1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 RDB board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_T4240RDB 14 #define CONFIG_PHYS_64BIT 15 16 #define CONFIG_FSL_SATA_V2 17 #define CONFIG_PCIE4 18 19 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 20 21 #ifdef CONFIG_RAMBOOT_PBL 22 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 23 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 24 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 25 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg 26 #endif 27 28 #define CONFIG_DDR_ECC 29 30 #define CONFIG_CMD_REGINFO 31 32 /* High Level Configuration Options */ 33 #define CONFIG_BOOKE 34 #define CONFIG_E500 /* BOOKE e500 family */ 35 #define CONFIG_E500MC /* BOOKE e500mc family */ 36 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 37 #define CONFIG_MP /* support multiple processors */ 38 39 #ifndef CONFIG_SYS_TEXT_BASE 40 #define CONFIG_SYS_TEXT_BASE 0xeff40000 41 #endif 42 43 #ifndef CONFIG_RESET_VECTOR_ADDRESS 44 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 45 #endif 46 47 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 48 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 49 #define CONFIG_FSL_IFC /* Enable IFC Support */ 50 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 51 #define CONFIG_PCI /* Enable PCI/PCIE */ 52 #define CONFIG_PCIE1 /* PCIE controler 1 */ 53 #define CONFIG_PCIE2 /* PCIE controler 2 */ 54 #define CONFIG_PCIE3 /* PCIE controler 3 */ 55 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 56 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 57 58 #define CONFIG_FSL_LAW /* Use common FSL init code */ 59 60 #define CONFIG_ENV_OVERWRITE 61 62 /* 63 * These can be toggled for performance analysis, otherwise use default. 64 */ 65 #define CONFIG_SYS_CACHE_STASHING 66 #define CONFIG_BTB /* toggle branch predition */ 67 #ifdef CONFIG_DDR_ECC 68 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 69 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 70 #endif 71 72 #define CONFIG_ENABLE_36BIT_PHYS 73 74 #define CONFIG_ADDR_MAP 75 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 76 77 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 78 #define CONFIG_SYS_MEMTEST_END 0x00400000 79 #define CONFIG_SYS_ALT_MEMTEST 80 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 81 82 /* 83 * Config the L3 Cache as L3 SRAM 84 */ 85 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 86 87 #define CONFIG_SYS_DCSRBAR 0xf0000000 88 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 89 90 /* 91 * DDR Setup 92 */ 93 #define CONFIG_VERY_BIG_RAM 94 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 95 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 96 97 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 98 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 99 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 100 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 101 102 #define CONFIG_DDR_SPD 103 #define CONFIG_SYS_FSL_DDR3 104 105 106 /* 107 * IFC Definitions 108 */ 109 #define CONFIG_SYS_FLASH_BASE 0xe0000000 110 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 111 112 113 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 114 115 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 116 #define CONFIG_MISC_INIT_R 117 118 #define CONFIG_HWCONFIG 119 120 /* define to use L1 as initial stack */ 121 #define CONFIG_L1_INIT_RAM 122 #define CONFIG_SYS_INIT_RAM_LOCK 123 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 124 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 125 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 126 /* The assembler doesn't like typecast */ 127 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 128 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 129 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 130 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 131 132 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 133 GENERATED_GBL_DATA_SIZE) 134 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 135 136 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 137 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 138 139 /* Serial Port - controlled on board with jumper J8 140 * open - index 2 141 * shorted - index 1 142 */ 143 #define CONFIG_CONS_INDEX 1 144 #define CONFIG_SYS_NS16550 145 #define CONFIG_SYS_NS16550_SERIAL 146 #define CONFIG_SYS_NS16550_REG_SIZE 1 147 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 148 149 #define CONFIG_SYS_BAUDRATE_TABLE \ 150 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 151 152 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 153 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 154 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 155 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 156 157 /* Use the HUSH parser */ 158 #define CONFIG_SYS_HUSH_PARSER 159 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 160 161 /* pass open firmware flat tree */ 162 #define CONFIG_OF_LIBFDT 163 #define CONFIG_OF_BOARD_SETUP 164 #define CONFIG_OF_STDOUT_VIA_ALIAS 165 166 /* new uImage format support */ 167 #define CONFIG_FIT 168 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 169 170 /* I2C */ 171 #define CONFIG_SYS_I2C 172 #define CONFIG_SYS_I2C_FSL 173 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 174 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 175 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 176 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 177 178 /* 179 * General PCI 180 * Memory space is mapped 1-1, but I/O space must start from 0. 181 */ 182 183 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 184 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 185 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 186 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 187 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 188 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 189 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 190 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 191 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 192 193 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 194 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 195 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 196 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 197 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 198 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 199 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 200 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 201 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 202 203 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 204 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 205 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 206 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 207 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 208 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 209 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 210 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 211 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 212 213 /* controller 4, Base address 203000 */ 214 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 215 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 216 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 217 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 218 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 219 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 220 221 #ifdef CONFIG_PCI 222 #define CONFIG_PCI_INDIRECT_BRIDGE 223 #define CONFIG_NET_MULTI 224 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 225 #define CONFIG_E1000 226 227 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 228 #define CONFIG_DOS_PARTITION 229 #endif /* CONFIG_PCI */ 230 231 /* SATA */ 232 #ifdef CONFIG_FSL_SATA_V2 233 #define CONFIG_LIBATA 234 #define CONFIG_FSL_SATA 235 236 #define CONFIG_SYS_SATA_MAX_DEVICE 2 237 #define CONFIG_SATA1 238 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 239 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 240 #define CONFIG_SATA2 241 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 242 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 243 244 #define CONFIG_LBA48 245 #define CONFIG_CMD_SATA 246 #define CONFIG_DOS_PARTITION 247 #define CONFIG_CMD_EXT2 248 #endif 249 250 #ifdef CONFIG_FMAN_ENET 251 #define CONFIG_MII /* MII PHY management */ 252 #define CONFIG_ETHPRIME "FM1@DTSEC1" 253 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 254 #endif 255 256 /* 257 * Environment 258 */ 259 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 260 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 261 262 /* 263 * Command line configuration. 264 */ 265 #include <config_cmd_default.h> 266 267 #define CONFIG_CMD_DHCP 268 #define CONFIG_CMD_ELF 269 #define CONFIG_CMD_ERRATA 270 #define CONFIG_CMD_GREPENV 271 #define CONFIG_CMD_IRQ 272 #define CONFIG_CMD_I2C 273 #define CONFIG_CMD_MII 274 #define CONFIG_CMD_PING 275 #define CONFIG_CMD_SETEXPR 276 277 #ifdef CONFIG_PCI 278 #define CONFIG_CMD_PCI 279 #define CONFIG_CMD_NET 280 #endif 281 282 /* 283 * Miscellaneous configurable options 284 */ 285 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 286 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 287 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 288 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 289 #ifdef CONFIG_CMD_KGDB 290 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 291 #else 292 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 293 #endif 294 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 295 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 296 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 297 298 /* 299 * For booting Linux, the board info and command line data 300 * have to be in the first 64 MB of memory, since this is 301 * the maximum mapped by the Linux kernel during initialization. 302 */ 303 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 304 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 305 306 #ifdef CONFIG_CMD_KGDB 307 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 308 #endif 309 310 /* 311 * Environment Configuration 312 */ 313 #define CONFIG_ROOTPATH "/opt/nfsroot" 314 #define CONFIG_BOOTFILE "uImage" 315 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 316 317 /* default location for tftp and bootm */ 318 #define CONFIG_LOADADDR 1000000 319 320 321 #define CONFIG_BAUDRATE 115200 322 323 #define CONFIG_HVBOOT \ 324 "setenv bootargs config-addr=0x60000000; " \ 325 "bootm 0x01000000 - 0x00f00000" 326 327 #ifdef CONFIG_SYS_NO_FLASH 328 #ifndef CONFIG_RAMBOOT_PBL 329 #define CONFIG_ENV_IS_NOWHERE 330 #endif 331 #else 332 #define CONFIG_FLASH_CFI_DRIVER 333 #define CONFIG_SYS_FLASH_CFI 334 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 335 #endif 336 337 #if defined(CONFIG_SPIFLASH) 338 #define CONFIG_SYS_EXTRA_ENV_RELOC 339 #define CONFIG_ENV_IS_IN_SPI_FLASH 340 #define CONFIG_ENV_SPI_BUS 0 341 #define CONFIG_ENV_SPI_CS 0 342 #define CONFIG_ENV_SPI_MAX_HZ 10000000 343 #define CONFIG_ENV_SPI_MODE 0 344 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 345 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 346 #define CONFIG_ENV_SECT_SIZE 0x10000 347 #elif defined(CONFIG_SDCARD) 348 #define CONFIG_SYS_EXTRA_ENV_RELOC 349 #define CONFIG_ENV_IS_IN_MMC 350 #define CONFIG_SYS_MMC_ENV_DEV 0 351 #define CONFIG_ENV_SIZE 0x2000 352 #define CONFIG_ENV_OFFSET (512 * 1658) 353 #elif defined(CONFIG_NAND) 354 #define CONFIG_SYS_EXTRA_ENV_RELOC 355 #define CONFIG_ENV_IS_IN_NAND 356 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 357 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 358 #elif defined(CONFIG_ENV_IS_NOWHERE) 359 #define CONFIG_ENV_SIZE 0x2000 360 #else 361 #define CONFIG_ENV_IS_IN_FLASH 362 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 363 #define CONFIG_ENV_SIZE 0x2000 364 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 365 #endif 366 367 #define CONFIG_SYS_CLK_FREQ 66666666 368 #define CONFIG_DDR_CLK_FREQ 133333333 369 370 #ifndef __ASSEMBLY__ 371 unsigned long get_board_sys_clk(void); 372 unsigned long get_board_ddr_clk(void); 373 #endif 374 375 /* 376 * DDR Setup 377 */ 378 #define CONFIG_SYS_SPD_BUS_NUM 0 379 #define SPD_EEPROM_ADDRESS1 0x52 380 #define SPD_EEPROM_ADDRESS2 0x54 381 #define SPD_EEPROM_ADDRESS3 0x56 382 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 383 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 384 385 /* 386 * IFC Definitions 387 */ 388 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 389 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 390 + 0x8000000) | \ 391 CSPR_PORT_SIZE_16 | \ 392 CSPR_MSEL_NOR | \ 393 CSPR_V) 394 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 395 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 396 CSPR_PORT_SIZE_16 | \ 397 CSPR_MSEL_NOR | \ 398 CSPR_V) 399 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 400 /* NOR Flash Timing Params */ 401 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 402 403 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 404 FTIM0_NOR_TEADC(0x5) | \ 405 FTIM0_NOR_TEAHC(0x5)) 406 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 407 FTIM1_NOR_TRAD_NOR(0x1A) |\ 408 FTIM1_NOR_TSEQRAD_NOR(0x13)) 409 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 410 FTIM2_NOR_TCH(0x4) | \ 411 FTIM2_NOR_TWPH(0x0E) | \ 412 FTIM2_NOR_TWP(0x1c)) 413 #define CONFIG_SYS_NOR_FTIM3 0x0 414 415 #define CONFIG_SYS_FLASH_QUIET_TEST 416 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 417 418 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 419 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 420 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 421 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 422 423 #define CONFIG_SYS_FLASH_EMPTY_INFO 424 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 425 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 426 427 /* NAND Flash on IFC */ 428 #define CONFIG_NAND_FSL_IFC 429 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 430 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 431 #define CONFIG_SYS_NAND_BASE 0xff800000 432 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 433 434 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 435 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 436 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 437 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 438 | CSPR_V) 439 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 440 441 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 442 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 443 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 444 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 445 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 446 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 447 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 448 449 #define CONFIG_SYS_NAND_ONFI_DETECTION 450 451 /* ONFI NAND Flash mode0 Timing Params */ 452 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 453 FTIM0_NAND_TWP(0x18) | \ 454 FTIM0_NAND_TWCHT(0x07) | \ 455 FTIM0_NAND_TWH(0x0a)) 456 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 457 FTIM1_NAND_TWBE(0x39) | \ 458 FTIM1_NAND_TRR(0x0e) | \ 459 FTIM1_NAND_TRP(0x18)) 460 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 461 FTIM2_NAND_TREH(0x0a) | \ 462 FTIM2_NAND_TWHRE(0x1e)) 463 #define CONFIG_SYS_NAND_FTIM3 0x0 464 465 #define CONFIG_SYS_NAND_DDR_LAW 11 466 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 467 #define CONFIG_SYS_MAX_NAND_DEVICE 1 468 #define CONFIG_MTD_NAND_VERIFY_WRITE 469 #define CONFIG_CMD_NAND 470 471 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 472 473 #if defined(CONFIG_NAND) 474 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 475 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 476 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 477 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 478 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 479 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 480 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 481 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 482 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 483 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 484 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 485 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 486 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 487 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 488 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 489 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 490 #else 491 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 492 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 493 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 494 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 495 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 496 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 497 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 498 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 499 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 500 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 501 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 502 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 503 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 504 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 505 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 506 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 507 #endif 508 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 509 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 510 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 511 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 512 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 513 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 514 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 515 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 516 517 #if defined(CONFIG_RAMBOOT_PBL) 518 #define CONFIG_SYS_RAMBOOT 519 #endif 520 521 522 /* I2C */ 523 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 524 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 525 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 526 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 527 528 #define I2C_MUX_CH_DEFAULT 0x8 529 #define I2C_MUX_CH_VOL_MONITOR 0xa 530 #define I2C_MUX_CH_VSC3316_FS 0xc 531 #define I2C_MUX_CH_VSC3316_BS 0xd 532 533 /* Voltage monitor on channel 2*/ 534 #define I2C_VOL_MONITOR_ADDR 0x40 535 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 536 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 537 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 538 539 /* 540 * eSPI - Enhanced SPI 541 */ 542 #define CONFIG_FSL_ESPI 543 #define CONFIG_SPI_FLASH 544 #define CONFIG_SPI_FLASH_SST 545 #define CONFIG_CMD_SF 546 #define CONFIG_SF_DEFAULT_SPEED 10000000 547 #define CONFIG_SF_DEFAULT_MODE 0 548 549 550 /* Qman/Bman */ 551 #ifndef CONFIG_NOBQFMAN 552 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 553 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 554 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 555 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 556 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 557 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 558 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 559 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 560 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 561 562 #define CONFIG_SYS_DPAA_FMAN 563 #define CONFIG_SYS_DPAA_PME 564 #define CONFIG_SYS_PMAN 565 #define CONFIG_SYS_DPAA_DCE 566 #define CONFIG_SYS_DPAA_RMAN 567 #define CONFIG_SYS_INTERLAKEN 568 569 /* Default address of microcode for the Linux Fman driver */ 570 #if defined(CONFIG_SPIFLASH) 571 /* 572 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 573 * env, so we got 0x110000. 574 */ 575 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 576 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 577 #elif defined(CONFIG_SDCARD) 578 /* 579 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 580 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 581 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 582 */ 583 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 584 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 585 #elif defined(CONFIG_NAND) 586 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 587 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 588 #else 589 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 590 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 591 #endif 592 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 593 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 594 #endif /* CONFIG_NOBQFMAN */ 595 596 #ifdef CONFIG_SYS_DPAA_FMAN 597 #define CONFIG_FMAN_ENET 598 #define CONFIG_PHYLIB_10G 599 #define CONFIG_PHY_VITESSE 600 #define CONFIG_PHY_CORTINA 601 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 602 #define CONFIG_CORTINA_FW_LENGTH 0x40000 603 #define CONFIG_PHY_TERANETICS 604 #define SGMII_PHY_ADDR1 0x0 605 #define SGMII_PHY_ADDR2 0x1 606 #define SGMII_PHY_ADDR3 0x2 607 #define SGMII_PHY_ADDR4 0x3 608 #define SGMII_PHY_ADDR5 0x4 609 #define SGMII_PHY_ADDR6 0x5 610 #define SGMII_PHY_ADDR7 0x6 611 #define SGMII_PHY_ADDR8 0x7 612 #define FM1_10GEC1_PHY_ADDR 0x10 613 #define FM1_10GEC2_PHY_ADDR 0x11 614 #define FM2_10GEC1_PHY_ADDR 0x12 615 #define FM2_10GEC2_PHY_ADDR 0x13 616 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 617 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 618 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 619 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 620 #endif 621 622 623 /* SATA */ 624 #ifdef CONFIG_FSL_SATA_V2 625 #define CONFIG_LIBATA 626 #define CONFIG_FSL_SATA 627 628 #define CONFIG_SYS_SATA_MAX_DEVICE 2 629 #define CONFIG_SATA1 630 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 631 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 632 #define CONFIG_SATA2 633 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 634 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 635 636 #define CONFIG_LBA48 637 #define CONFIG_CMD_SATA 638 #define CONFIG_DOS_PARTITION 639 #define CONFIG_CMD_EXT2 640 #endif 641 642 #ifdef CONFIG_FMAN_ENET 643 #define CONFIG_MII /* MII PHY management */ 644 #define CONFIG_ETHPRIME "FM1@DTSEC1" 645 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 646 #endif 647 648 /* 649 * USB 650 */ 651 #define CONFIG_CMD_USB 652 #define CONFIG_USB_STORAGE 653 #define CONFIG_USB_EHCI 654 #define CONFIG_USB_EHCI_FSL 655 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 656 #define CONFIG_CMD_EXT2 657 #define CONFIG_HAS_FSL_DR_USB 658 659 #define CONFIG_MMC 660 661 #ifdef CONFIG_MMC 662 #define CONFIG_FSL_ESDHC 663 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 664 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 665 #define CONFIG_CMD_MMC 666 #define CONFIG_GENERIC_MMC 667 #define CONFIG_CMD_EXT2 668 #define CONFIG_CMD_FAT 669 #define CONFIG_DOS_PARTITION 670 #endif 671 672 /* Hash command with SHA acceleration supported in hardware */ 673 #ifdef CONFIG_FSL_CAAM 674 #define CONFIG_CMD_HASH 675 #define CONFIG_SHA_HW_ACCEL 676 #endif 677 678 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 679 680 #define __USB_PHY_TYPE utmi 681 682 /* 683 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 684 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 685 * interleaving. It can be cacheline, page, bank, superbank. 686 * See doc/README.fsl-ddr for details. 687 */ 688 #ifdef CONFIG_PPC_T4240 689 #define CTRL_INTLV_PREFERED 3way_4KB 690 #else 691 #define CTRL_INTLV_PREFERED cacheline 692 #endif 693 694 #define CONFIG_EXTRA_ENV_SETTINGS \ 695 "hwconfig=fsl_ddr:" \ 696 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 697 "bank_intlv=auto;" \ 698 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 699 "netdev=eth0\0" \ 700 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 701 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 702 "tftpflash=tftpboot $loadaddr $uboot && " \ 703 "protect off $ubootaddr +$filesize && " \ 704 "erase $ubootaddr +$filesize && " \ 705 "cp.b $loadaddr $ubootaddr $filesize && " \ 706 "protect on $ubootaddr +$filesize && " \ 707 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 708 "consoledev=ttyS0\0" \ 709 "ramdiskaddr=2000000\0" \ 710 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 711 "fdtaddr=c00000\0" \ 712 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 713 "bdev=sda3\0" 714 715 #define CONFIG_HVBOOT \ 716 "setenv bootargs config-addr=0x60000000; " \ 717 "bootm 0x01000000 - 0x00f00000" 718 719 #define CONFIG_LINUX \ 720 "setenv bootargs root=/dev/ram rw " \ 721 "console=$consoledev,$baudrate $othbootargs;" \ 722 "setenv ramdiskaddr 0x02000000;" \ 723 "setenv fdtaddr 0x00c00000;" \ 724 "setenv loadaddr 0x1000000;" \ 725 "bootm $loadaddr $ramdiskaddr $fdtaddr" 726 727 #define CONFIG_HDBOOT \ 728 "setenv bootargs root=/dev/$bdev rw " \ 729 "console=$consoledev,$baudrate $othbootargs;" \ 730 "tftp $loadaddr $bootfile;" \ 731 "tftp $fdtaddr $fdtfile;" \ 732 "bootm $loadaddr - $fdtaddr" 733 734 #define CONFIG_NFSBOOTCOMMAND \ 735 "setenv bootargs root=/dev/nfs rw " \ 736 "nfsroot=$serverip:$rootpath " \ 737 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 738 "console=$consoledev,$baudrate $othbootargs;" \ 739 "tftp $loadaddr $bootfile;" \ 740 "tftp $fdtaddr $fdtfile;" \ 741 "bootm $loadaddr - $fdtaddr" 742 743 #define CONFIG_RAMBOOTCOMMAND \ 744 "setenv bootargs root=/dev/ram rw " \ 745 "console=$consoledev,$baudrate $othbootargs;" \ 746 "tftp $ramdiskaddr $ramdiskfile;" \ 747 "tftp $loadaddr $bootfile;" \ 748 "tftp $fdtaddr $fdtfile;" \ 749 "bootm $loadaddr $ramdiskaddr $fdtaddr" 750 751 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 752 753 #include <asm/fsl_secure_boot.h> 754 755 #ifdef CONFIG_SECURE_BOOT 756 /* Secure Boot target was not getting build for T4240 because of 757 * increased binary size. So the size is being reduced by removing USB 758 * which is anyways not used in Secure Environment. 759 */ 760 #undef CONFIG_CMD_USB 761 #endif 762 763 #endif /* __CONFIG_H */ 764