 33 34 /* High Level Configuration Options */ 35 #define CONFIG_BOOKE 36 #define CONFIG_E500 /* BOOKE e500 family */ 37 #define CONFIG_E500MC /* BOOKE e500mc family */ 38 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 39 #define CONFIG_MP /* support multiple processors */ 40 41 #ifndef CONFIG_SYS_TEXT_BASE 42 #define CONFIG_SYS_TEXT_BASE 0xeff40000 43 #endif 44 45 #ifndef CONFIG_RESET_VECTOR_ADDRESS 46 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 47 #endif 48 49 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 50 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 51 #define CONFIG_FSL_IFC /* Enable IFC Support */ 52 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 53 #define CONFIG_PCI /* Enable PCI/PCIE */ 54 #define CONFIG_PCIE1 /* PCIE controler 1 */ 55 #define CONFIG_PCIE2 /* PCIE controler 2 */ 56 #define CONFIG_PCIE3 /* PCIE controler 3 */ 57 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 58 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 59 60 #define CONFIG_FSL_LAW /* Use common FSL init code */ 61 62 #define CONFIG_ENV_OVERWRITE 63 64 /* 65 * These can be toggled for performance analysis, otherwise use default. 66 */ 67 #define CONFIG_SYS_CACHE_STASHING 68 #define CONFIG_BTB /* toggle branch predition */ 69 #ifdef CONFIG_DDR_ECC 70 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 71 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 72 #endif 73 74 #define CONFIG_ENABLE_36BIT_PHYS 75 76 #define CONFIG_ADDR_MAP 77 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 78 79 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 80 #define CONFIG_SYS_MEMTEST_END 0x00400000 81 #define CONFIG_SYS_ALT_MEMTEST 82 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 83 84 /* 85 * Config the L3 Cache as L3 SRAM 86 */ 87 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 88 89 #define CONFIG_SYS_DCSRBAR 0xf0000000 90 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 91 92 /* 93 * DDR Setup 94 */ 95 #define CONFIG_VERY_BIG_RAM 96 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 97 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 98 99 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 100 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 101 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 102 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 103 104 #define CONFIG_DDR_SPD 105 #define CONFIG_SYS_FSL_DDR3 106 107 108 /* 109 * IFC Definitions 110 */ 111 #define CONFIG_SYS_FLASH_BASE 0xe0000000 112 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 113 114 115 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 116 117 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 118 #define CONFIG_MISC_INIT_R 119 120 #define CONFIG_HWCONFIG 121 122 /* define to use L1 as initial stack */ 123 #define CONFIG_L1_INIT_RAM 124 #define CONFIG_SYS_INIT_RAM_LOCK 125 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 126 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 127 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 128 /* The assembler doesn't like typecast */ 129 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 130 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 131 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 132 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 133 134 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 135 GENERATED_GBL_DATA_SIZE) 136 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 137 138 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 139 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 140 141 /* Serial Port - controlled on board with jumper J8 142 * open - index 2 143 * shorted - index 1 144 */ 145 #define CONFIG_CONS_INDEX 1 146 #define CONFIG_SYS_NS16550 147 #define CONFIG_SYS_NS16550_SERIAL 148 #define CONFIG_SYS_NS16550_REG_SIZE 1 149 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 150 151 #define CONFIG_SYS_BAUDRATE_TABLE \ 152 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 153 154 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 155 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 156 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 157 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 158 159 /* Use the HUSH parser */ 160 #define CONFIG_SYS_HUSH_PARSER 161 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 162 163 /* pass open firmware flat tree */ 164 #define CONFIG_OF_LIBFDT 165 #define CONFIG_OF_BOARD_SETUP 166 #define CONFIG_OF_STDOUT_VIA_ALIAS 167 168 /* new uImage format support */ 169 #define CONFIG_FIT 170 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 171 172 /* I2C */ 173 #define CONFIG_SYS_I2C 174 #define CONFIG_SYS_I2C_FSL 175 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 176 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 177 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 178 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 179 180 /* 181 * General PCI 182 * Memory space is mapped 1-1, but I/O space must start from 0. 183 */ 184 185 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 186 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 187 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 188 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 189 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 190 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 191 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 192 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 193 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 194 195 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 196 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 197 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 198 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 199 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 200 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 201 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 202 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 203 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 204 205 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 206 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 207 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 208 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 209 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 210 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 211 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 212 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 213 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 214 215 /* controller 4, Base address 203000 */ 216 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 217 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 218 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 219 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 220 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 221 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 222 223 #ifdef CONFIG_PCI 224 #define CONFIG_PCI_INDIRECT_BRIDGE 225 #define CONFIG_NET_MULTI 226 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 227 #define CONFIG_E1000 228 229 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 230 #define CONFIG_DOS_PARTITION 231 #endif /* CONFIG_PCI */ 232 233 /* SATA */ 234 #ifdef CONFIG_FSL_SATA_V2 235 #define CONFIG_LIBATA 236 #define CONFIG_FSL_SATA 237 238 #define CONFIG_SYS_SATA_MAX_DEVICE 2 239 #define CONFIG_SATA1 240 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 241 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 242 #define CONFIG_SATA2 243 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 244 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 245 246 #define CONFIG_LBA48 247 #define CONFIG_CMD_SATA 248 #define CONFIG_DOS_PARTITION 249 #define CONFIG_CMD_EXT2 250 #endif 251 252 #ifdef CONFIG_FMAN_ENET 253 #define CONFIG_MII /* MII PHY management */ 254 #define CONFIG_ETHPRIME "FM1@DTSEC1" 255 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 256 #endif 257 258 /* 259 * Environment 260 */ 261 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 262 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 263 264 /* 265 * Command line configuration. 266 */ 267 #include <config_cmd_default.h> 268 269 #define CONFIG_CMD_DHCP 270 #define CONFIG_CMD_ELF 271 #define CONFIG_CMD_ERRATA 272 #define CONFIG_CMD_GREPENV 273 #define CONFIG_CMD_IRQ 274 #define CONFIG_CMD_I2C 275 #define CONFIG_CMD_MII 276 #define CONFIG_CMD_PING 277 #define CONFIG_CMD_SETEXPR 278 279 #ifdef CONFIG_PCI 280 #define CONFIG_CMD_PCI 281 #define CONFIG_CMD_NET 282 #endif 283 284 /* 285 * Miscellaneous configurable options 286 */ 287 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 288 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 289 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 290 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 291 #ifdef CONFIG_CMD_KGDB 292 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 293 #else 294 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 295 #endif 296 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 297 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 298 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 299 300 /* 301 * For booting Linux, the board info and command line data 302 * have to be in the first 64 MB of memory, since this is 303 * the maximum mapped by the Linux kernel during initialization. 304 */ 305 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 306 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 307 308 #ifdef CONFIG_CMD_KGDB 309 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 310 #endif 311 312 /* 313 * Environment Configuration 314 */ 315 #define CONFIG_ROOTPATH "/opt/nfsroot" 316 #define CONFIG_BOOTFILE "uImage" 317 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 318 319 /* default location for tftp and bootm */ 320 #define CONFIG_LOADADDR 1000000 321 322 323 #define CONFIG_BAUDRATE 115200 324 325 #define CONFIG_HVBOOT \ 326 "setenv bootargs config-addr=0x60000000; " \ 327 "bootm 0x01000000 - 0x00f00000" 328 329 #ifdef CONFIG_SYS_NO_FLASH 330 #ifndef CONFIG_RAMBOOT_PBL 331 #define CONFIG_ENV_IS_NOWHERE 332 #endif 333 #else 334 #define CONFIG_FLASH_CFI_DRIVER 335 #define CONFIG_SYS_FLASH_CFI 336 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 337 #endif 338 339 #if defined(CONFIG_SPIFLASH) 340 #define CONFIG_SYS_EXTRA_ENV_RELOC 341 #define CONFIG_ENV_IS_IN_SPI_FLASH 342 #define CONFIG_ENV_SPI_BUS 0 343 #define CONFIG_ENV_SPI_CS 0 344 #define CONFIG_ENV_SPI_MAX_HZ 10000000 345 #define CONFIG_ENV_SPI_MODE 0 346 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 347 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 348 #define CONFIG_ENV_SECT_SIZE 0x10000 349 #elif defined(CONFIG_SDCARD) 350 #define CONFIG_SYS_EXTRA_ENV_RELOC 351 #define CONFIG_ENV_IS_IN_MMC 352 #define CONFIG_SYS_MMC_ENV_DEV 0 353 #define CONFIG_ENV_SIZE 0x2000 354 #define CONFIG_ENV_OFFSET (512 * 1658) 355 #elif defined(CONFIG_NAND) 356 #define CONFIG_SYS_EXTRA_ENV_RELOC 357 #define CONFIG_ENV_IS_IN_NAND 358 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 359 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 360 #elif defined(CONFIG_ENV_IS_NOWHERE) 361 #define CONFIG_ENV_SIZE 0x2000 362 #else 363 #define CONFIG_ENV_IS_IN_FLASH 364 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 365 #define CONFIG_ENV_SIZE 0x2000 366 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 367 #endif 368 369 #define CONFIG_SYS_CLK_FREQ 66666666 370 #define CONFIG_DDR_CLK_FREQ 133333333 371 372 #ifndef __ASSEMBLY__ 373 unsigned long get_board_sys_clk(void); 374 unsigned long get_board_ddr_clk(void); 375 #endif 376 377 /* 378 * DDR Setup 379 */ 380 #define CONFIG_SYS_SPD_BUS_NUM 0 381 #define SPD_EEPROM_ADDRESS1 0x52 382 #define SPD_EEPROM_ADDRESS2 0x54 383 #define SPD_EEPROM_ADDRESS3 0x56 384 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 385 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 386 387 /* 388 * IFC Definitions 389 */ 390 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 391 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 392 + 0x8000000) | \ 393 CSPR_PORT_SIZE_16 | \ 394 CSPR_MSEL_NOR | \ 395 CSPR_V) 396 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 397 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 398 CSPR_PORT_SIZE_16 | \ 399 CSPR_MSEL_NOR | \ 400 CSPR_V) 401 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 402 /* NOR Flash Timing Params */ 403 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 404 405 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 406 FTIM0_NOR_TEADC(0x5) | \ 407 FTIM0_NOR_TEAHC(0x5)) 408 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 409 FTIM1_NOR_TRAD_NOR(0x1A) |\ 410 FTIM1_NOR_TSEQRAD_NOR(0x13)) 411 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 412 FTIM2_NOR_TCH(0x4) | \ 413 FTIM2_NOR_TWPH(0x0E) | \ 414 FTIM2_NOR_TWP(0x1c)) 415 #define CONFIG_SYS_NOR_FTIM3 0x0 416 417 #define CONFIG_SYS_FLASH_QUIET_TEST 418 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 419 420 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 421 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 422 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 423 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 424 425 #define CONFIG_SYS_FLASH_EMPTY_INFO 426 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 427 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 428 429 /* NAND Flash on IFC */ 430 #define CONFIG_NAND_FSL_IFC 431 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 432 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 433 #define CONFIG_SYS_NAND_BASE 0xff800000 434 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 435 436 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 437 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 438 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 439 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 440 | CSPR_V) 441 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 442 443 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 444 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 445 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 446 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 447 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 448 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 449 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 450 451 #define CONFIG_SYS_NAND_ONFI_DETECTION 452 453 /* ONFI NAND Flash mode0 Timing Params */ 454 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 455 FTIM0_NAND_TWP(0x18) | \ 456 FTIM0_NAND_TWCHT(0x07) | \ 457 FTIM0_NAND_TWH(0x0a)) 458 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 459 FTIM1_NAND_TWBE(0x39) | \ 460 FTIM1_NAND_TRR(0x0e) | \ 461 FTIM1_NAND_TRP(0x18)) 462 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 463 FTIM2_NAND_TREH(0x0a) | \ 464 FTIM2_NAND_TWHRE(0x1e)) 465 #define CONFIG_SYS_NAND_FTIM3 0x0 466 467 #define CONFIG_SYS_NAND_DDR_LAW 11 468 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 469 #define CONFIG_SYS_MAX_NAND_DEVICE 1 470 #define CONFIG_CMD_NAND 471 472 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 473 474 #if defined(CONFIG_NAND) 475 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 476 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 477 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 478 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 479 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 480 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 481 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 482 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 483 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 484 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 485 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 486 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 487 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 488 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 489 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 490 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 491 #else 492 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 493 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 494 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 495 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 496 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 497 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 498 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 499 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 500 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 501 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 502 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 503 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 504 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 505 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 506 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 507 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 508 #endif 509 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 510 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 511 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 512 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 513 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 514 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 515 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 516 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 517 518 /* CPLD on IFC */ 519 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 520 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 521 #define CONFIG_SYS_CSPR3_EXT (0xf) 522 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 523 | CSPR_PORT_SIZE_8 \ 524 | CSPR_MSEL_GPCM \ 525 | CSPR_V) 526 527 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 528 #define CONFIG_SYS_CSOR3 0x0 529 530 /* CPLD Timing parameters for IFC CS3 */ 531 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 532 FTIM0_GPCM_TEADC(0x0e) | \ 533 FTIM0_GPCM_TEAHC(0x0e)) 534 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 535 FTIM1_GPCM_TRAD(0x1f)) 536 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 537 FTIM2_GPCM_TCH(0x8) | \ 538 FTIM2_GPCM_TWP(0x1f)) 539 #define CONFIG_SYS_CS3_FTIM3 0x0 540 541 #if defined(CONFIG_RAMBOOT_PBL) 542 #define CONFIG_SYS_RAMBOOT 543 #endif 544 545 546 /* I2C */ 547 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 548 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 549 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 550 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 551 552 #define I2C_MUX_CH_DEFAULT 0x8 553 #define I2C_MUX_CH_VOL_MONITOR 0xa 554 #define I2C_MUX_CH_VSC3316_FS 0xc 555 #define I2C_MUX_CH_VSC3316_BS 0xd 556 557 /* Voltage monitor on channel 2*/ 558 #define I2C_VOL_MONITOR_ADDR 0x40 559 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 560 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 561 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 562 563 /* 564 * eSPI - Enhanced SPI 565 */ 566 #define CONFIG_FSL_ESPI 567 #define CONFIG_SPI_FLASH 568 #define CONFIG_SPI_FLASH_SST 569 #define CONFIG_CMD_SF 570 #define CONFIG_SF_DEFAULT_SPEED 10000000 571 #define CONFIG_SF_DEFAULT_MODE 0 572 573 574 /* Qman/Bman */ 575 #ifndef CONFIG_NOBQFMAN 576 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 577 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 578 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 579 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 580 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 581 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 582 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 583 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 584 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 585 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 586 CONFIG_SYS_BMAN_CENA_SIZE) 587 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 588 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 589 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 590 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 591 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 592 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 593 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 594 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 595 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 596 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 597 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 598 CONFIG_SYS_QMAN_CENA_SIZE) 599 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 600 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 601 602 #define CONFIG_SYS_DPAA_FMAN 603 #define CONFIG_SYS_DPAA_PME 604 #define CONFIG_SYS_PMAN 605 #define CONFIG_SYS_DPAA_DCE 606 #define CONFIG_SYS_DPAA_RMAN 607 #define CONFIG_SYS_INTERLAKEN 608 609 /* Default address of microcode for the Linux Fman driver */ 610 #if defined(CONFIG_SPIFLASH) 611 /* 612 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 613 * env, so we got 0x110000. 614 */ 615 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 616 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 617 #elif defined(CONFIG_SDCARD) 618 /* 619 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 620 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 621 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 622 */ 623 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 624 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 625 #elif defined(CONFIG_NAND) 626 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 627 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 628 #else 629 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 630 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 631 #endif 632 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 633 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 634 #endif /* CONFIG_NOBQFMAN */ 635 636 #ifdef CONFIG_SYS_DPAA_FMAN 637 #define CONFIG_FMAN_ENET 638 #define CONFIG_PHYLIB_10G 639 #define CONFIG_PHY_VITESSE 640 #define CONFIG_PHY_CORTINA 641 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 642 #define CONFIG_CORTINA_FW_LENGTH 0x40000 643 #define CONFIG_PHY_TERANETICS 644 #define SGMII_PHY_ADDR1 0x0 645 #define SGMII_PHY_ADDR2 0x1 646 #define SGMII_PHY_ADDR3 0x2 647 #define SGMII_PHY_ADDR4 0x3 648 #define SGMII_PHY_ADDR5 0x4 649 #define SGMII_PHY_ADDR6 0x5 650 #define SGMII_PHY_ADDR7 0x6 651 #define SGMII_PHY_ADDR8 0x7 652 #define FM1_10GEC1_PHY_ADDR 0x10 653 #define FM1_10GEC2_PHY_ADDR 0x11 654 #define FM2_10GEC1_PHY_ADDR 0x12 655 #define FM2_10GEC2_PHY_ADDR 0x13 656 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 657 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 658 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 659 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 660 #endif 661 662 663 /* SATA */ 664 #ifdef CONFIG_FSL_SATA_V2 665 #define CONFIG_LIBATA 666 #define CONFIG_FSL_SATA 667 668 #define CONFIG_SYS_SATA_MAX_DEVICE 2 669 #define CONFIG_SATA1 670 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 671 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 672 #define CONFIG_SATA2 673 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 674 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 675 676 #define CONFIG_LBA48 677 #define CONFIG_CMD_SATA 678 #define CONFIG_DOS_PARTITION 679 #define CONFIG_CMD_EXT2 680 #endif 681 682 #ifdef CONFIG_FMAN_ENET 683 #define CONFIG_MII /* MII PHY management */ 684 #define CONFIG_ETHPRIME "FM1@DTSEC1" 685 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 686 #endif 687 688 /* 689 * USB 690 */ 691 #define CONFIG_CMD_USB 692 #define CONFIG_USB_STORAGE 693 #define CONFIG_USB_EHCI 694 #define CONFIG_USB_EHCI_FSL 695 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 696 #define CONFIG_CMD_EXT2 697 #define CONFIG_HAS_FSL_DR_USB 698 699 #define CONFIG_MMC 700 701 #ifdef CONFIG_MMC 702 #define CONFIG_FSL_ESDHC 703 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 704 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 705 #define CONFIG_CMD_MMC 706 #define CONFIG_GENERIC_MMC 707 #define CONFIG_CMD_EXT2 708 #define CONFIG_CMD_FAT 709 #define CONFIG_DOS_PARTITION 710 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 711 #endif 712 713 /* Hash command with SHA acceleration supported in hardware */ 714 #ifdef CONFIG_FSL_CAAM 715 #define CONFIG_CMD_HASH 716 #define CONFIG_SHA_HW_ACCEL 717 #endif 718 719 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 720 721 #define __USB_PHY_TYPE utmi 722 723 /* 724 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 725 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 726 * interleaving. It can be cacheline, page, bank, superbank. 727 * See doc/README.fsl-ddr for details. 728 */ 729 #ifdef CONFIG_PPC_T4240 730 #define CTRL_INTLV_PREFERED 3way_4KB 731 #else 732 #define CTRL_INTLV_PREFERED cacheline 733 #endif 734 735 #define CONFIG_EXTRA_ENV_SETTINGS \ 736 "hwconfig=fsl_ddr:" \ 737 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 738 "bank_intlv=auto;" \ 739 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 740 "netdev=eth0\0" \ 741 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 742 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 743 "tftpflash=tftpboot $loadaddr $uboot && " \ 744 "protect off $ubootaddr +$filesize && " \ 745 "erase $ubootaddr +$filesize && " \ 746 "cp.b $loadaddr $ubootaddr $filesize && " \ 747 "protect on $ubootaddr +$filesize && " \ 748 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 749 "consoledev=ttyS0\0" \ 750 "ramdiskaddr=2000000\0" \ 751 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 752 "fdtaddr=c00000\0" \ 753 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 754 "bdev=sda3\0" 755 756 #define CONFIG_HVBOOT \ 757 "setenv bootargs config-addr=0x60000000; " \ 758 "bootm 0x01000000 - 0x00f00000" 759 760 #define CONFIG_LINUX \ 761 "setenv bootargs root=/dev/ram rw " \ 762 "console=$consoledev,$baudrate $othbootargs;" \ 763 "setenv ramdiskaddr 0x02000000;" \ 764 "setenv fdtaddr 0x00c00000;" \ 765 "setenv loadaddr 0x1000000;" \ 766 "bootm $loadaddr $ramdiskaddr $fdtaddr" 767 768 #define CONFIG_HDBOOT \ 769 "setenv bootargs root=/dev/$bdev rw " \ 770 "console=$consoledev,$baudrate $othbootargs;" \ 771 "tftp $loadaddr $bootfile;" \ 772 "tftp $fdtaddr $fdtfile;" \ 773 "bootm $loadaddr - $fdtaddr" 774 775 #define CONFIG_NFSBOOTCOMMAND \ 776 "setenv bootargs root=/dev/nfs rw " \ 777 "nfsroot=$serverip:$rootpath " \ 778 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 779 "console=$consoledev,$baudrate $othbootargs;" \ 780 "tftp $loadaddr $bootfile;" \ 781 "tftp $fdtaddr $fdtfile;" \ 782 "bootm $loadaddr - $fdtaddr" 783 784 #define CONFIG_RAMBOOTCOMMAND \ 785 "setenv bootargs root=/dev/ram rw " \ 786 "console=$consoledev,$baudrate $othbootargs;" \ 787 "tftp $ramdiskaddr $ramdiskfile;" \ 788 "tftp $loadaddr $bootfile;" \ 789 "tftp $fdtaddr $fdtfile;" \ 790 "bootm $loadaddr $ramdiskaddr $fdtaddr" 791 792 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 793 794 #include <asm/fsl_secure_boot.h> 795 796 #ifdef CONFIG_SECURE_BOOT 797 /* Secure Boot target was not getting build for T4240 because of 798 * increased binary size. So the size is being reduced by removing USB 799 * which is anyways not used in Secure Environment. 800 */ 801 #undef CONFIG_CMD_USB 802 #define CONFIG_CMD_BLOB 803 #endif 804 805 #endif /* __CONFIG_H */ 806