1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 RDB board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_FSL_SATA_V2 14 #define CONFIG_PCIE4 15 16 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 17 18 #ifdef CONFIG_RAMBOOT_PBL 19 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 20 #ifndef CONFIG_SDCARD 21 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 22 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 23 #else 24 #define CONFIG_SPL_FLUSH_IMAGE 25 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 26 #define CONFIG_SYS_TEXT_BASE 0x00201000 27 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 28 #define CONFIG_SPL_PAD_TO 0x40000 29 #define CONFIG_SPL_MAX_SIZE 0x28000 30 #define RESET_VECTOR_OFFSET 0x27FFC 31 #define BOOT_PAGE_OFFSET 0x27000 32 33 #ifdef CONFIG_SDCARD 34 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 35 #define CONFIG_SPL_MMC_MINIMAL 36 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 37 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 38 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 39 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 40 #ifndef CONFIG_SPL_BUILD 41 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 42 #endif 43 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 44 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg 45 #define CONFIG_SPL_MMC_BOOT 46 #endif 47 48 #ifdef CONFIG_SPL_BUILD 49 #define CONFIG_SPL_SKIP_RELOCATE 50 #define CONFIG_SPL_COMMON_INIT_DDR 51 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 52 #endif 53 54 #endif 55 #endif /* CONFIG_RAMBOOT_PBL */ 56 57 #define CONFIG_DDR_ECC 58 59 /* High Level Configuration Options */ 60 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 61 #define CONFIG_MP /* support multiple processors */ 62 63 #ifndef CONFIG_SYS_TEXT_BASE 64 #define CONFIG_SYS_TEXT_BASE 0xeff40000 65 #endif 66 67 #ifndef CONFIG_RESET_VECTOR_ADDRESS 68 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 69 #endif 70 71 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 72 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 73 #define CONFIG_PCIE1 /* PCIE controller 1 */ 74 #define CONFIG_PCIE2 /* PCIE controller 2 */ 75 #define CONFIG_PCIE3 /* PCIE controller 3 */ 76 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 77 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 78 79 #define CONFIG_ENV_OVERWRITE 80 81 /* 82 * These can be toggled for performance analysis, otherwise use default. 83 */ 84 #define CONFIG_SYS_CACHE_STASHING 85 #define CONFIG_BTB /* toggle branch predition */ 86 #ifdef CONFIG_DDR_ECC 87 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 88 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 89 #endif 90 91 #define CONFIG_ENABLE_36BIT_PHYS 92 93 #define CONFIG_ADDR_MAP 94 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 95 96 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 97 #define CONFIG_SYS_MEMTEST_END 0x00400000 98 #define CONFIG_SYS_ALT_MEMTEST 99 100 /* 101 * Config the L3 Cache as L3 SRAM 102 */ 103 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 104 #define CONFIG_SYS_L3_SIZE (512 << 10) 105 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 106 #ifdef CONFIG_RAMBOOT_PBL 107 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 108 #endif 109 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 110 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 111 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 112 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 113 114 #define CONFIG_SYS_DCSRBAR 0xf0000000 115 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 116 117 /* 118 * DDR Setup 119 */ 120 #define CONFIG_VERY_BIG_RAM 121 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 122 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 123 124 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 125 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 126 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 127 128 #define CONFIG_DDR_SPD 129 130 /* 131 * IFC Definitions 132 */ 133 #define CONFIG_SYS_FLASH_BASE 0xe0000000 134 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 135 136 #ifdef CONFIG_SPL_BUILD 137 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 138 #else 139 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 140 #endif 141 142 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 143 #define CONFIG_MISC_INIT_R 144 145 #define CONFIG_HWCONFIG 146 147 /* define to use L1 as initial stack */ 148 #define CONFIG_L1_INIT_RAM 149 #define CONFIG_SYS_INIT_RAM_LOCK 150 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 151 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 152 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 153 /* The assembler doesn't like typecast */ 154 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 155 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 156 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 157 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 158 159 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 160 GENERATED_GBL_DATA_SIZE) 161 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 162 163 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 164 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 165 166 /* Serial Port - controlled on board with jumper J8 167 * open - index 2 168 * shorted - index 1 169 */ 170 #define CONFIG_CONS_INDEX 1 171 #define CONFIG_SYS_NS16550_SERIAL 172 #define CONFIG_SYS_NS16550_REG_SIZE 1 173 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 174 175 #define CONFIG_SYS_BAUDRATE_TABLE \ 176 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 177 178 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 179 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 180 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 181 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 182 183 /* I2C */ 184 #define CONFIG_SYS_I2C 185 #define CONFIG_SYS_I2C_FSL 186 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 187 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 188 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 189 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 190 191 /* 192 * General PCI 193 * Memory space is mapped 1-1, but I/O space must start from 0. 194 */ 195 196 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 197 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 198 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 199 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 200 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 201 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 202 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 203 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 204 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 205 206 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 207 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 208 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 209 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 210 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 211 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 212 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 213 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 214 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 215 216 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 217 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 218 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 219 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 220 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 221 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 222 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 223 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 224 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 225 226 /* controller 4, Base address 203000 */ 227 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 228 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 229 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 230 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 231 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 232 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 233 234 #ifdef CONFIG_PCI 235 #define CONFIG_PCI_INDIRECT_BRIDGE 236 237 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 238 #endif /* CONFIG_PCI */ 239 240 /* SATA */ 241 #ifdef CONFIG_FSL_SATA_V2 242 #define CONFIG_SYS_SATA_MAX_DEVICE 2 243 #define CONFIG_SATA1 244 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 245 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 246 #define CONFIG_SATA2 247 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 248 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 249 250 #define CONFIG_LBA48 251 #endif 252 253 #ifdef CONFIG_FMAN_ENET 254 #define CONFIG_MII /* MII PHY management */ 255 #define CONFIG_ETHPRIME "FM1@DTSEC1" 256 #endif 257 258 /* 259 * Environment 260 */ 261 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 262 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 263 264 /* 265 * Command line configuration. 266 */ 267 268 /* 269 * Miscellaneous configurable options 270 */ 271 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 272 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 273 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 274 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 275 276 /* 277 * For booting Linux, the board info and command line data 278 * have to be in the first 64 MB of memory, since this is 279 * the maximum mapped by the Linux kernel during initialization. 280 */ 281 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 282 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 283 284 #ifdef CONFIG_CMD_KGDB 285 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 286 #endif 287 288 /* 289 * Environment Configuration 290 */ 291 #define CONFIG_ROOTPATH "/opt/nfsroot" 292 #define CONFIG_BOOTFILE "uImage" 293 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 294 295 /* default location for tftp and bootm */ 296 #define CONFIG_LOADADDR 1000000 297 298 #define CONFIG_HVBOOT \ 299 "setenv bootargs config-addr=0x60000000; " \ 300 "bootm 0x01000000 - 0x00f00000" 301 302 #ifndef CONFIG_MTD_NOR_FLASH 303 #else 304 #define CONFIG_FLASH_CFI_DRIVER 305 #define CONFIG_SYS_FLASH_CFI 306 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 307 #endif 308 309 #if defined(CONFIG_SPIFLASH) 310 #define CONFIG_SYS_EXTRA_ENV_RELOC 311 #define CONFIG_ENV_SPI_BUS 0 312 #define CONFIG_ENV_SPI_CS 0 313 #define CONFIG_ENV_SPI_MAX_HZ 10000000 314 #define CONFIG_ENV_SPI_MODE 0 315 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 316 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 317 #define CONFIG_ENV_SECT_SIZE 0x10000 318 #elif defined(CONFIG_SDCARD) 319 #define CONFIG_SYS_EXTRA_ENV_RELOC 320 #define CONFIG_SYS_MMC_ENV_DEV 0 321 #define CONFIG_ENV_SIZE 0x2000 322 #define CONFIG_ENV_OFFSET (512 * 0x800) 323 #elif defined(CONFIG_NAND) 324 #define CONFIG_SYS_EXTRA_ENV_RELOC 325 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 326 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 327 #elif defined(CONFIG_ENV_IS_NOWHERE) 328 #define CONFIG_ENV_SIZE 0x2000 329 #else 330 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 331 #define CONFIG_ENV_SIZE 0x2000 332 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 333 #endif 334 335 #define CONFIG_SYS_CLK_FREQ 66666666 336 #define CONFIG_DDR_CLK_FREQ 133333333 337 338 #ifndef __ASSEMBLY__ 339 unsigned long get_board_sys_clk(void); 340 unsigned long get_board_ddr_clk(void); 341 #endif 342 343 /* 344 * DDR Setup 345 */ 346 #define CONFIG_SYS_SPD_BUS_NUM 0 347 #define SPD_EEPROM_ADDRESS1 0x52 348 #define SPD_EEPROM_ADDRESS2 0x54 349 #define SPD_EEPROM_ADDRESS3 0x56 350 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 351 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 352 353 /* 354 * IFC Definitions 355 */ 356 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 357 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 358 + 0x8000000) | \ 359 CSPR_PORT_SIZE_16 | \ 360 CSPR_MSEL_NOR | \ 361 CSPR_V) 362 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 363 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 364 CSPR_PORT_SIZE_16 | \ 365 CSPR_MSEL_NOR | \ 366 CSPR_V) 367 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 368 /* NOR Flash Timing Params */ 369 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 370 371 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 372 FTIM0_NOR_TEADC(0x5) | \ 373 FTIM0_NOR_TEAHC(0x5)) 374 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 375 FTIM1_NOR_TRAD_NOR(0x1A) |\ 376 FTIM1_NOR_TSEQRAD_NOR(0x13)) 377 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 378 FTIM2_NOR_TCH(0x4) | \ 379 FTIM2_NOR_TWPH(0x0E) | \ 380 FTIM2_NOR_TWP(0x1c)) 381 #define CONFIG_SYS_NOR_FTIM3 0x0 382 383 #define CONFIG_SYS_FLASH_QUIET_TEST 384 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 385 386 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 387 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 388 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 389 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 390 391 #define CONFIG_SYS_FLASH_EMPTY_INFO 392 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 393 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 394 395 /* NAND Flash on IFC */ 396 #define CONFIG_NAND_FSL_IFC 397 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 398 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 399 #define CONFIG_SYS_NAND_BASE 0xff800000 400 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 401 402 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 403 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 404 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 405 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 406 | CSPR_V) 407 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 408 409 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 410 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 411 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 412 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 413 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 414 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 415 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 416 417 #define CONFIG_SYS_NAND_ONFI_DETECTION 418 419 /* ONFI NAND Flash mode0 Timing Params */ 420 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 421 FTIM0_NAND_TWP(0x18) | \ 422 FTIM0_NAND_TWCHT(0x07) | \ 423 FTIM0_NAND_TWH(0x0a)) 424 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 425 FTIM1_NAND_TWBE(0x39) | \ 426 FTIM1_NAND_TRR(0x0e) | \ 427 FTIM1_NAND_TRP(0x18)) 428 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 429 FTIM2_NAND_TREH(0x0a) | \ 430 FTIM2_NAND_TWHRE(0x1e)) 431 #define CONFIG_SYS_NAND_FTIM3 0x0 432 433 #define CONFIG_SYS_NAND_DDR_LAW 11 434 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 435 #define CONFIG_SYS_MAX_NAND_DEVICE 1 436 437 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 438 439 #if defined(CONFIG_NAND) 440 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 441 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 442 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 443 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 444 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 445 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 446 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 447 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 448 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 449 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 450 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 451 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 452 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 453 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 454 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 455 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 456 #else 457 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 458 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 459 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 460 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 461 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 462 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 463 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 464 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 465 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 466 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 467 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 468 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 469 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 470 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 471 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 472 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 473 #endif 474 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 475 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 476 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 477 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 478 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 479 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 480 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 481 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 482 483 /* CPLD on IFC */ 484 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 485 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 486 #define CONFIG_SYS_CSPR3_EXT (0xf) 487 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 488 | CSPR_PORT_SIZE_8 \ 489 | CSPR_MSEL_GPCM \ 490 | CSPR_V) 491 492 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 493 #define CONFIG_SYS_CSOR3 0x0 494 495 /* CPLD Timing parameters for IFC CS3 */ 496 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 497 FTIM0_GPCM_TEADC(0x0e) | \ 498 FTIM0_GPCM_TEAHC(0x0e)) 499 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 500 FTIM1_GPCM_TRAD(0x1f)) 501 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 502 FTIM2_GPCM_TCH(0x8) | \ 503 FTIM2_GPCM_TWP(0x1f)) 504 #define CONFIG_SYS_CS3_FTIM3 0x0 505 506 #if defined(CONFIG_RAMBOOT_PBL) 507 #define CONFIG_SYS_RAMBOOT 508 #endif 509 510 /* I2C */ 511 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 512 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 513 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 514 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 515 516 #define I2C_MUX_CH_DEFAULT 0x8 517 #define I2C_MUX_CH_VOL_MONITOR 0xa 518 #define I2C_MUX_CH_VSC3316_FS 0xc 519 #define I2C_MUX_CH_VSC3316_BS 0xd 520 521 /* Voltage monitor on channel 2*/ 522 #define I2C_VOL_MONITOR_ADDR 0x40 523 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 524 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 525 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 526 527 #define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" 528 #ifndef CONFIG_SPL_BUILD 529 #define CONFIG_VID 530 #endif 531 #define CONFIG_VOL_MONITOR_IR36021_SET 532 #define CONFIG_VOL_MONITOR_IR36021_READ 533 /* The lowest and highest voltage allowed for T4240RDB */ 534 #define VDD_MV_MIN 819 535 #define VDD_MV_MAX 1212 536 537 /* 538 * eSPI - Enhanced SPI 539 */ 540 #define CONFIG_SF_DEFAULT_SPEED 10000000 541 #define CONFIG_SF_DEFAULT_MODE 0 542 543 /* Qman/Bman */ 544 #ifndef CONFIG_NOBQFMAN 545 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 546 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 547 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 548 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 549 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 550 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 551 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 552 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 553 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 554 CONFIG_SYS_BMAN_CENA_SIZE) 555 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 556 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 557 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 558 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 559 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 560 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 561 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 562 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 563 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 564 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 565 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 566 CONFIG_SYS_QMAN_CENA_SIZE) 567 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 568 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 569 570 #define CONFIG_SYS_DPAA_FMAN 571 #define CONFIG_SYS_DPAA_PME 572 #define CONFIG_SYS_PMAN 573 #define CONFIG_SYS_DPAA_DCE 574 #define CONFIG_SYS_DPAA_RMAN 575 #define CONFIG_SYS_INTERLAKEN 576 577 /* Default address of microcode for the Linux Fman driver */ 578 #if defined(CONFIG_SPIFLASH) 579 /* 580 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 581 * env, so we got 0x110000. 582 */ 583 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 584 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 585 #elif defined(CONFIG_SDCARD) 586 /* 587 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 588 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 589 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 590 */ 591 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 592 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 593 #elif defined(CONFIG_NAND) 594 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 595 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 596 #else 597 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 598 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 599 #endif 600 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 601 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 602 #endif /* CONFIG_NOBQFMAN */ 603 604 #ifdef CONFIG_SYS_DPAA_FMAN 605 #define CONFIG_FMAN_ENET 606 #define CONFIG_PHYLIB_10G 607 #define CONFIG_PHY_VITESSE 608 #define CONFIG_PHY_CORTINA 609 #define CONFIG_SYS_CORTINA_FW_IN_NOR 610 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 611 #define CONFIG_CORTINA_FW_LENGTH 0x40000 612 #define CONFIG_PHY_TERANETICS 613 #define SGMII_PHY_ADDR1 0x0 614 #define SGMII_PHY_ADDR2 0x1 615 #define SGMII_PHY_ADDR3 0x2 616 #define SGMII_PHY_ADDR4 0x3 617 #define SGMII_PHY_ADDR5 0x4 618 #define SGMII_PHY_ADDR6 0x5 619 #define SGMII_PHY_ADDR7 0x6 620 #define SGMII_PHY_ADDR8 0x7 621 #define FM1_10GEC1_PHY_ADDR 0x10 622 #define FM1_10GEC2_PHY_ADDR 0x11 623 #define FM2_10GEC1_PHY_ADDR 0x12 624 #define FM2_10GEC2_PHY_ADDR 0x13 625 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 626 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 627 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 628 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 629 #endif 630 631 /* SATA */ 632 #ifdef CONFIG_FSL_SATA_V2 633 #define CONFIG_SYS_SATA_MAX_DEVICE 2 634 #define CONFIG_SATA1 635 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 636 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 637 #define CONFIG_SATA2 638 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 639 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 640 641 #define CONFIG_LBA48 642 #endif 643 644 #ifdef CONFIG_FMAN_ENET 645 #define CONFIG_MII /* MII PHY management */ 646 #define CONFIG_ETHPRIME "FM1@DTSEC1" 647 #endif 648 649 /* 650 * USB 651 */ 652 #define CONFIG_USB_EHCI_FSL 653 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 654 #define CONFIG_HAS_FSL_DR_USB 655 656 #ifdef CONFIG_MMC 657 #define CONFIG_FSL_ESDHC 658 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 659 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 660 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 661 #endif 662 663 664 #define __USB_PHY_TYPE utmi 665 666 /* 667 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 668 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 669 * interleaving. It can be cacheline, page, bank, superbank. 670 * See doc/README.fsl-ddr for details. 671 */ 672 #ifdef CONFIG_ARCH_T4240 673 #define CTRL_INTLV_PREFERED 3way_4KB 674 #else 675 #define CTRL_INTLV_PREFERED cacheline 676 #endif 677 678 #define CONFIG_EXTRA_ENV_SETTINGS \ 679 "hwconfig=fsl_ddr:" \ 680 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 681 "bank_intlv=auto;" \ 682 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 683 "netdev=eth0\0" \ 684 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 685 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 686 "tftpflash=tftpboot $loadaddr $uboot && " \ 687 "protect off $ubootaddr +$filesize && " \ 688 "erase $ubootaddr +$filesize && " \ 689 "cp.b $loadaddr $ubootaddr $filesize && " \ 690 "protect on $ubootaddr +$filesize && " \ 691 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 692 "consoledev=ttyS0\0" \ 693 "ramdiskaddr=2000000\0" \ 694 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 695 "fdtaddr=1e00000\0" \ 696 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 697 "bdev=sda3\0" 698 699 #define CONFIG_HVBOOT \ 700 "setenv bootargs config-addr=0x60000000; " \ 701 "bootm 0x01000000 - 0x00f00000" 702 703 #define CONFIG_LINUX \ 704 "setenv bootargs root=/dev/ram rw " \ 705 "console=$consoledev,$baudrate $othbootargs;" \ 706 "setenv ramdiskaddr 0x02000000;" \ 707 "setenv fdtaddr 0x00c00000;" \ 708 "setenv loadaddr 0x1000000;" \ 709 "bootm $loadaddr $ramdiskaddr $fdtaddr" 710 711 #define CONFIG_HDBOOT \ 712 "setenv bootargs root=/dev/$bdev rw " \ 713 "console=$consoledev,$baudrate $othbootargs;" \ 714 "tftp $loadaddr $bootfile;" \ 715 "tftp $fdtaddr $fdtfile;" \ 716 "bootm $loadaddr - $fdtaddr" 717 718 #define CONFIG_NFSBOOTCOMMAND \ 719 "setenv bootargs root=/dev/nfs rw " \ 720 "nfsroot=$serverip:$rootpath " \ 721 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 722 "console=$consoledev,$baudrate $othbootargs;" \ 723 "tftp $loadaddr $bootfile;" \ 724 "tftp $fdtaddr $fdtfile;" \ 725 "bootm $loadaddr - $fdtaddr" 726 727 #define CONFIG_RAMBOOTCOMMAND \ 728 "setenv bootargs root=/dev/ram rw " \ 729 "console=$consoledev,$baudrate $othbootargs;" \ 730 "tftp $ramdiskaddr $ramdiskfile;" \ 731 "tftp $loadaddr $bootfile;" \ 732 "tftp $fdtaddr $fdtfile;" \ 733 "bootm $loadaddr $ramdiskaddr $fdtaddr" 734 735 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 736 737 #include <asm/fsl_secure_boot.h> 738 739 #endif /* __CONFIG_H */ 740