1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 RDB board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_T4240RDB 14 #define CONFIG_PHYS_64BIT 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_DISPLAY_BOARDINFO 17 18 #define CONFIG_FSL_SATA_V2 19 #define CONFIG_PCIE4 20 21 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 22 23 #ifdef CONFIG_RAMBOOT_PBL 24 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg 26 #ifndef CONFIG_SDCARD 27 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 28 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 29 #else 30 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 31 #define CONFIG_SPL_ENV_SUPPORT 32 #define CONFIG_SPL_SERIAL_SUPPORT 33 #define CONFIG_SPL_FLUSH_IMAGE 34 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 35 #define CONFIG_SPL_LIBGENERIC_SUPPORT 36 #define CONFIG_SPL_LIBCOMMON_SUPPORT 37 #define CONFIG_SPL_I2C_SUPPORT 38 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 39 #define CONFIG_FSL_LAW /* Use common FSL init code */ 40 #define CONFIG_SYS_TEXT_BASE 0x00201000 41 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 42 #define CONFIG_SPL_PAD_TO 0x40000 43 #define CONFIG_SPL_MAX_SIZE 0x28000 44 #define RESET_VECTOR_OFFSET 0x27FFC 45 #define BOOT_PAGE_OFFSET 0x27000 46 47 #ifdef CONFIG_SDCARD 48 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 49 #define CONFIG_SPL_MMC_SUPPORT 50 #define CONFIG_SPL_MMC_MINIMAL 51 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 52 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 53 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 54 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 55 #ifndef CONFIG_SPL_BUILD 56 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 57 #endif 58 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 59 #define CONFIG_SPL_MMC_BOOT 60 #endif 61 62 #ifdef CONFIG_SPL_BUILD 63 #define CONFIG_SPL_SKIP_RELOCATE 64 #define CONFIG_SPL_COMMON_INIT_DDR 65 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 66 #define CONFIG_SYS_NO_FLASH 67 #endif 68 69 #endif 70 #endif /* CONFIG_RAMBOOT_PBL */ 71 72 #define CONFIG_DDR_ECC 73 74 #define CONFIG_CMD_REGINFO 75 76 /* High Level Configuration Options */ 77 #define CONFIG_BOOKE 78 #define CONFIG_E500 /* BOOKE e500 family */ 79 #define CONFIG_E500MC /* BOOKE e500mc family */ 80 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 81 #define CONFIG_MP /* support multiple processors */ 82 83 #ifndef CONFIG_SYS_TEXT_BASE 84 #define CONFIG_SYS_TEXT_BASE 0xeff40000 85 #endif 86 87 #ifndef CONFIG_RESET_VECTOR_ADDRESS 88 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 89 #endif 90 91 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 92 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 93 #define CONFIG_FSL_IFC /* Enable IFC Support */ 94 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 95 #define CONFIG_PCI /* Enable PCI/PCIE */ 96 #define CONFIG_PCIE1 /* PCIE controler 1 */ 97 #define CONFIG_PCIE2 /* PCIE controler 2 */ 98 #define CONFIG_PCIE3 /* PCIE controler 3 */ 99 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 100 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 101 102 #define CONFIG_FSL_LAW /* Use common FSL init code */ 103 104 #define CONFIG_ENV_OVERWRITE 105 106 /* 107 * These can be toggled for performance analysis, otherwise use default. 108 */ 109 #define CONFIG_SYS_CACHE_STASHING 110 #define CONFIG_BTB /* toggle branch predition */ 111 #ifdef CONFIG_DDR_ECC 112 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 113 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 114 #endif 115 116 #define CONFIG_ENABLE_36BIT_PHYS 117 118 #define CONFIG_ADDR_MAP 119 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 120 121 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 122 #define CONFIG_SYS_MEMTEST_END 0x00400000 123 #define CONFIG_SYS_ALT_MEMTEST 124 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 125 126 /* 127 * Config the L3 Cache as L3 SRAM 128 */ 129 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 130 #define CONFIG_SYS_L3_SIZE (512 << 10) 131 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 132 #ifdef CONFIG_RAMBOOT_PBL 133 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 134 #endif 135 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 136 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 137 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 138 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 139 140 #define CONFIG_SYS_DCSRBAR 0xf0000000 141 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 142 143 /* 144 * DDR Setup 145 */ 146 #define CONFIG_VERY_BIG_RAM 147 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 148 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 149 150 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 151 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 152 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 153 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 154 155 #define CONFIG_DDR_SPD 156 #define CONFIG_SYS_FSL_DDR3 157 158 159 /* 160 * IFC Definitions 161 */ 162 #define CONFIG_SYS_FLASH_BASE 0xe0000000 163 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 164 165 166 #ifdef CONFIG_SPL_BUILD 167 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 168 #else 169 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 170 #endif 171 172 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 173 #define CONFIG_MISC_INIT_R 174 175 #define CONFIG_HWCONFIG 176 177 /* define to use L1 as initial stack */ 178 #define CONFIG_L1_INIT_RAM 179 #define CONFIG_SYS_INIT_RAM_LOCK 180 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 182 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 183 /* The assembler doesn't like typecast */ 184 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 185 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 186 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 187 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 188 189 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 190 GENERATED_GBL_DATA_SIZE) 191 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 192 193 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 194 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 195 196 /* Serial Port - controlled on board with jumper J8 197 * open - index 2 198 * shorted - index 1 199 */ 200 #define CONFIG_CONS_INDEX 1 201 #define CONFIG_SYS_NS16550 202 #define CONFIG_SYS_NS16550_SERIAL 203 #define CONFIG_SYS_NS16550_REG_SIZE 1 204 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 205 206 #define CONFIG_SYS_BAUDRATE_TABLE \ 207 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 208 209 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 210 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 211 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 212 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 213 214 /* Use the HUSH parser */ 215 #define CONFIG_SYS_HUSH_PARSER 216 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 217 218 /* pass open firmware flat tree */ 219 #define CONFIG_OF_LIBFDT 220 #define CONFIG_OF_BOARD_SETUP 221 #define CONFIG_OF_STDOUT_VIA_ALIAS 222 223 /* new uImage format support */ 224 #define CONFIG_FIT 225 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 226 227 /* I2C */ 228 #define CONFIG_SYS_I2C 229 #define CONFIG_SYS_I2C_FSL 230 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 231 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 232 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 233 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 234 235 /* 236 * General PCI 237 * Memory space is mapped 1-1, but I/O space must start from 0. 238 */ 239 240 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 241 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 242 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 243 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 244 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 245 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 246 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 247 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 248 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 249 250 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 251 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 252 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 253 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 254 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 255 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 256 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 257 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 258 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 259 260 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 261 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 262 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 263 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 264 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 265 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 266 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 267 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 268 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 269 270 /* controller 4, Base address 203000 */ 271 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 272 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 273 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 274 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 275 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 276 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 277 278 #ifdef CONFIG_PCI 279 #define CONFIG_PCI_INDIRECT_BRIDGE 280 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 281 282 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 283 #define CONFIG_DOS_PARTITION 284 #endif /* CONFIG_PCI */ 285 286 /* SATA */ 287 #ifdef CONFIG_FSL_SATA_V2 288 #define CONFIG_LIBATA 289 #define CONFIG_FSL_SATA 290 291 #define CONFIG_SYS_SATA_MAX_DEVICE 2 292 #define CONFIG_SATA1 293 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 294 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 295 #define CONFIG_SATA2 296 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 297 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 298 299 #define CONFIG_LBA48 300 #define CONFIG_CMD_SATA 301 #define CONFIG_DOS_PARTITION 302 #define CONFIG_CMD_EXT2 303 #endif 304 305 #ifdef CONFIG_FMAN_ENET 306 #define CONFIG_MII /* MII PHY management */ 307 #define CONFIG_ETHPRIME "FM1@DTSEC1" 308 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 309 #endif 310 311 /* 312 * Environment 313 */ 314 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 315 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 316 317 /* 318 * Command line configuration. 319 */ 320 #define CONFIG_CMD_DHCP 321 #define CONFIG_CMD_ELF 322 #define CONFIG_CMD_ERRATA 323 #define CONFIG_CMD_GREPENV 324 #define CONFIG_CMD_IRQ 325 #define CONFIG_CMD_I2C 326 #define CONFIG_CMD_MII 327 #define CONFIG_CMD_PING 328 329 #ifdef CONFIG_PCI 330 #define CONFIG_CMD_PCI 331 #endif 332 333 /* 334 * Miscellaneous configurable options 335 */ 336 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 337 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 338 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 339 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 340 #ifdef CONFIG_CMD_KGDB 341 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 342 #else 343 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 344 #endif 345 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 346 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 347 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 348 349 /* 350 * For booting Linux, the board info and command line data 351 * have to be in the first 64 MB of memory, since this is 352 * the maximum mapped by the Linux kernel during initialization. 353 */ 354 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 355 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 356 357 #ifdef CONFIG_CMD_KGDB 358 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 359 #endif 360 361 /* 362 * Environment Configuration 363 */ 364 #define CONFIG_ROOTPATH "/opt/nfsroot" 365 #define CONFIG_BOOTFILE "uImage" 366 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 367 368 /* default location for tftp and bootm */ 369 #define CONFIG_LOADADDR 1000000 370 371 372 #define CONFIG_BAUDRATE 115200 373 374 #define CONFIG_HVBOOT \ 375 "setenv bootargs config-addr=0x60000000; " \ 376 "bootm 0x01000000 - 0x00f00000" 377 378 #ifdef CONFIG_SYS_NO_FLASH 379 #ifndef CONFIG_RAMBOOT_PBL 380 #define CONFIG_ENV_IS_NOWHERE 381 #endif 382 #else 383 #define CONFIG_FLASH_CFI_DRIVER 384 #define CONFIG_SYS_FLASH_CFI 385 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 386 #endif 387 388 #if defined(CONFIG_SPIFLASH) 389 #define CONFIG_SYS_EXTRA_ENV_RELOC 390 #define CONFIG_ENV_IS_IN_SPI_FLASH 391 #define CONFIG_ENV_SPI_BUS 0 392 #define CONFIG_ENV_SPI_CS 0 393 #define CONFIG_ENV_SPI_MAX_HZ 10000000 394 #define CONFIG_ENV_SPI_MODE 0 395 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 396 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 397 #define CONFIG_ENV_SECT_SIZE 0x10000 398 #elif defined(CONFIG_SDCARD) 399 #define CONFIG_SYS_EXTRA_ENV_RELOC 400 #define CONFIG_ENV_IS_IN_MMC 401 #define CONFIG_SYS_MMC_ENV_DEV 0 402 #define CONFIG_ENV_SIZE 0x2000 403 #define CONFIG_ENV_OFFSET (512 * 0x800) 404 #elif defined(CONFIG_NAND) 405 #define CONFIG_SYS_EXTRA_ENV_RELOC 406 #define CONFIG_ENV_IS_IN_NAND 407 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 408 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 409 #elif defined(CONFIG_ENV_IS_NOWHERE) 410 #define CONFIG_ENV_SIZE 0x2000 411 #else 412 #define CONFIG_ENV_IS_IN_FLASH 413 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 414 #define CONFIG_ENV_SIZE 0x2000 415 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 416 #endif 417 418 #define CONFIG_SYS_CLK_FREQ 66666666 419 #define CONFIG_DDR_CLK_FREQ 133333333 420 421 #ifndef __ASSEMBLY__ 422 unsigned long get_board_sys_clk(void); 423 unsigned long get_board_ddr_clk(void); 424 #endif 425 426 /* 427 * DDR Setup 428 */ 429 #define CONFIG_SYS_SPD_BUS_NUM 0 430 #define SPD_EEPROM_ADDRESS1 0x52 431 #define SPD_EEPROM_ADDRESS2 0x54 432 #define SPD_EEPROM_ADDRESS3 0x56 433 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 434 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 435 436 /* 437 * IFC Definitions 438 */ 439 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 440 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 441 + 0x8000000) | \ 442 CSPR_PORT_SIZE_16 | \ 443 CSPR_MSEL_NOR | \ 444 CSPR_V) 445 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 446 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 447 CSPR_PORT_SIZE_16 | \ 448 CSPR_MSEL_NOR | \ 449 CSPR_V) 450 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 451 /* NOR Flash Timing Params */ 452 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 453 454 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 455 FTIM0_NOR_TEADC(0x5) | \ 456 FTIM0_NOR_TEAHC(0x5)) 457 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 458 FTIM1_NOR_TRAD_NOR(0x1A) |\ 459 FTIM1_NOR_TSEQRAD_NOR(0x13)) 460 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 461 FTIM2_NOR_TCH(0x4) | \ 462 FTIM2_NOR_TWPH(0x0E) | \ 463 FTIM2_NOR_TWP(0x1c)) 464 #define CONFIG_SYS_NOR_FTIM3 0x0 465 466 #define CONFIG_SYS_FLASH_QUIET_TEST 467 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 468 469 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 470 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 471 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 472 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 473 474 #define CONFIG_SYS_FLASH_EMPTY_INFO 475 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 476 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 477 478 /* NAND Flash on IFC */ 479 #define CONFIG_NAND_FSL_IFC 480 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 481 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 482 #define CONFIG_SYS_NAND_BASE 0xff800000 483 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 484 485 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 486 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 487 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 488 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 489 | CSPR_V) 490 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 491 492 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 493 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 494 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 495 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 496 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 497 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 498 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 499 500 #define CONFIG_SYS_NAND_ONFI_DETECTION 501 502 /* ONFI NAND Flash mode0 Timing Params */ 503 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 504 FTIM0_NAND_TWP(0x18) | \ 505 FTIM0_NAND_TWCHT(0x07) | \ 506 FTIM0_NAND_TWH(0x0a)) 507 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 508 FTIM1_NAND_TWBE(0x39) | \ 509 FTIM1_NAND_TRR(0x0e) | \ 510 FTIM1_NAND_TRP(0x18)) 511 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 512 FTIM2_NAND_TREH(0x0a) | \ 513 FTIM2_NAND_TWHRE(0x1e)) 514 #define CONFIG_SYS_NAND_FTIM3 0x0 515 516 #define CONFIG_SYS_NAND_DDR_LAW 11 517 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 518 #define CONFIG_SYS_MAX_NAND_DEVICE 1 519 #define CONFIG_CMD_NAND 520 521 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 522 523 #if defined(CONFIG_NAND) 524 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 525 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 526 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 527 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 528 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 529 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 530 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 531 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 532 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 533 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 534 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 535 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 536 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 537 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 538 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 539 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 540 #else 541 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 542 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 543 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 544 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 545 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 546 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 547 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 548 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 549 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 550 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 551 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 552 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 553 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 554 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 555 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 556 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 557 #endif 558 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 559 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 560 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 561 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 562 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 563 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 564 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 565 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 566 567 /* CPLD on IFC */ 568 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 569 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 570 #define CONFIG_SYS_CSPR3_EXT (0xf) 571 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 572 | CSPR_PORT_SIZE_8 \ 573 | CSPR_MSEL_GPCM \ 574 | CSPR_V) 575 576 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 577 #define CONFIG_SYS_CSOR3 0x0 578 579 /* CPLD Timing parameters for IFC CS3 */ 580 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 581 FTIM0_GPCM_TEADC(0x0e) | \ 582 FTIM0_GPCM_TEAHC(0x0e)) 583 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 584 FTIM1_GPCM_TRAD(0x1f)) 585 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 586 FTIM2_GPCM_TCH(0x8) | \ 587 FTIM2_GPCM_TWP(0x1f)) 588 #define CONFIG_SYS_CS3_FTIM3 0x0 589 590 #if defined(CONFIG_RAMBOOT_PBL) 591 #define CONFIG_SYS_RAMBOOT 592 #endif 593 594 595 /* I2C */ 596 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 597 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 598 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 599 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 600 601 #define I2C_MUX_CH_DEFAULT 0x8 602 #define I2C_MUX_CH_VOL_MONITOR 0xa 603 #define I2C_MUX_CH_VSC3316_FS 0xc 604 #define I2C_MUX_CH_VSC3316_BS 0xd 605 606 /* Voltage monitor on channel 2*/ 607 #define I2C_VOL_MONITOR_ADDR 0x40 608 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 609 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 610 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 611 612 /* 613 * eSPI - Enhanced SPI 614 */ 615 #define CONFIG_FSL_ESPI 616 #define CONFIG_SPI_FLASH_SST 617 #define CONFIG_CMD_SF 618 #define CONFIG_SF_DEFAULT_SPEED 10000000 619 #define CONFIG_SF_DEFAULT_MODE 0 620 621 622 /* Qman/Bman */ 623 #ifndef CONFIG_NOBQFMAN 624 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 625 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 626 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 627 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 628 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 629 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 630 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 631 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 632 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 633 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 634 CONFIG_SYS_BMAN_CENA_SIZE) 635 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 636 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 637 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 638 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 639 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 640 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 641 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 642 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 643 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 644 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 645 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 646 CONFIG_SYS_QMAN_CENA_SIZE) 647 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 648 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 649 650 #define CONFIG_SYS_DPAA_FMAN 651 #define CONFIG_SYS_DPAA_PME 652 #define CONFIG_SYS_PMAN 653 #define CONFIG_SYS_DPAA_DCE 654 #define CONFIG_SYS_DPAA_RMAN 655 #define CONFIG_SYS_INTERLAKEN 656 657 /* Default address of microcode for the Linux Fman driver */ 658 #if defined(CONFIG_SPIFLASH) 659 /* 660 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 661 * env, so we got 0x110000. 662 */ 663 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 664 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 665 #elif defined(CONFIG_SDCARD) 666 /* 667 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 668 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 669 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 670 */ 671 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 672 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 673 #elif defined(CONFIG_NAND) 674 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 675 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 676 #else 677 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 678 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 679 #endif 680 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 681 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 682 #endif /* CONFIG_NOBQFMAN */ 683 684 #ifdef CONFIG_SYS_DPAA_FMAN 685 #define CONFIG_FMAN_ENET 686 #define CONFIG_PHYLIB_10G 687 #define CONFIG_PHY_VITESSE 688 #define CONFIG_PHY_CORTINA 689 #define CONFIG_SYS_CORTINA_FW_IN_NOR 690 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 691 #define CONFIG_CORTINA_FW_LENGTH 0x40000 692 #define CONFIG_PHY_TERANETICS 693 #define SGMII_PHY_ADDR1 0x0 694 #define SGMII_PHY_ADDR2 0x1 695 #define SGMII_PHY_ADDR3 0x2 696 #define SGMII_PHY_ADDR4 0x3 697 #define SGMII_PHY_ADDR5 0x4 698 #define SGMII_PHY_ADDR6 0x5 699 #define SGMII_PHY_ADDR7 0x6 700 #define SGMII_PHY_ADDR8 0x7 701 #define FM1_10GEC1_PHY_ADDR 0x10 702 #define FM1_10GEC2_PHY_ADDR 0x11 703 #define FM2_10GEC1_PHY_ADDR 0x12 704 #define FM2_10GEC2_PHY_ADDR 0x13 705 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 706 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 707 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 708 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 709 #endif 710 711 712 /* SATA */ 713 #ifdef CONFIG_FSL_SATA_V2 714 #define CONFIG_LIBATA 715 #define CONFIG_FSL_SATA 716 717 #define CONFIG_SYS_SATA_MAX_DEVICE 2 718 #define CONFIG_SATA1 719 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 720 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 721 #define CONFIG_SATA2 722 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 723 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 724 725 #define CONFIG_LBA48 726 #define CONFIG_CMD_SATA 727 #define CONFIG_DOS_PARTITION 728 #define CONFIG_CMD_EXT2 729 #endif 730 731 #ifdef CONFIG_FMAN_ENET 732 #define CONFIG_MII /* MII PHY management */ 733 #define CONFIG_ETHPRIME "FM1@DTSEC1" 734 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 735 #endif 736 737 /* 738 * USB 739 */ 740 #define CONFIG_CMD_USB 741 #define CONFIG_USB_STORAGE 742 #define CONFIG_USB_EHCI 743 #define CONFIG_USB_EHCI_FSL 744 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 745 #define CONFIG_CMD_EXT2 746 #define CONFIG_HAS_FSL_DR_USB 747 748 #define CONFIG_MMC 749 750 #ifdef CONFIG_MMC 751 #define CONFIG_FSL_ESDHC 752 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 753 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 754 #define CONFIG_CMD_MMC 755 #define CONFIG_GENERIC_MMC 756 #define CONFIG_CMD_EXT2 757 #define CONFIG_CMD_FAT 758 #define CONFIG_DOS_PARTITION 759 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 760 #endif 761 762 /* Hash command with SHA acceleration supported in hardware */ 763 #ifdef CONFIG_FSL_CAAM 764 #define CONFIG_CMD_HASH 765 #define CONFIG_SHA_HW_ACCEL 766 #endif 767 768 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 769 770 #define __USB_PHY_TYPE utmi 771 772 /* 773 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 774 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 775 * interleaving. It can be cacheline, page, bank, superbank. 776 * See doc/README.fsl-ddr for details. 777 */ 778 #ifdef CONFIG_PPC_T4240 779 #define CTRL_INTLV_PREFERED 3way_4KB 780 #else 781 #define CTRL_INTLV_PREFERED cacheline 782 #endif 783 784 #define CONFIG_EXTRA_ENV_SETTINGS \ 785 "hwconfig=fsl_ddr:" \ 786 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 787 "bank_intlv=auto;" \ 788 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 789 "netdev=eth0\0" \ 790 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 791 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 792 "tftpflash=tftpboot $loadaddr $uboot && " \ 793 "protect off $ubootaddr +$filesize && " \ 794 "erase $ubootaddr +$filesize && " \ 795 "cp.b $loadaddr $ubootaddr $filesize && " \ 796 "protect on $ubootaddr +$filesize && " \ 797 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 798 "consoledev=ttyS0\0" \ 799 "ramdiskaddr=2000000\0" \ 800 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 801 "fdtaddr=c00000\0" \ 802 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 803 "bdev=sda3\0" 804 805 #define CONFIG_HVBOOT \ 806 "setenv bootargs config-addr=0x60000000; " \ 807 "bootm 0x01000000 - 0x00f00000" 808 809 #define CONFIG_LINUX \ 810 "setenv bootargs root=/dev/ram rw " \ 811 "console=$consoledev,$baudrate $othbootargs;" \ 812 "setenv ramdiskaddr 0x02000000;" \ 813 "setenv fdtaddr 0x00c00000;" \ 814 "setenv loadaddr 0x1000000;" \ 815 "bootm $loadaddr $ramdiskaddr $fdtaddr" 816 817 #define CONFIG_HDBOOT \ 818 "setenv bootargs root=/dev/$bdev rw " \ 819 "console=$consoledev,$baudrate $othbootargs;" \ 820 "tftp $loadaddr $bootfile;" \ 821 "tftp $fdtaddr $fdtfile;" \ 822 "bootm $loadaddr - $fdtaddr" 823 824 #define CONFIG_NFSBOOTCOMMAND \ 825 "setenv bootargs root=/dev/nfs rw " \ 826 "nfsroot=$serverip:$rootpath " \ 827 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 828 "console=$consoledev,$baudrate $othbootargs;" \ 829 "tftp $loadaddr $bootfile;" \ 830 "tftp $fdtaddr $fdtfile;" \ 831 "bootm $loadaddr - $fdtaddr" 832 833 #define CONFIG_RAMBOOTCOMMAND \ 834 "setenv bootargs root=/dev/ram rw " \ 835 "console=$consoledev,$baudrate $othbootargs;" \ 836 "tftp $ramdiskaddr $ramdiskfile;" \ 837 "tftp $loadaddr $bootfile;" \ 838 "tftp $fdtaddr $fdtfile;" \ 839 "bootm $loadaddr $ramdiskaddr $fdtaddr" 840 841 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 842 843 #include <asm/fsl_secure_boot.h> 844 845 #ifdef CONFIG_SECURE_BOOT 846 /* Secure Boot target was not getting build for T4240 because of 847 * increased binary size. So the size is being reduced by removing USB 848 * which is anyways not used in Secure Environment. 849 */ 850 #undef CONFIG_CMD_USB 851 #define CONFIG_CMD_BLOB 852 #endif 853 854 #endif /* __CONFIG_H */ 855