1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 RDB board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_T4240RDB 14 #define CONFIG_PHYS_64BIT 15 #define CONFIG_DISPLAY_BOARDINFO 16 17 #define CONFIG_FSL_SATA_V2 18 #define CONFIG_PCIE4 19 20 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 21 22 #ifdef CONFIG_RAMBOOT_PBL 23 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 24 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg 25 #ifndef CONFIG_SDCARD 26 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 27 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 28 #else 29 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 30 #define CONFIG_SPL_ENV_SUPPORT 31 #define CONFIG_SPL_SERIAL_SUPPORT 32 #define CONFIG_SPL_FLUSH_IMAGE 33 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 34 #define CONFIG_SPL_LIBGENERIC_SUPPORT 35 #define CONFIG_SPL_LIBCOMMON_SUPPORT 36 #define CONFIG_SPL_I2C_SUPPORT 37 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 38 #define CONFIG_FSL_LAW /* Use common FSL init code */ 39 #define CONFIG_SYS_TEXT_BASE 0x00201000 40 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 41 #define CONFIG_SPL_PAD_TO 0x40000 42 #define CONFIG_SPL_MAX_SIZE 0x28000 43 #define RESET_VECTOR_OFFSET 0x27FFC 44 #define BOOT_PAGE_OFFSET 0x27000 45 46 #ifdef CONFIG_SDCARD 47 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 48 #define CONFIG_SPL_MMC_SUPPORT 49 #define CONFIG_SPL_MMC_MINIMAL 50 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 51 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 52 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 53 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 54 #ifndef CONFIG_SPL_BUILD 55 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 56 #endif 57 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 58 #define CONFIG_SPL_MMC_BOOT 59 #endif 60 61 #ifdef CONFIG_SPL_BUILD 62 #define CONFIG_SPL_SKIP_RELOCATE 63 #define CONFIG_SPL_COMMON_INIT_DDR 64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 65 #define CONFIG_SYS_NO_FLASH 66 #endif 67 68 #endif 69 #endif /* CONFIG_RAMBOOT_PBL */ 70 71 #define CONFIG_DDR_ECC 72 73 #define CONFIG_CMD_REGINFO 74 75 /* High Level Configuration Options */ 76 #define CONFIG_BOOKE 77 #define CONFIG_E500 /* BOOKE e500 family */ 78 #define CONFIG_E500MC /* BOOKE e500mc family */ 79 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 80 #define CONFIG_MP /* support multiple processors */ 81 82 #ifndef CONFIG_SYS_TEXT_BASE 83 #define CONFIG_SYS_TEXT_BASE 0xeff40000 84 #endif 85 86 #ifndef CONFIG_RESET_VECTOR_ADDRESS 87 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 88 #endif 89 90 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 91 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 92 #define CONFIG_FSL_IFC /* Enable IFC Support */ 93 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 94 #define CONFIG_PCI /* Enable PCI/PCIE */ 95 #define CONFIG_PCIE1 /* PCIE controler 1 */ 96 #define CONFIG_PCIE2 /* PCIE controler 2 */ 97 #define CONFIG_PCIE3 /* PCIE controler 3 */ 98 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 99 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 100 101 #define CONFIG_FSL_LAW /* Use common FSL init code */ 102 103 #define CONFIG_ENV_OVERWRITE 104 105 /* 106 * These can be toggled for performance analysis, otherwise use default. 107 */ 108 #define CONFIG_SYS_CACHE_STASHING 109 #define CONFIG_BTB /* toggle branch predition */ 110 #ifdef CONFIG_DDR_ECC 111 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 112 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 113 #endif 114 115 #define CONFIG_ENABLE_36BIT_PHYS 116 117 #define CONFIG_ADDR_MAP 118 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 119 120 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 121 #define CONFIG_SYS_MEMTEST_END 0x00400000 122 #define CONFIG_SYS_ALT_MEMTEST 123 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 124 125 /* 126 * Config the L3 Cache as L3 SRAM 127 */ 128 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 129 #define CONFIG_SYS_L3_SIZE (512 << 10) 130 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 131 #ifdef CONFIG_RAMBOOT_PBL 132 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 133 #endif 134 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 135 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 136 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 137 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 138 139 #define CONFIG_SYS_DCSRBAR 0xf0000000 140 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 141 142 /* 143 * DDR Setup 144 */ 145 #define CONFIG_VERY_BIG_RAM 146 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 147 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 148 149 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 150 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 151 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 152 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 153 154 #define CONFIG_DDR_SPD 155 #define CONFIG_SYS_FSL_DDR3 156 157 158 /* 159 * IFC Definitions 160 */ 161 #define CONFIG_SYS_FLASH_BASE 0xe0000000 162 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 163 164 165 #ifdef CONFIG_SPL_BUILD 166 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 167 #else 168 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 169 #endif 170 171 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 172 #define CONFIG_MISC_INIT_R 173 174 #define CONFIG_HWCONFIG 175 176 /* define to use L1 as initial stack */ 177 #define CONFIG_L1_INIT_RAM 178 #define CONFIG_SYS_INIT_RAM_LOCK 179 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 180 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 182 /* The assembler doesn't like typecast */ 183 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 184 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 185 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 186 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 187 188 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 189 GENERATED_GBL_DATA_SIZE) 190 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 191 192 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 193 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 194 195 /* Serial Port - controlled on board with jumper J8 196 * open - index 2 197 * shorted - index 1 198 */ 199 #define CONFIG_CONS_INDEX 1 200 #define CONFIG_SYS_NS16550_SERIAL 201 #define CONFIG_SYS_NS16550_REG_SIZE 1 202 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 203 204 #define CONFIG_SYS_BAUDRATE_TABLE \ 205 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 206 207 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 208 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 209 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 210 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 211 212 /* Use the HUSH parser */ 213 #define CONFIG_SYS_HUSH_PARSER 214 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 215 216 /* pass open firmware flat tree */ 217 #define CONFIG_OF_LIBFDT 218 #define CONFIG_OF_BOARD_SETUP 219 #define CONFIG_OF_STDOUT_VIA_ALIAS 220 221 /* new uImage format support */ 222 #define CONFIG_FIT 223 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 224 225 /* I2C */ 226 #define CONFIG_SYS_I2C 227 #define CONFIG_SYS_I2C_FSL 228 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 229 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 230 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 231 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 232 233 /* 234 * General PCI 235 * Memory space is mapped 1-1, but I/O space must start from 0. 236 */ 237 238 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 239 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 240 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 241 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 242 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 243 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 244 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 245 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 246 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 247 248 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 249 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 250 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 251 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 252 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 253 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 254 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 255 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 256 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 257 258 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 259 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 260 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 261 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 262 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 263 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 264 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 265 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 266 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 267 268 /* controller 4, Base address 203000 */ 269 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 270 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 271 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 272 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 273 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 274 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 275 276 #ifdef CONFIG_PCI 277 #define CONFIG_PCI_INDIRECT_BRIDGE 278 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 279 280 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 281 #define CONFIG_DOS_PARTITION 282 #endif /* CONFIG_PCI */ 283 284 /* SATA */ 285 #ifdef CONFIG_FSL_SATA_V2 286 #define CONFIG_LIBATA 287 #define CONFIG_FSL_SATA 288 289 #define CONFIG_SYS_SATA_MAX_DEVICE 2 290 #define CONFIG_SATA1 291 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 292 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 293 #define CONFIG_SATA2 294 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 295 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 296 297 #define CONFIG_LBA48 298 #define CONFIG_CMD_SATA 299 #define CONFIG_DOS_PARTITION 300 #define CONFIG_CMD_EXT2 301 #endif 302 303 #ifdef CONFIG_FMAN_ENET 304 #define CONFIG_MII /* MII PHY management */ 305 #define CONFIG_ETHPRIME "FM1@DTSEC1" 306 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 307 #endif 308 309 /* 310 * Environment 311 */ 312 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 313 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 314 315 /* 316 * Command line configuration. 317 */ 318 #define CONFIG_CMD_DHCP 319 #define CONFIG_CMD_ERRATA 320 #define CONFIG_CMD_GREPENV 321 #define CONFIG_CMD_IRQ 322 #define CONFIG_CMD_I2C 323 #define CONFIG_CMD_MII 324 #define CONFIG_CMD_PING 325 326 #ifdef CONFIG_PCI 327 #define CONFIG_CMD_PCI 328 #endif 329 330 /* 331 * Miscellaneous configurable options 332 */ 333 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 334 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 335 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 336 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 337 #ifdef CONFIG_CMD_KGDB 338 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 339 #else 340 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 341 #endif 342 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 343 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 344 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 345 346 /* 347 * For booting Linux, the board info and command line data 348 * have to be in the first 64 MB of memory, since this is 349 * the maximum mapped by the Linux kernel during initialization. 350 */ 351 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 352 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 353 354 #ifdef CONFIG_CMD_KGDB 355 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 356 #endif 357 358 /* 359 * Environment Configuration 360 */ 361 #define CONFIG_ROOTPATH "/opt/nfsroot" 362 #define CONFIG_BOOTFILE "uImage" 363 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 364 365 /* default location for tftp and bootm */ 366 #define CONFIG_LOADADDR 1000000 367 368 369 #define CONFIG_BAUDRATE 115200 370 371 #define CONFIG_HVBOOT \ 372 "setenv bootargs config-addr=0x60000000; " \ 373 "bootm 0x01000000 - 0x00f00000" 374 375 #ifdef CONFIG_SYS_NO_FLASH 376 #ifndef CONFIG_RAMBOOT_PBL 377 #define CONFIG_ENV_IS_NOWHERE 378 #endif 379 #else 380 #define CONFIG_FLASH_CFI_DRIVER 381 #define CONFIG_SYS_FLASH_CFI 382 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 383 #endif 384 385 #if defined(CONFIG_SPIFLASH) 386 #define CONFIG_SYS_EXTRA_ENV_RELOC 387 #define CONFIG_ENV_IS_IN_SPI_FLASH 388 #define CONFIG_ENV_SPI_BUS 0 389 #define CONFIG_ENV_SPI_CS 0 390 #define CONFIG_ENV_SPI_MAX_HZ 10000000 391 #define CONFIG_ENV_SPI_MODE 0 392 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 393 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 394 #define CONFIG_ENV_SECT_SIZE 0x10000 395 #elif defined(CONFIG_SDCARD) 396 #define CONFIG_SYS_EXTRA_ENV_RELOC 397 #define CONFIG_ENV_IS_IN_MMC 398 #define CONFIG_SYS_MMC_ENV_DEV 0 399 #define CONFIG_ENV_SIZE 0x2000 400 #define CONFIG_ENV_OFFSET (512 * 0x800) 401 #elif defined(CONFIG_NAND) 402 #define CONFIG_SYS_EXTRA_ENV_RELOC 403 #define CONFIG_ENV_IS_IN_NAND 404 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 405 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 406 #elif defined(CONFIG_ENV_IS_NOWHERE) 407 #define CONFIG_ENV_SIZE 0x2000 408 #else 409 #define CONFIG_ENV_IS_IN_FLASH 410 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 411 #define CONFIG_ENV_SIZE 0x2000 412 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 413 #endif 414 415 #define CONFIG_SYS_CLK_FREQ 66666666 416 #define CONFIG_DDR_CLK_FREQ 133333333 417 418 #ifndef __ASSEMBLY__ 419 unsigned long get_board_sys_clk(void); 420 unsigned long get_board_ddr_clk(void); 421 #endif 422 423 /* 424 * DDR Setup 425 */ 426 #define CONFIG_SYS_SPD_BUS_NUM 0 427 #define SPD_EEPROM_ADDRESS1 0x52 428 #define SPD_EEPROM_ADDRESS2 0x54 429 #define SPD_EEPROM_ADDRESS3 0x56 430 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 431 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 432 433 /* 434 * IFC Definitions 435 */ 436 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 437 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 438 + 0x8000000) | \ 439 CSPR_PORT_SIZE_16 | \ 440 CSPR_MSEL_NOR | \ 441 CSPR_V) 442 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 443 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 444 CSPR_PORT_SIZE_16 | \ 445 CSPR_MSEL_NOR | \ 446 CSPR_V) 447 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 448 /* NOR Flash Timing Params */ 449 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 450 451 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 452 FTIM0_NOR_TEADC(0x5) | \ 453 FTIM0_NOR_TEAHC(0x5)) 454 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 455 FTIM1_NOR_TRAD_NOR(0x1A) |\ 456 FTIM1_NOR_TSEQRAD_NOR(0x13)) 457 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 458 FTIM2_NOR_TCH(0x4) | \ 459 FTIM2_NOR_TWPH(0x0E) | \ 460 FTIM2_NOR_TWP(0x1c)) 461 #define CONFIG_SYS_NOR_FTIM3 0x0 462 463 #define CONFIG_SYS_FLASH_QUIET_TEST 464 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 465 466 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 467 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 468 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 469 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 470 471 #define CONFIG_SYS_FLASH_EMPTY_INFO 472 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 473 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 474 475 /* NAND Flash on IFC */ 476 #define CONFIG_NAND_FSL_IFC 477 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 478 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 479 #define CONFIG_SYS_NAND_BASE 0xff800000 480 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 481 482 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 483 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 484 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 485 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 486 | CSPR_V) 487 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 488 489 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 490 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 491 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 492 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 493 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 494 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 495 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 496 497 #define CONFIG_SYS_NAND_ONFI_DETECTION 498 499 /* ONFI NAND Flash mode0 Timing Params */ 500 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 501 FTIM0_NAND_TWP(0x18) | \ 502 FTIM0_NAND_TWCHT(0x07) | \ 503 FTIM0_NAND_TWH(0x0a)) 504 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 505 FTIM1_NAND_TWBE(0x39) | \ 506 FTIM1_NAND_TRR(0x0e) | \ 507 FTIM1_NAND_TRP(0x18)) 508 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 509 FTIM2_NAND_TREH(0x0a) | \ 510 FTIM2_NAND_TWHRE(0x1e)) 511 #define CONFIG_SYS_NAND_FTIM3 0x0 512 513 #define CONFIG_SYS_NAND_DDR_LAW 11 514 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 515 #define CONFIG_SYS_MAX_NAND_DEVICE 1 516 #define CONFIG_CMD_NAND 517 518 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 519 520 #if defined(CONFIG_NAND) 521 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 522 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 523 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 524 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 525 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 526 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 527 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 528 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 529 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 530 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 531 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 532 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 533 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 534 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 535 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 536 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 537 #else 538 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 539 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 540 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 541 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 542 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 543 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 544 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 545 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 546 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 547 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 548 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 549 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 550 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 551 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 552 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 553 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 554 #endif 555 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 556 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 557 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 558 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 559 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 560 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 561 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 562 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 563 564 /* CPLD on IFC */ 565 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 566 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 567 #define CONFIG_SYS_CSPR3_EXT (0xf) 568 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 569 | CSPR_PORT_SIZE_8 \ 570 | CSPR_MSEL_GPCM \ 571 | CSPR_V) 572 573 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 574 #define CONFIG_SYS_CSOR3 0x0 575 576 /* CPLD Timing parameters for IFC CS3 */ 577 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 578 FTIM0_GPCM_TEADC(0x0e) | \ 579 FTIM0_GPCM_TEAHC(0x0e)) 580 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 581 FTIM1_GPCM_TRAD(0x1f)) 582 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 583 FTIM2_GPCM_TCH(0x8) | \ 584 FTIM2_GPCM_TWP(0x1f)) 585 #define CONFIG_SYS_CS3_FTIM3 0x0 586 587 #if defined(CONFIG_RAMBOOT_PBL) 588 #define CONFIG_SYS_RAMBOOT 589 #endif 590 591 592 /* I2C */ 593 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 594 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 595 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 596 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 597 598 #define I2C_MUX_CH_DEFAULT 0x8 599 #define I2C_MUX_CH_VOL_MONITOR 0xa 600 #define I2C_MUX_CH_VSC3316_FS 0xc 601 #define I2C_MUX_CH_VSC3316_BS 0xd 602 603 /* Voltage monitor on channel 2*/ 604 #define I2C_VOL_MONITOR_ADDR 0x40 605 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 606 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 607 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 608 609 /* 610 * eSPI - Enhanced SPI 611 */ 612 #define CONFIG_CMD_SF 613 #define CONFIG_SF_DEFAULT_SPEED 10000000 614 #define CONFIG_SF_DEFAULT_MODE 0 615 616 617 /* Qman/Bman */ 618 #ifndef CONFIG_NOBQFMAN 619 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 620 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 621 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 622 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 623 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 624 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 625 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 626 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 627 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 628 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 629 CONFIG_SYS_BMAN_CENA_SIZE) 630 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 631 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 632 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 633 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 634 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 635 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 636 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 637 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 638 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 639 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 640 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 641 CONFIG_SYS_QMAN_CENA_SIZE) 642 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 643 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 644 645 #define CONFIG_SYS_DPAA_FMAN 646 #define CONFIG_SYS_DPAA_PME 647 #define CONFIG_SYS_PMAN 648 #define CONFIG_SYS_DPAA_DCE 649 #define CONFIG_SYS_DPAA_RMAN 650 #define CONFIG_SYS_INTERLAKEN 651 652 /* Default address of microcode for the Linux Fman driver */ 653 #if defined(CONFIG_SPIFLASH) 654 /* 655 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 656 * env, so we got 0x110000. 657 */ 658 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 659 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 660 #elif defined(CONFIG_SDCARD) 661 /* 662 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 663 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 664 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 665 */ 666 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 667 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 668 #elif defined(CONFIG_NAND) 669 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 670 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 671 #else 672 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 673 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 674 #endif 675 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 676 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 677 #endif /* CONFIG_NOBQFMAN */ 678 679 #ifdef CONFIG_SYS_DPAA_FMAN 680 #define CONFIG_FMAN_ENET 681 #define CONFIG_PHYLIB_10G 682 #define CONFIG_PHY_VITESSE 683 #define CONFIG_PHY_CORTINA 684 #define CONFIG_SYS_CORTINA_FW_IN_NOR 685 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 686 #define CONFIG_CORTINA_FW_LENGTH 0x40000 687 #define CONFIG_PHY_TERANETICS 688 #define SGMII_PHY_ADDR1 0x0 689 #define SGMII_PHY_ADDR2 0x1 690 #define SGMII_PHY_ADDR3 0x2 691 #define SGMII_PHY_ADDR4 0x3 692 #define SGMII_PHY_ADDR5 0x4 693 #define SGMII_PHY_ADDR6 0x5 694 #define SGMII_PHY_ADDR7 0x6 695 #define SGMII_PHY_ADDR8 0x7 696 #define FM1_10GEC1_PHY_ADDR 0x10 697 #define FM1_10GEC2_PHY_ADDR 0x11 698 #define FM2_10GEC1_PHY_ADDR 0x12 699 #define FM2_10GEC2_PHY_ADDR 0x13 700 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 701 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 702 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 703 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 704 #endif 705 706 707 /* SATA */ 708 #ifdef CONFIG_FSL_SATA_V2 709 #define CONFIG_LIBATA 710 #define CONFIG_FSL_SATA 711 712 #define CONFIG_SYS_SATA_MAX_DEVICE 2 713 #define CONFIG_SATA1 714 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 715 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 716 #define CONFIG_SATA2 717 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 718 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 719 720 #define CONFIG_LBA48 721 #define CONFIG_CMD_SATA 722 #define CONFIG_DOS_PARTITION 723 #define CONFIG_CMD_EXT2 724 #endif 725 726 #ifdef CONFIG_FMAN_ENET 727 #define CONFIG_MII /* MII PHY management */ 728 #define CONFIG_ETHPRIME "FM1@DTSEC1" 729 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 730 #endif 731 732 /* 733 * USB 734 */ 735 #define CONFIG_CMD_USB 736 #define CONFIG_USB_STORAGE 737 #define CONFIG_USB_EHCI 738 #define CONFIG_USB_EHCI_FSL 739 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 740 #define CONFIG_CMD_EXT2 741 #define CONFIG_HAS_FSL_DR_USB 742 743 #define CONFIG_MMC 744 745 #ifdef CONFIG_MMC 746 #define CONFIG_FSL_ESDHC 747 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 748 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 749 #define CONFIG_CMD_MMC 750 #define CONFIG_GENERIC_MMC 751 #define CONFIG_CMD_EXT2 752 #define CONFIG_CMD_FAT 753 #define CONFIG_DOS_PARTITION 754 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 755 #endif 756 757 /* Hash command with SHA acceleration supported in hardware */ 758 #ifdef CONFIG_FSL_CAAM 759 #define CONFIG_CMD_HASH 760 #define CONFIG_SHA_HW_ACCEL 761 #endif 762 763 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 764 765 #define __USB_PHY_TYPE utmi 766 767 /* 768 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 769 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 770 * interleaving. It can be cacheline, page, bank, superbank. 771 * See doc/README.fsl-ddr for details. 772 */ 773 #ifdef CONFIG_PPC_T4240 774 #define CTRL_INTLV_PREFERED 3way_4KB 775 #else 776 #define CTRL_INTLV_PREFERED cacheline 777 #endif 778 779 #define CONFIG_EXTRA_ENV_SETTINGS \ 780 "hwconfig=fsl_ddr:" \ 781 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 782 "bank_intlv=auto;" \ 783 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 784 "netdev=eth0\0" \ 785 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 786 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 787 "tftpflash=tftpboot $loadaddr $uboot && " \ 788 "protect off $ubootaddr +$filesize && " \ 789 "erase $ubootaddr +$filesize && " \ 790 "cp.b $loadaddr $ubootaddr $filesize && " \ 791 "protect on $ubootaddr +$filesize && " \ 792 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 793 "consoledev=ttyS0\0" \ 794 "ramdiskaddr=2000000\0" \ 795 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 796 "fdtaddr=c00000\0" \ 797 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 798 "bdev=sda3\0" 799 800 #define CONFIG_HVBOOT \ 801 "setenv bootargs config-addr=0x60000000; " \ 802 "bootm 0x01000000 - 0x00f00000" 803 804 #define CONFIG_LINUX \ 805 "setenv bootargs root=/dev/ram rw " \ 806 "console=$consoledev,$baudrate $othbootargs;" \ 807 "setenv ramdiskaddr 0x02000000;" \ 808 "setenv fdtaddr 0x00c00000;" \ 809 "setenv loadaddr 0x1000000;" \ 810 "bootm $loadaddr $ramdiskaddr $fdtaddr" 811 812 #define CONFIG_HDBOOT \ 813 "setenv bootargs root=/dev/$bdev rw " \ 814 "console=$consoledev,$baudrate $othbootargs;" \ 815 "tftp $loadaddr $bootfile;" \ 816 "tftp $fdtaddr $fdtfile;" \ 817 "bootm $loadaddr - $fdtaddr" 818 819 #define CONFIG_NFSBOOTCOMMAND \ 820 "setenv bootargs root=/dev/nfs rw " \ 821 "nfsroot=$serverip:$rootpath " \ 822 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 823 "console=$consoledev,$baudrate $othbootargs;" \ 824 "tftp $loadaddr $bootfile;" \ 825 "tftp $fdtaddr $fdtfile;" \ 826 "bootm $loadaddr - $fdtaddr" 827 828 #define CONFIG_RAMBOOTCOMMAND \ 829 "setenv bootargs root=/dev/ram rw " \ 830 "console=$consoledev,$baudrate $othbootargs;" \ 831 "tftp $ramdiskaddr $ramdiskfile;" \ 832 "tftp $loadaddr $bootfile;" \ 833 "tftp $fdtaddr $fdtfile;" \ 834 "bootm $loadaddr $ramdiskaddr $fdtaddr" 835 836 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 837 838 #include <asm/fsl_secure_boot.h> 839 840 #ifdef CONFIG_SECURE_BOOT 841 /* Secure Boot target was not getting build for T4240 because of 842 * increased binary size. So the size is being reduced by removing USB 843 * which is anyways not used in Secure Environment. 844 */ 845 #undef CONFIG_CMD_USB 846 #define CONFIG_CMD_BLOB 847 #endif 848 849 #endif /* __CONFIG_H */ 850