1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2014 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * T4240 RDB board configuration file 8 */ 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #define CONFIG_FSL_SATA_V2 13 #define CONFIG_PCIE4 14 15 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 16 17 #ifdef CONFIG_RAMBOOT_PBL 18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 19 #ifndef CONFIG_SDCARD 20 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 21 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 22 #else 23 #define CONFIG_SPL_FLUSH_IMAGE 24 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 25 #define CONFIG_SPL_PAD_TO 0x40000 26 #define CONFIG_SPL_MAX_SIZE 0x28000 27 #define RESET_VECTOR_OFFSET 0x27FFC 28 #define BOOT_PAGE_OFFSET 0x27000 29 30 #ifdef CONFIG_SDCARD 31 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 32 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 33 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 34 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 35 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 36 #ifndef CONFIG_SPL_BUILD 37 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 38 #endif 39 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 40 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg 41 #define CONFIG_SPL_MMC_BOOT 42 #endif 43 44 #ifdef CONFIG_SPL_BUILD 45 #define CONFIG_SPL_SKIP_RELOCATE 46 #define CONFIG_SPL_COMMON_INIT_DDR 47 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 48 #endif 49 50 #endif 51 #endif /* CONFIG_RAMBOOT_PBL */ 52 53 #define CONFIG_DDR_ECC 54 55 /* High Level Configuration Options */ 56 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 57 58 #ifndef CONFIG_RESET_VECTOR_ADDRESS 59 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 60 #endif 61 62 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 63 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 64 #define CONFIG_PCIE1 /* PCIE controller 1 */ 65 #define CONFIG_PCIE2 /* PCIE controller 2 */ 66 #define CONFIG_PCIE3 /* PCIE controller 3 */ 67 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 68 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 69 70 #define CONFIG_ENV_OVERWRITE 71 72 /* 73 * These can be toggled for performance analysis, otherwise use default. 74 */ 75 #define CONFIG_SYS_CACHE_STASHING 76 #define CONFIG_BTB /* toggle branch predition */ 77 #ifdef CONFIG_DDR_ECC 78 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 79 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 80 #endif 81 82 #define CONFIG_ENABLE_36BIT_PHYS 83 84 #define CONFIG_ADDR_MAP 85 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 86 87 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 88 #define CONFIG_SYS_MEMTEST_END 0x00400000 89 90 /* 91 * Config the L3 Cache as L3 SRAM 92 */ 93 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 94 #define CONFIG_SYS_L3_SIZE (512 << 10) 95 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 96 #ifdef CONFIG_RAMBOOT_PBL 97 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 98 #endif 99 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 100 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 101 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 102 103 #define CONFIG_SYS_DCSRBAR 0xf0000000 104 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 105 106 /* 107 * DDR Setup 108 */ 109 #define CONFIG_VERY_BIG_RAM 110 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 111 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 112 113 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 114 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 115 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 116 117 #define CONFIG_DDR_SPD 118 119 /* 120 * IFC Definitions 121 */ 122 #define CONFIG_SYS_FLASH_BASE 0xe0000000 123 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 124 125 #ifdef CONFIG_SPL_BUILD 126 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 127 #else 128 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 129 #endif 130 131 #define CONFIG_HWCONFIG 132 133 /* define to use L1 as initial stack */ 134 #define CONFIG_L1_INIT_RAM 135 #define CONFIG_SYS_INIT_RAM_LOCK 136 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 137 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 138 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 139 /* The assembler doesn't like typecast */ 140 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 141 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 142 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 143 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 144 145 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 146 GENERATED_GBL_DATA_SIZE) 147 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 148 149 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 150 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 151 152 /* Serial Port - controlled on board with jumper J8 153 * open - index 2 154 * shorted - index 1 155 */ 156 #define CONFIG_SYS_NS16550_SERIAL 157 #define CONFIG_SYS_NS16550_REG_SIZE 1 158 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 159 160 #define CONFIG_SYS_BAUDRATE_TABLE \ 161 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 162 163 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 164 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 165 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 166 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 167 168 /* I2C */ 169 #define CONFIG_SYS_I2C 170 #define CONFIG_SYS_I2C_FSL 171 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 172 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 173 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 174 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 175 176 /* 177 * General PCI 178 * Memory space is mapped 1-1, but I/O space must start from 0. 179 */ 180 181 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 182 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 183 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 184 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 185 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 186 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 187 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 188 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 189 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 190 191 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 192 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 193 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 194 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 195 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 196 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 197 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 198 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 199 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 200 201 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 202 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 203 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 204 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 205 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 206 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 207 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 208 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 209 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 210 211 /* controller 4, Base address 203000 */ 212 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 213 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 214 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 215 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 216 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 217 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 218 219 #ifdef CONFIG_PCI 220 #define CONFIG_PCI_INDIRECT_BRIDGE 221 222 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 223 #endif /* CONFIG_PCI */ 224 225 /* SATA */ 226 #ifdef CONFIG_FSL_SATA_V2 227 #define CONFIG_SYS_SATA_MAX_DEVICE 2 228 #define CONFIG_SATA1 229 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 230 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 231 #define CONFIG_SATA2 232 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 233 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 234 235 #define CONFIG_LBA48 236 #endif 237 238 #ifdef CONFIG_FMAN_ENET 239 #define CONFIG_ETHPRIME "FM1@DTSEC1" 240 #endif 241 242 /* 243 * Environment 244 */ 245 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 246 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 247 248 /* 249 * Command line configuration. 250 */ 251 252 /* 253 * Miscellaneous configurable options 254 */ 255 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 256 257 /* 258 * For booting Linux, the board info and command line data 259 * have to be in the first 64 MB of memory, since this is 260 * the maximum mapped by the Linux kernel during initialization. 261 */ 262 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 263 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 264 265 #ifdef CONFIG_CMD_KGDB 266 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 267 #endif 268 269 /* 270 * Environment Configuration 271 */ 272 #define CONFIG_ROOTPATH "/opt/nfsroot" 273 #define CONFIG_BOOTFILE "uImage" 274 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 275 276 /* default location for tftp and bootm */ 277 #define CONFIG_LOADADDR 1000000 278 279 #define CONFIG_HVBOOT \ 280 "setenv bootargs config-addr=0x60000000; " \ 281 "bootm 0x01000000 - 0x00f00000" 282 283 #if defined(CONFIG_SPIFLASH) 284 #define CONFIG_ENV_SPI_BUS 0 285 #define CONFIG_ENV_SPI_CS 0 286 #define CONFIG_ENV_SPI_MAX_HZ 10000000 287 #define CONFIG_ENV_SPI_MODE 0 288 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 289 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 290 #define CONFIG_ENV_SECT_SIZE 0x10000 291 #elif defined(CONFIG_SDCARD) 292 #define CONFIG_SYS_MMC_ENV_DEV 0 293 #define CONFIG_ENV_SIZE 0x2000 294 #define CONFIG_ENV_OFFSET (512 * 0x800) 295 #elif defined(CONFIG_NAND) 296 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 297 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 298 #elif defined(CONFIG_ENV_IS_NOWHERE) 299 #define CONFIG_ENV_SIZE 0x2000 300 #else 301 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 302 #define CONFIG_ENV_SIZE 0x2000 303 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 304 #endif 305 306 #define CONFIG_SYS_CLK_FREQ 66666666 307 #define CONFIG_DDR_CLK_FREQ 133333333 308 309 #ifndef __ASSEMBLY__ 310 unsigned long get_board_sys_clk(void); 311 unsigned long get_board_ddr_clk(void); 312 #endif 313 314 /* 315 * DDR Setup 316 */ 317 #define CONFIG_SYS_SPD_BUS_NUM 0 318 #define SPD_EEPROM_ADDRESS1 0x52 319 #define SPD_EEPROM_ADDRESS2 0x54 320 #define SPD_EEPROM_ADDRESS3 0x56 321 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 322 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 323 324 /* 325 * IFC Definitions 326 */ 327 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 328 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 329 + 0x8000000) | \ 330 CSPR_PORT_SIZE_16 | \ 331 CSPR_MSEL_NOR | \ 332 CSPR_V) 333 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 334 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 335 CSPR_PORT_SIZE_16 | \ 336 CSPR_MSEL_NOR | \ 337 CSPR_V) 338 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 339 /* NOR Flash Timing Params */ 340 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 341 342 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 343 FTIM0_NOR_TEADC(0x5) | \ 344 FTIM0_NOR_TEAHC(0x5)) 345 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 346 FTIM1_NOR_TRAD_NOR(0x1A) |\ 347 FTIM1_NOR_TSEQRAD_NOR(0x13)) 348 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 349 FTIM2_NOR_TCH(0x4) | \ 350 FTIM2_NOR_TWPH(0x0E) | \ 351 FTIM2_NOR_TWP(0x1c)) 352 #define CONFIG_SYS_NOR_FTIM3 0x0 353 354 #define CONFIG_SYS_FLASH_QUIET_TEST 355 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 356 357 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 358 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 359 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 360 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 361 362 #define CONFIG_SYS_FLASH_EMPTY_INFO 363 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 364 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 365 366 /* NAND Flash on IFC */ 367 #define CONFIG_NAND_FSL_IFC 368 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 369 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 370 #define CONFIG_SYS_NAND_BASE 0xff800000 371 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 372 373 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 374 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 375 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 376 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 377 | CSPR_V) 378 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 379 380 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 381 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 382 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 383 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 384 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 385 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 386 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 387 388 #define CONFIG_SYS_NAND_ONFI_DETECTION 389 390 /* ONFI NAND Flash mode0 Timing Params */ 391 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 392 FTIM0_NAND_TWP(0x18) | \ 393 FTIM0_NAND_TWCHT(0x07) | \ 394 FTIM0_NAND_TWH(0x0a)) 395 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 396 FTIM1_NAND_TWBE(0x39) | \ 397 FTIM1_NAND_TRR(0x0e) | \ 398 FTIM1_NAND_TRP(0x18)) 399 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 400 FTIM2_NAND_TREH(0x0a) | \ 401 FTIM2_NAND_TWHRE(0x1e)) 402 #define CONFIG_SYS_NAND_FTIM3 0x0 403 404 #define CONFIG_SYS_NAND_DDR_LAW 11 405 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 406 #define CONFIG_SYS_MAX_NAND_DEVICE 1 407 408 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 409 410 #if defined(CONFIG_NAND) 411 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 412 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 413 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 414 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 415 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 416 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 417 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 418 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 419 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 420 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 421 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 422 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 423 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 424 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 425 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 426 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 427 #else 428 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 429 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 430 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 431 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 432 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 433 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 434 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 435 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 436 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 437 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 438 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 439 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 440 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 441 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 442 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 443 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 444 #endif 445 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 446 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 447 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 448 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 449 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 450 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 451 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 452 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 453 454 /* CPLD on IFC */ 455 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 456 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 457 #define CONFIG_SYS_CSPR3_EXT (0xf) 458 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 459 | CSPR_PORT_SIZE_8 \ 460 | CSPR_MSEL_GPCM \ 461 | CSPR_V) 462 463 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 464 #define CONFIG_SYS_CSOR3 0x0 465 466 /* CPLD Timing parameters for IFC CS3 */ 467 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 468 FTIM0_GPCM_TEADC(0x0e) | \ 469 FTIM0_GPCM_TEAHC(0x0e)) 470 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 471 FTIM1_GPCM_TRAD(0x1f)) 472 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 473 FTIM2_GPCM_TCH(0x8) | \ 474 FTIM2_GPCM_TWP(0x1f)) 475 #define CONFIG_SYS_CS3_FTIM3 0x0 476 477 #if defined(CONFIG_RAMBOOT_PBL) 478 #define CONFIG_SYS_RAMBOOT 479 #endif 480 481 /* I2C */ 482 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 483 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 484 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 485 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 486 487 #define I2C_MUX_CH_DEFAULT 0x8 488 #define I2C_MUX_CH_VOL_MONITOR 0xa 489 #define I2C_MUX_CH_VSC3316_FS 0xc 490 #define I2C_MUX_CH_VSC3316_BS 0xd 491 492 /* Voltage monitor on channel 2*/ 493 #define I2C_VOL_MONITOR_ADDR 0x40 494 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 495 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 496 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 497 498 #define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" 499 #ifndef CONFIG_SPL_BUILD 500 #define CONFIG_VID 501 #endif 502 #define CONFIG_VOL_MONITOR_IR36021_SET 503 #define CONFIG_VOL_MONITOR_IR36021_READ 504 /* The lowest and highest voltage allowed for T4240RDB */ 505 #define VDD_MV_MIN 819 506 #define VDD_MV_MAX 1212 507 508 /* 509 * eSPI - Enhanced SPI 510 */ 511 #define CONFIG_SF_DEFAULT_SPEED 10000000 512 #define CONFIG_SF_DEFAULT_MODE 0 513 514 /* Qman/Bman */ 515 #ifndef CONFIG_NOBQFMAN 516 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 517 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 518 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 519 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 520 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 521 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 522 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 523 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 524 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 525 CONFIG_SYS_BMAN_CENA_SIZE) 526 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 527 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 528 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 529 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 530 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 531 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 532 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 533 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 534 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 535 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 536 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 537 CONFIG_SYS_QMAN_CENA_SIZE) 538 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 539 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 540 541 #define CONFIG_SYS_DPAA_FMAN 542 #define CONFIG_SYS_DPAA_PME 543 #define CONFIG_SYS_PMAN 544 #define CONFIG_SYS_DPAA_DCE 545 #define CONFIG_SYS_DPAA_RMAN 546 #define CONFIG_SYS_INTERLAKEN 547 548 /* Default address of microcode for the Linux Fman driver */ 549 #if defined(CONFIG_SPIFLASH) 550 /* 551 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 552 * env, so we got 0x110000. 553 */ 554 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 555 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 556 #elif defined(CONFIG_SDCARD) 557 /* 558 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 559 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 560 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 561 */ 562 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 563 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 564 #elif defined(CONFIG_NAND) 565 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 566 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 567 #else 568 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 569 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 570 #endif 571 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 572 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 573 #endif /* CONFIG_NOBQFMAN */ 574 575 #ifdef CONFIG_SYS_DPAA_FMAN 576 #define CONFIG_FMAN_ENET 577 #define CONFIG_PHYLIB_10G 578 #define CONFIG_PHY_VITESSE 579 #define CONFIG_PHY_CORTINA 580 #define CONFIG_SYS_CORTINA_FW_IN_NOR 581 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 582 #define CONFIG_CORTINA_FW_LENGTH 0x40000 583 #define CONFIG_PHY_TERANETICS 584 #define SGMII_PHY_ADDR1 0x0 585 #define SGMII_PHY_ADDR2 0x1 586 #define SGMII_PHY_ADDR3 0x2 587 #define SGMII_PHY_ADDR4 0x3 588 #define SGMII_PHY_ADDR5 0x4 589 #define SGMII_PHY_ADDR6 0x5 590 #define SGMII_PHY_ADDR7 0x6 591 #define SGMII_PHY_ADDR8 0x7 592 #define FM1_10GEC1_PHY_ADDR 0x10 593 #define FM1_10GEC2_PHY_ADDR 0x11 594 #define FM2_10GEC1_PHY_ADDR 0x12 595 #define FM2_10GEC2_PHY_ADDR 0x13 596 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 597 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 598 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 599 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 600 #endif 601 602 /* SATA */ 603 #ifdef CONFIG_FSL_SATA_V2 604 #define CONFIG_SYS_SATA_MAX_DEVICE 2 605 #define CONFIG_SATA1 606 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 607 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 608 #define CONFIG_SATA2 609 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 610 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 611 612 #define CONFIG_LBA48 613 #endif 614 615 #ifdef CONFIG_FMAN_ENET 616 #define CONFIG_ETHPRIME "FM1@DTSEC1" 617 #endif 618 619 /* 620 * USB 621 */ 622 #define CONFIG_USB_EHCI_FSL 623 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 624 #define CONFIG_HAS_FSL_DR_USB 625 626 #ifdef CONFIG_MMC 627 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 628 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 629 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 630 #endif 631 632 633 #define __USB_PHY_TYPE utmi 634 635 /* 636 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 637 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 638 * interleaving. It can be cacheline, page, bank, superbank. 639 * See doc/README.fsl-ddr for details. 640 */ 641 #ifdef CONFIG_ARCH_T4240 642 #define CTRL_INTLV_PREFERED 3way_4KB 643 #else 644 #define CTRL_INTLV_PREFERED cacheline 645 #endif 646 647 #define CONFIG_EXTRA_ENV_SETTINGS \ 648 "hwconfig=fsl_ddr:" \ 649 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 650 "bank_intlv=auto;" \ 651 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 652 "netdev=eth0\0" \ 653 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 654 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 655 "tftpflash=tftpboot $loadaddr $uboot && " \ 656 "protect off $ubootaddr +$filesize && " \ 657 "erase $ubootaddr +$filesize && " \ 658 "cp.b $loadaddr $ubootaddr $filesize && " \ 659 "protect on $ubootaddr +$filesize && " \ 660 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 661 "consoledev=ttyS0\0" \ 662 "ramdiskaddr=2000000\0" \ 663 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 664 "fdtaddr=1e00000\0" \ 665 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 666 "bdev=sda3\0" 667 668 #define CONFIG_HVBOOT \ 669 "setenv bootargs config-addr=0x60000000; " \ 670 "bootm 0x01000000 - 0x00f00000" 671 672 #define CONFIG_LINUX \ 673 "setenv bootargs root=/dev/ram rw " \ 674 "console=$consoledev,$baudrate $othbootargs;" \ 675 "setenv ramdiskaddr 0x02000000;" \ 676 "setenv fdtaddr 0x00c00000;" \ 677 "setenv loadaddr 0x1000000;" \ 678 "bootm $loadaddr $ramdiskaddr $fdtaddr" 679 680 #define CONFIG_HDBOOT \ 681 "setenv bootargs root=/dev/$bdev rw " \ 682 "console=$consoledev,$baudrate $othbootargs;" \ 683 "tftp $loadaddr $bootfile;" \ 684 "tftp $fdtaddr $fdtfile;" \ 685 "bootm $loadaddr - $fdtaddr" 686 687 #define CONFIG_NFSBOOTCOMMAND \ 688 "setenv bootargs root=/dev/nfs rw " \ 689 "nfsroot=$serverip:$rootpath " \ 690 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 691 "console=$consoledev,$baudrate $othbootargs;" \ 692 "tftp $loadaddr $bootfile;" \ 693 "tftp $fdtaddr $fdtfile;" \ 694 "bootm $loadaddr - $fdtaddr" 695 696 #define CONFIG_RAMBOOTCOMMAND \ 697 "setenv bootargs root=/dev/ram rw " \ 698 "console=$consoledev,$baudrate $othbootargs;" \ 699 "tftp $ramdiskaddr $ramdiskfile;" \ 700 "tftp $loadaddr $bootfile;" \ 701 "tftp $fdtaddr $fdtfile;" \ 702 "bootm $loadaddr $ramdiskaddr $fdtaddr" 703 704 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 705 706 #include <asm/fsl_secure_boot.h> 707 708 #endif /* __CONFIG_H */ 709